search

MiSTer-devel / Amstrad_MiSTer

Amstrad CPC 6128 for MiSTer
26 stars 15 forks source link

Request: correct video positon according to real HW. #16

Closed lencio closed 2 years ago

lencio commented 2 years ago

I have a problem with the position of the image on the screen of the Amstrad core in several CRT televisions (15hz), using VGA / SCART. Basically the problem is that on some TVs, the core is off-center to the left, even losing the entire edge. On other TVs, the core is off-center to the right, or above the screen, losing the upper edge depending on the model. It is an issue that I have reported in Main_MiSTer and I have been answered (thank you) that it is better to post the problem in each core individually, since it is not possible to implement it at the framework level. It would be great to have a Horizontal / Vertical position control in the OSD to be able to center the image regardless of the TV used. I have tested the real machine on different TVs and curiously the image does come out perfectly centered. I have tried several SONY trinitrons as well, such as SAMSUNG and SANYO models.

sorgelig commented 2 years ago

If i remember right video position in this core fully matches original HW.

lencio commented 2 years ago

If i remember right video position in this core fully matches original HW.

Have you tried different CRTs? the core does not appear the same position on two different televisions. Thanks for your time.

lencio commented 2 years ago

Closure at the request of @tacertain