Admin scripts for NEMS Linux.
These are used by the NEMS Linux developers to assist with development of NEMS. These scripts are not designed for end-users (and in fact can cause a lot of damage - so please understand what you're doing before running anything in here).
If you build a custom build of NEMS Linux, please contact Robbie so he can help customize the system (otherwise it will show up as an unknown device and will not present accurate information).
Install Debian on your hardware with the following settings:
Hostname: nems
Root password: nemsadmin
Base user username: nemsadmin
Base user password: nemsadmin
Prep the clean Debian install for NEMS deployment (as root):
apt update && apt install -y ca-certificates wget ssl-cert && /usr/sbin/make-ssl-cert generate-default-snakeoil --force-overwrite && wget --no-check-certificate -O /tmp/nems-prep.sh https://raw.githubusercontent.com/NEMSLinux/nems-admin/master/nems-prep.sh && chmod +x /tmp/nems-prep.sh && /tmp/nems-prep.shor
cd /tmp
wget --no-check-certificate https://nemslinux.com/prep
chmod +x prep
./prepConvert Debian to NEMS Linux (as root):
/root/nems/nems-admin/nems-build.shReboot
Go about testing/configuring your system.
Migrate data to /root/nems/nems-migrator/data folder where applicable. Note: If done unofficially, you will break nems-migrator's ability to update itself from the official repository.
Run nems-cleanup.sh to remove confidential data and restore all settings to defaults (from nems-migrator), preparing your NEMS build for distribution.
This is 100% destructive. NEVER run this on an existing system. This is for new builds ONLY (eg., porting NEMS to a new piece of hardware).
If you are a hardware vendor using this to test if NEMS will function on your hardware, please contact me to discuss making an official build for your hardware. All you need to do is send a device, spec information, and we'll get working on a custom, official build.
More information at https://nemslinux.com