MarlinKimbra 3D Printer Firmware for Arduino

Version 4.2.9

Warning, this firmware was stopped. For the new version go to https://github.com/MagoKimbra/MK4duo

Special thanks

• all Marlin8bit-developers.

MarlinKimbra 3D Printer Firmware

• Configuration & Compilation
• Supported
  • Features
  • Hardware
  • GCodes
• Notes
  • Auto Bed Leveling
  • Filament Sensor
  • Ramps Servo Power
  • LCD Language - Font - System
• Version
  • Change Log

Configurator Tool Online

http://marlinkimbra.it

Quick Information

This version of Marlin was made to accommodate some requests made by the community RepRap Italy http://forums.reprap.org/index.php?349

The new features are:

• A single Firmware for all types of printers; Cartesian, Delta, SCARA, CoreXY & CoreXZ.
• The possibility of having only one hotend independently from the extruders that you have.
• The addition of the 6th extruder.
• Management Color Mixing Extruder
• System Management MKr4 for 4 extruders width just two drivers and 8 relay.
• System Management MKr6 for 6 extruders width just two drivers and 8 relay.
• Management Multyextruder NPr2, 4/6 extruders with only two engines.
• Management Dual Extruder DONDOLO.
• Adding commands to facilitate purging of hotend.
• Step per unit varied for each extruder as well as the feedrate and the acceleration.
• Adding Debug Dryrun used by repetier.
• Added total Power on time writed in SD CARD.
• Added total Power consumption writed in SD CARD.
• Added total filament printed writed in SD CARD.
• Added anti extruder idle oozing system.
• Added Hysteresis and Z-Wobble correction (only cartesian printers).
• Added support reader TAG width MFRC522
• Added Cooler and Hot Chamber
• Added Laser beam and raster base64
• Addes Mesh Bed Level (MBL)
• Added Stop and Save for Restart (SSR)

Credits

The current MarlinKimbra dev team consists of:

• MagoKimbra - Alberto Cotronei (https://github.com/MagoKimbra)
• simonepri - Simone Primarosa (https://github.com/simonepri)

Laser features have been added by:

• Franco (nextime) Lanza (https://git.nexlab.net/u/nextime)

License

Marlin is published under the GPL license because I believe in open development. Please do not use this code in products (3D printers, CNC etc) that are closed source or are crippled by a patent.