dmm_util

dmm_util is a utility for interacting with Fluke 289 and 287 Series multimeters. You can:

download saved measurements
download saved recordings
download saved min-max
download peaks
set date and time
set internal data such as company,contact,operator,or site
display realtime measurements
set available record names list
display configuration informations

This is a complete rewrite of Fredrik Valeur dmm_util
Previous one was written in Ruby. This one is written in Python 3.
There are also some changes to the code.

Prerequisites:

Python 3.10+ and pyserial must have been installed before use.

many things have been added as we go along. So the code is not optimal.

Important
All the data displayed are those returned by the multimeter.
None is calculated or processed

How to install it:

- Using PyPi (the simplest way)
  Latest release can be installed by typing:
  python -m pip install fluke_28x_dmm_util
- From github (newest version):
  Latest commit can be used by typing:
  git clone https://github.com/N0ury/dmm_util.git
- From Github release
  
  Get the latest release and unzip (or gunzip) it
  cd to the folder that has been created and run the utility as shown above.

How to run the utility
Main command is:
python -m fluke_28x_dmm_util -p PORT ...

If you have installed the release (.zip or /tgz), you need to change directory to the one of installation. The directory before running the utility MUST be dmm_util.

If you have installed the PyPi version this is not necessary, and you can run the utility anywhere.

Syntax:

python -m fluke_28x_dmm_util options command

options

{-p|--port} PORT
This is mandatory, it's the port to which the DMM is connected (eg: COM3)

{-s|--separator} SEPARATOR
Separator is optional. Default is TAB

{-t|--timeout} TIMEOUT
Timeout is optional. Default is 0.09 (in seconds)
You need to change this only if timeouts occur.

{-o|--overloads}
Don't display lines containing overloads (lines with values 9.99999999e+37) or invalid values
Applie to get recordings only

command
This depends on what you want to do

get:
get recordings {name | index} [,{name | index}...]
get minmax {name | index} [,{name | index}...]
get peak {name | index} [,{name | index}...]
get measurements {name | index} [,{name | index}...]
get current: get current measured values
get config: get DMM configuration
get names: get DMM names prefix used for storing data

'name' is the name used for a recording, 'index' is a number
These data can be displayed with 'list' command,
'name' can be surrounded by quotes in case it contains spaces.
If this parameter contains only digits, value is assumed to be an index.
Otherwise, it will be taken as a name. Multiple names or indexes are permitted, they must be comma separated, with no spaces before or after the commas.

Example:
get recordings 1,"Record 2",5
get recordings 3

This command displays detailed recordings informations

set:
set company : set DMM company name
set operator : set DMM operator name
set site : set DMM site name
set contact : set DMM contact name
set datetime: set DMM date and time to the PC current date/time
set names : set the name of recording at given index

'index' is a value between 1 and 8. List can be obtained using 'get names'.

Example:
set operator N0ury
set name 2 Min_Max

list
list recordings: list recording type recordings
list minmax: list min/max type recordings
list peak: list peak type recordings
list measurements: list all the measurements
list all: list all the memory stored values

This command displays general informations about recordings

Common issues

  File "python3_dmm_util.py", line nn
    match len(name):
            ^
SyntaxError: invalid syntax

You are using Python version less than 3.10, consider upgrading.

Traceback (most recent call last):
  File "python3_dmm_util.py", line 4, in <module>
    import serial
ModuleNotFoundError: No module named 'serial'

pyserial module is needed. Install it this way
python -m pip install pyserial

N0ury / dmm_util

readme

dmm_util