Docker Image for CyberPower PowerPanel Business

This is a Docker image for CyberPower PowerPanel Business served over HTTP or HTTPS. It can be put behind a reverse proxy such as CloudFlare or Traefik, or run standalone.

Usage

Quickstart

If you want to jump right in, take a look at the provided docker-compose.yml.

The default username and password is admin and admin.

Set the environment variable ENABLE_LOGGING to true if you want to retain the standard output and error from the two PowerPanel daemons, ppbd and ppbwd. But make sure to delete these logs periodically. There is nothing keeping these files from filling your storage. These logs will take up about 4 MiB per hour, or about 90 MiB per day.

USB Devices

If you're using the local or both tag, the Docker image will need to be able to access the UPS as a USB device. There are two ways to accomplish this:

Option #1: You could give the container access to the entire USB bus by sharing /dev/usb (and possibly /dev/bus/usb on some distributions). To do this in a docker run command, you would add --device=/dev/usb:/dev/usb (and possibly --device=/dev/bus/usb:/dev/bus/usb) to your command. See docker-compose.yml for an example of how to do this in a compose file.

Option #2: You could share the specific device associated with the UPS, but this has a problem: The device name may suddenly change its name for any number of reasons. Some of them include:

If the UPS is plugged into a different USB port.
If another device is plugged into a USB port before it.
If another device is plugged into a USB port after it.
If the system is rebooted.
If the linux kernel is updated.
If certain software is updated.

Nonetheless, if you want to limit this container's access to other USB devices, you can run the following commands in most modern Linux system shells:

ups_type="Cyber Power"
ups_dev_type="hiddev"
dev_bus_usb_name=$(lsusb | grep "$ups_type" | sed -E -e "s/^Bus ([0-9][0-9][0-9]) Device ([0-9][0-9][0-9]):.+$/\/dev\/bus\/usb\/\1\/\2/")
usb_product_name=$(sudo lsusb -D "$dev_bus_usb_name" 2>/dev/null | grep "iProduct" | sed -E -e "s/\s*iProduct\s*[0-9]*\s*//")
dev_usb_name=$(sudo dmesg | grep "$usb_product_name" | grep "$ups_dev_type" | tail -n 1 | sed -E -e "s/.*$ups_dev_type([0-9]+).*/\/dev\/usb\/$ups_dev_type\1/")
echo "$dev_usb_name"

Note that some UPSs may need a different $ups_type or $ups_dev_type.

For example, let's say $dev_usb_name is /dev/usb/hiddev0. You can then add that to the appropriate part of your docker run command, as --device="/dev/usb/hiddev0:/dev/usb/hiddev0", or, in your compose file, as in the following docker-compose fragment:

devices:
  - "/dev/usb/hiddev0:/dev/usb/hiddev0"

Volumes

The image mounts a volume to /usr/local/PPB/, which contains all PPB programs and data.

See docker-compose.yml for an example of how to mount this in a compose file.

You must use a volume for this. A bind mount obscures files in the container with what is on the host, which will break the container. I've had issues even just bind-mounting the /usr/local/PPB/db_local/ directory.

Network

The image exposes the following ports:

2003 (used by PowerPanel Watchdog process)
3052 (for HTTP access)
53566/udp (for unknown use)
53568/tcp (for HTTPS access)
161/udp (for SNMP)
162/udp (for SNMP)

If you don't enable SNMP or HTTPS, you may be able to get away with exposing only the first three ports, but HTTPS is highly recommended, and SNMP can be useful.

See docker-compose.yml for an example of how to expose these ports.

Registry

This image is available from 3 different registries. Choose whichever you want:

ESXi

You can enable ESXi shutdown (which replaces the local shutdown option) by adding the following line to /usr/local/PPB/etc/config.properties:

isVirtualAppliance = true

See this issue for more info.

Known Issues

The volume contains all of the PowerPanel data, but it also contains all of the executables for the PowerPanel Business software (including a full Java runtime). This is an unfortunate result of how Cyber Power designed their software and will make software updates, migrations, and back-ups much more difficult.
If you need to migrate to a new version of this container or PPB software, you may need to manually save and restore your data. To assist with that, here is a breakdown of the contents of /usr/local/PPB/:

Directory Relative to /usr/local/PPB	Directory Content	Contains User Data?
/db_cloud/	your db if using the cloud service	Yes
/db_local/	your db if not using cloud service	Yes
/extcmd/	*.sh files to run when events happen	Yes
/jre/lib/security/cacerts	your SSL cert if you upload one	Yes
/cert/	possibly your SSL security keys	Probably
/etc/	UPS test results	Probably
/log/	PPB output logs	Probably Not
/uploads/	Unknown	Probably Not
/temp/	uploaded profile files	Probably Not
/.install4j/	installation logs, programs, assets	No
/bin/	PPB executable programs	No
/fonts/	PPB fonts	No
/jre/	PPB's Java Runtime	No
/lib/	PPB program libraries	No
/licenses/	PPB licenses	No
/web/work/	assets for web interface	No
/web-server/	code/assets for web interface	No

SNMP doesn't seem to be working, but someone with more experience with SNMP may be able to get it to work.
It's not clear what ports 2003 and 53566 are used for, but 2003, at least, needs to be exposed.
The names of the log files enabled by ENABLE_LOGGING start with a date and time. That date and time is determined when the container is launched, not when the daemons are started. That means that if you docker exec into a running container and manually restart either daemon, then you will overwrite the older logs.
Since version 450, using a reverse proxy requires extra configuration. Make sure your proxy is setting the header Origin to an empty string. An example Nginx config:
```
location / {
      proxy_pass http://ip:3052;
      proxy_set_header 'Origin' '';
}
```
The local version is broken on recent versions. You can use the both version instead.

NathanVaughn / powerpanel-business-docker

readme