CentrifugalDustSeparator
Centrifugal Dust Separator - MK2 - 3D Files for printing (Beta release)
Support me on: https://www.patreon.com/CapturingDust
Tube suppliers may vary based on your geographic location, and so do the tube dimensions.
Files are adjusted accordingly, see README files in the spesific build versions for suppliers info:
*note: First print the scaling ring to check your tube dimensions. See: https://www.youtube.com/shorts/JZXLTLeB2oE
**note: For parts that are not listed in the subfolders (such as the Y-pieces) see the normal MK2 version.
All parts are designed to print on bambulab build volume(WxDxH) 256 x 256 x 256 mm³.
Only the Y-pieces are not compatable with the Prusa build plate.
YouTube: @CapturingDust
For the test video see:
https://www.youtube.com/watch?v=ENybYVAr11Q&t=1102s
Part 1 of the build video is available on Youtube: https://www.youtube.com/watch?v=bCNDPIjRccw
Part 2 of the build video is available on Youtube: https://www.youtube.com/watch?v=j7K9fEa8Re8
Parts/Supplies:
The MK2 base version is designed for 6" Clear PVC = https://www.amazon.com/dp/B09NJLNW58?psc=1&ref=ppx_yo2ov_dt_b_product_details
EU alternative Acrylic tube 150x3mm (real size 151x3.5mm)= https://www.kunststofforte.nl/product/transparante-acrylaat-buizen-xt/
UK alternative Acrylic tube 150x3mm (real size 150.05x3.1mm)= https://plasticonline.co.uk/150mm-diameter-clear-acrylic-tube.html
O-ring MK2 = https://www.kramp.com/shop-de/de/p/o-ring-140-x-3--OR1403P001
O-Ring MK2_EU = https://www.kramp.com/shop-de/de/p/o-ring-120-x-3--OR1203P001
Collection container = Festool VAB-20/1 part nr. 204294 (204295 in my case because its a pack of 3).
(For US: $79.60 set of 3 - Free shipping: https://www.hartvillehardware.com/product/sku-1337339/festool-dust-extractors-accessories)
Compresion tape: 50 mm x 30 m x 3mm version of this tape: https://bluedolphintapes.com/product/acoustic-tape/
3D printable Systainer T-Loc: https://www.printables.com/model/313989-systainer-t-loc
Original build
Inspired by Pilson Guitars build project
Youtube: https://www.youtube.com/watch?v=R4R9GfCQrW4&
Github: https://github.com/pilsonguitars/centrifugalDustSeparator
Changelog:
06-10-2024: Prusa printable Y-pieces added to folder MK2/STEP
29-09-2024: Changed the README file to better explain the differend design folder.
28-09-2024: I did find out that a normal nut won't lock the impeller assembly for the long run. PLA will shrink/compress over time, and loosens the nut. Use a spring washer & lock nut instead!
14-09-2024: Added the REV2 files of the Y-pieces + brackeds. They need less material to print now by removing the needs for support. Thx @philreindl for the tip!
11-09-2024: In the folder MK2_EU I added the Shaper files (.svg and also the .DXF's) and the Fusion archive files (.f3d) of the baseplate and cleat.
08-09-2024: Parts for the French Cleats added. Fusion file is in the making. Type of compresion tape added.
05-09-2024: Parts for the T-Loc added. Note: I did not print the latch and latch cover (these are just the 3D STEP files I used for the design, feel free to try to 3D print them)
24-08-2024: MK2_EU Inlet and outlet parts adjusted for a better O-ring seal/fit for the 120x3mm O-rings.
19-08-2024: Added 120x3mm O-rings i switced to while building the EU version. Still need to change the parts for a better fit. Will make testprints for this in the next weeks.
10-08-2024: Added BAMBU LAB and OrcaSlicer files to MK2_UK.
07-08-2024: MK2_UK Step Files added for UK version Tube. Not printed of tested yet.
07-08-2024: MK2_EU files added for EU alternative. Not tested jet.
02-08-2024: OrcaSlicer file from mirrored impeller added.
01-08-2024: All .3fm files are available now. Also added all the .stl-files.
29-07-2024: To solve issues with print imperfections on the mirrored impeller; Use the open-source OrcaSlicer and set the wall loop direction to clockwise. Thx @Mik3503 for the tip! (*Go to the GitHub page, scroll down to the assets section and download the latest release compatible with your operating system, and then install it)
21-07-2024: Folder BAMBU LAB added with the .3mf files for Bambu Lab. Added the impeller and impeller-mirror and fixed the Non-manifold edges error. (Working on the other .3fm files to add)