Work in progress. This may void your warranty, proceed at your own risk.
The project is currently under development. Most of the current features come from the original G14Manager
The application can be used without a client but for more advanced configurations, you will need to use one.
Current Features:
When the G15 Manager is first launched it will automatically download the latest client from it's repository
You can open the Web UI by pressing the ROG Key only once (by default), or by going to http://127.0.0.1:34453/.
From there you can easily change any setting you want.
If you encounter an issue with the G15Manager (e.g. does not start, stuff does not work, etc), please download the debug build G15Manager.debug.exe
, and run the binary in a Terminal with Administrator Privileges, then submit an issue with the full logs.
Asus Optimization
provides the necessary drivers (aka atkwmiacpi64
). You may check and see if C:\Windows\System32\DriverStore\FileRepository\asussci2.inf_amd64_xxxxxxxxxxxxxxxx
exists.
G15Manager will most probably not work on other Zephyrus variants. If you have a G14 use this manager instead.
Tested Models:
Asus Optimization (the service) cannot be running, otherwise G15Manager and Asus Optimization will be fighting over control. We only need Asus Optimization (the driver) to be installed so Windows will load atkwmiacpi64.sys
, and thus expose a \\.\ATKACPI
device to be used.
You do not need any other software from Asus (e.g. Armoury Crate, MyAsus, etc) running to use G15Manager; you can safely uninstall them from your system. However, some software (e.g. Asus Optimization) are installed as Windows Services, and you should disable them in Services as they would not provide any value:
In order to use the De-Noising AI, you must keep the folder
DenoiseAIPlugin
from Armoury Crate, then point the G15Manager to the executableArmouryCrate.DenoiseAI.exe
inside that folder.
"ASUS System Control Interface V2" exists as a placeholder so Asus Optimization can have a device "attached" to it, and loads atkwmiacpi64.sys
. The hardware for ASCI is a stud in the DSDT table.
"Armoury Crate Control Interface" also exists as a placeholder (stud in the DSDT table), and I'm not sure what purpose does this serve. Strictly speaking, you may disable this in Device Manager and suffer no ill side effects.
Only two pieces of hardware are useful for taking full control of your G15: "Microsoft ACPI-Compliant Embedded Controller" (this stores the configuration, including your fan curves), and "Microsoft Windows Management Interface for ACPI" (this interacts with the embedded controller in the firmware). Since they are ACPI functions, user-space applications cannot invoke those methods (unless we run WinRing0). Therefore, atkwmiacpi64.sys
exists solely to create a kernel mode device (\\.\ATKACPI
), and an user-space device (\\DosDevices\ATKACPI
) so user-space applications and interface with the firmware (including controlling the fan curve, among other devious things).
Optionally, disable ASUS System Analysis Driver with sc.exe config "ASUSSAIO" start=disabled
in a Terminal with Administrator privileges, if you do not plan to use MyASUS.
It is recommend to run G15Manager.exe
on startup using Task Scheduler, don't forget to check "Run with highest privileges".
You can view example Task Scheduler tasks on this doc.
In order to install this app:
C:\Programs\G15Manager
)After the initial run the G15 Manager will automatically create a folder called "data". This folder will be used to store stuff like the Web UI and temporal files.
When switching Thermal Profiles, the manager will also change the Windows Power Profile.
Important: Currently, the default thermal profiles expect Power Plans "High performance" and "Balanced" to be available. If your installation of Windows does not have those Power Plans, make sure to set the correct ones for each thermal profile.
You can change the fan curves for any given profile by using the Web UI.
Using the Fn + F5
key combo you can cycle through all the "Fast Switch" profiles. By default: Quiet -> Balanced -> Performance -> Turbo.
For battery saving, you can switch the display refresh rate to 60Hz while you are on battery. Use the Fn + F12
key combo to toggle between 60Hz/165Hz refresh rate on the internal display. You can also do so from the Web UI.
Hotkey | Command |
---|---|
ROG Key |
Opens the Web UI |
Fn + F1 |
Mute/Unmute Audio |
Fn + F2 |
Keyboard Brightness Down |
Fn + F3 |
Keyboard Brightness Up |
Fn + F4 |
Play/Pause Media |
Fn + F5 |
Cycle Thermal Profiles |
Fn + F6 |
Screenshot |
Fn + F7 |
Display Brightness Down |
Fn + F8 |
Display Brightness Up |
Fn + F9 |
Display Mirror Settings |
Fn + F10 |
Enable/Disable Touchpad |
Fn + F11 |
Sleep |
Fn + F12 |
Toggle Refresh Rate |
Fn + C |
Disable Dedicated GPU |
Fn + V |
Enable Dedicated GPU |
By default, G15Manager will set the battery limit charge to 60%.
This can be changed using the Web UI.
gcc.exe
rsrc
: go get github.com/akavel/rsrc
syso
file: \path\to\rsrc.exe -arch amd64 -manifest G15Manager.exe.manifest -ico go.ico -o G15Manager.exe.syso
.\scripts\build.ps1
Use .\scripts\run.ps1
.
Most keycodes can be found in reverse_eng/codes.txt, and the repo contains USB and API calls captures for reference.
zllovesuki for the original G14 Manager.
"Go" logo licensed under unsplash license: https://blog.golang.org/go-brand
"Dead computer" logo licensed under Creative Commons: https://thenounproject.com/term/dead-computer/98571/