Fork of plex_autoscan by l3uddz.
Autoscan is a python script that assists in the importing of Sonarr, Radarr, and Lidarr downloads into Plex and/or Jellyfin/Emby.
It does this by creating a web server to accept webhook requests from these apps, and in turn, sends a scan request to media servers. Plex will then only scan the parent folder (i.e. season folder for TV shows, movie folder for movies, and album folders for music) of the media file (versus scanning the entire library folder). For Jellyfin/Emby, whole library will be scanned.
In addition to the above, Autoscan can also monitor Google Drive for updates. When a new file is detected, it is checked against the Plex database and if this file is missing, a new scan request is sent to Plex and/or Jellyfin/Emby ( see section below).
Autoscan is installed on the same server as the Plex and/or Jellyfin/Emby.
cd /opt
sudo git clone https://github.com/niniyas/autoscan
sudo chown -R user:group autoscan
- Run id
to find your user / group.cd autoscan
sudo python -m pip install -r requirements.txt
python scan.py sections
for Plex or python scan.py jesections
for Jellyfin/Emby.- Run once to generate a
default config.json
file./opt/autoscan/config/config.json
- Configure settings (do this before moving on)./opt/autoscan/system/autoscan.service
- Change two instances of YOUR_USER
to your user and group (
do this before moving on).sudo cp /opt/autoscan/system/autoscan.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable autoscan.service
sudo systemctl start autoscan.service
Pulling ghcr.io/niniyas/autoscan:latest
should retrieve the correct image for your arch, but you can also pull
specific arch images via tags.
The architectures supported by this image are:
Architecture | Tag |
---|---|
x86-64 | amd64 |
arm64 | arm64 |
version: "3.9"
services:
autoscan:
container_name: Autoscan
image: ghcr.io/niniyas/autoscan:latest
volumes:
- /path/to/data:/config
- /var/run/docker.sock:/var/run/docker.sock # needed if you are running plex in docker.
- /path/to/plexdb:/plexDb
ports:
- "3468:3468/tcp"
environment:
- PUID=1000
- PGID=1000
- UMASK=002
- TZ=Europe/Brussels
docker run -d \
--name=Autoscan \
-e PUID=1000 \
-e PGID=1000 \
-e UMASK=002 \
-e TZ=Europe/Brussels \
-p 3468:3468/tcp \
-v /path/to/data:/config \
-v /path/to/plexdb:/plexDb \
-v /var/run/docker.sock:/var/run/docker.sock \
ghcr.io/niniyas/autoscan:latest
In most cases you'll need to add additional volumes, to access your files.
Note: It's recommended that you install rclone and Python using chocolatey.
Note: Changes to config file require a restart of the Autoscan service (
e.g. sudo systemctl restart autoscan.service
in Ubuntu).
You can find example config files for both Windows and Ubuntu/Debian in config folder.
"USE_SUDO": true,
USE_SUDO
- This option is typically used in conjunction with PLEX_USER
(e.g. sudo -u plex
). Default is true
.
The user that runs utoscan needs to be able to sudo without a password, otherwise it cannot execute
the PLEX_SCANNER
command as plex
. If the user cannot sudo without password, set this option to false
.
If the user that runs Autoscan is able to run the PLEX_SCANNER
command without sudo or is installed with the
same user account (e.g. plex
), you can you can set this to false
.
Docker specific options.
Note: Some Docker examples used below are based on the image
by plexinc/pms-docker, with /config/
in the container path mapped
to /opt/plex/
on the host. Obvious differences are mentioned between PlexInc and LSIO images.
"USE_DOCKER": true,
"DOCKER_NAME": "plex",
USE_DOCKER
- Set to true
when Plex is in a Docker container. Default is false
.
DOCKER_NAME
- Name of the Plex docker container. Default is "plex"
.
Plex Media Server options.
"ENABLE_PLEX": true,
"PLEX_USER": "plex",
"PLEX_TOKEN": "abcdefghijkl",
"PLEX_LOCAL_URL": "http://localhost:32400",
"PLEX_CHECK_BEFORE_SCAN": false,
"PLEX_WAIT_FOR_EXTERNAL_SCANNERS": true,
"PLEX_ANALYZE_TYPE": "basic",
"PLEX_ANALYZE_DIRECTORY": true,
"PLEX_FIX_MISMATCHED": false,
"PLEX_FIX_MISMATCHED_LANG": "en",
ENABLE_PLEX
- Enable or disable Plex
PLEX_USER
- User account that Plex runs as. This only gets used when either USE_SUDO
or USE_DOCKER
is set
to true
.
"plex"
"abc"
"plex"
.PLEX_TOKEN
- Plex Access Token. This is used for checking Plex's status, emptying trash, or analyzing media.
Run the Plex token script by Werner Beroux: plex_token.sh
or
Read article from Plex Support.
PLEX_LOCAL_URL
- URL of the Plex Media Server. Can be localhost or http/https address.
"http://localhost:32400"
(native install; docker with port 32400 exposed)"https://plex.domain.com"
(custom domain with reverse proxy enabled)PLEX_CHECK_BEFORE_SCAN
- When set to false
, autoscan will not check if plex is reachable.
Default is true
.
PLEX_WAIT_FOR_EXTERNAL_SCANNERS
- When set to true
, wait for other Plex Media Scanner processes to finish, before
launching a new one.
true
.false
.PLEX_ANALYZE_TYPE
- How Plex will analyze the media files that are scanned. Options are off
, basic
, deep
. off
will disable analyzing. Default is basic
.
PLEX_ANALYZE_DIRECTORY
- When set to true
, Plex will analyze all the media files in the parent folder (e.g. movie
folder, season folder) vs just the newly added file. Default is true
.
PLEX_FIX_MISMATCHED
- When set to true
, Autoscan will attempt to fix an incorrectly matched item in Plex.
Autoscan will compare the TVDBID/TMDBID/IMDBID sent by Sonarr/Radarr with what Plex has matched with, and if this match is incorrect, it will autocorrect the match on the item (movie file or TV episode). If the incorrect match is a duplicate entry in Plex, it will auto split the original entry before correcting the match on the new item.
This only works when 1) requests come from Sonarr/Radarr, 2) season folders are being used, and 3) all movies and TV shows have their own unique paths.
Default is false
.
PLEX_FIX_MISMATCHED_LANG
- What language to use for TheTVDB agent in Plex.
"en"
.Note: Verify the settings below by running the Plex Section IDs command (see below).
"PLEX_LD_LIBRARY_PATH": "/usr/lib/plexmediaserver/lib",
"PLEX_SCANNER": "/usr/lib/plexmediaserver/Plex\\ Media\\ Scanner",
"PLEX_SUPPORT_DIR": "/var/lib/plexmediaserver/Library/Application\\ Support",
"PLEX_DATABASE_PATH": "/var/lib/plexmediaserver/Library/Application Support/Plex Media Server/Plug-in Support/Databases/com.plexapp.plugins.library.db",
PLEX_LD_LIBRARY_PATH
"/usr/lib/plexmediaserver/lib"
"/usr/lib/plexmediaserver/lib"
"/usr/lib/plexmediaserver/lib"
PLEX_SCANNER
- Location of Plex Media Scanner binary.
"/usr/lib/plexmediaserver/Plex\\ Media\\ Scanner"
"/usr/lib/plexmediaserver/Plex\\ Media\\ Scanner"
"/usr/lib/plexmediaserver/Plex\\ Media\\ Scanner"
PLEX_SUPPORT_DIR
- Location of Plex "Application Support" path.
"/var/lib/plexmediaserver/Library/Application\\ Support"
"/var/lib/plexmediaserver/Library/Application\\ Support"
"/config/Library/Application\\ Support"
PLEX_DATABASE_PATH
- Location of Plex library database.
"/var/lib/plexmediaserver/Library/Application Support/Plex Media Server/Plug-in Support/Databases/com.plexapp.plugins.library.db"
Running the following command, will return a list of Plex Library Names and their corresponding Section IDs (sorted by alphabetically Library Name):
python scan.py sections
This will be in the format of:
SECTION ID #: LIBRARY NAME
-----------
Path
Sample output:
Plex Sections:
==============
1) Movies
------------
/media/Movies/
When media is upgraded by Sonarr/Radarr/Lidarr, the previous files are then deleted. When Plex gets the scan request after the upgrade, the new media is added in to the library, but the previous media files would still be listed there but labeled as "unavailable".
To remedy this, a trash emptying command needs to be sent to Plex to get rid of these missing files from the library. The options below enable that to happen.
"PLEX_EMPTY_TRASH": true,
"PLEX_EMPTY_TRASH_CONTROL_FILES": [
"/mnt/unionfs/mounted.bin"
],
"PLEX_EMPTY_TRASH_MAX_FILES": 100,
"PLEX_EMPTY_TRASH_ZERO_DELETED": true
PLEX_EMPTY_TRASH
- When set to true
, empty trash of a section after a scan.
PLEX_EMPTY_TRASH_CONTROL_FILES
- Only empty trash when this file exists. Useful when media files, located elsewhere,
is mounted on the Plex Server host. Can be left blank if not needed.
PLEX_EMPTY_TRASH_MAX_FILES
- The maximum amount of missing files to remove from Plex at one emptying trash request. If
there are more missing files than the number listed, the emptying trash request is aborted. This is particularly useful
when externally mounted media temporarily dismounts and a ton of files go "missing" in Plex. Default is 100
.
PLEX_EMPTY_TRASH_ZERO_DELETED
- When set to true
, Autoscan will always empty the trash on the scanned section,
even if there are 0 missing files. If false
, trash will only be emptied when the database returns more than 0 deleted
items. Default is false
.
"ENABLE_JOE": false
"JELLYFIN_EMBY": "jellyfin",
"JOE_API_KEY": "",
"JOE_HOST": "http://localhost:8096"
ENABLE_JOE
- Enable or Disable Jellyfin/Emby.
JELLYFIN_EMBY
- Type of server, jellyfin
or emby
.
JOE_API_KEY
- Jellyfin/Emby API key. Make one at http://<jellyfinoremby_host>/web/index.html#/apikeys.html
.
JOE_HOST
- Jellyfin/Emby server url with no trailing slash.
Running the following command, will return a list of Jellyfin/Emby Library paths:
scan.py jesections
"SERVER_IP": "0.0.0.0",
"SERVER_PASS": "9c4b81fe234e4d6eb9011cefe514d915",
"SERVER_PORT": 3468,
"SERVER_SCAN_DELAY": 180,
"SERVER_USE_SQLITE": true
SERVER_IP
- Server IP that Autoscan will listen on. Default is 0.0.0.0
.
0.0.0.0
- Allow remote access (e.g. Sonarr/Radarr/Lidarr running on another/remote server).
127.0.0.1
- Local access only.
SERVER_PORT
- Port that Autoscan will listen on.
SERVER_PASS
- Autoscan password. Used to authenticate requests from Sonarr/Radarr/Lidarr. Default is a random 32
character string generated during config build.
SERVER_SCAN_DELAY
- How long (in seconds) Autoscan will wait before sending a scan request to Plex.
SERVER_USE_SQLITE
enabled.SERVER_USE_SQLITE
- Option to enable a database to store queue requests. Default is true
.
The benefits to using this are:
Queue will be restored on Autoscan restart, and
Multiple requests to the same folder can be merged into a single folder scan.
Example log:
Already processing '/data/TV/TV-Anime/Persona 5 the Animation/Season 1/Persona 5 the Animation - s01e01 - I am thou, thou art I.mkv' from same folder, aborting adding an extra scan request to the queue.
Scan request from Sonarr for '/data/TV/TV-Anime/Persona 5 the Animation/Season 1/Persona 5 the Animation - s01e01 - I am thou, thou art I.mkv', sleeping for 180 seconds...
The 180
seconds in the example above are from the SERVER_SCAN_DELAY
, if any more requests come in during this
time, the scan request will be delayed by another 180
seconds.
List of paths that will be remapped before being scanned by Plex.
This is particularly useful when receiving scan requests, from a remote Sonarr/Radarr/Lidarr installation, that has different paths for the media.
Format:
"SERVER_PATH_MAPPINGS": {
"/path/on/local/plex/host/": [ <--- Plex Library path
"/path/on/sonarr/host/" <--- Sonarr root path
]
},
Note: This format is used regardless of whether Sonarr is on the same server as Plex or not.
Example:
"SERVER_PATH_MAPPINGS": {
"/mnt/unionfs/": [
"/home/seed/media/fused/"
]
},
Format:
"SERVER_PATH_MAPPINGS": {
"/path/in/plex/container/": [<--- Plex Library path
"/path/from/sonarr/container/" <--- Sonarr root path
]
},
Example:
"SERVER_PATH_MAPPINGS": {
"/data/Movies/": [
"/movies/"
]
},
If the filepath that was reported to Autoscan by Radarr was /home/seed/media/fused/Movies/Die Hard/Die Hard.mkv
then the path that would be scanned by Plex would be /mnt/unionfs/Movies/Die Hard/Die Hard.mkv
.
You can also have more than one folder paths pointing to a single one.
Example:
"SERVER_PATH_MAPPINGS": {
"/data/Movies/": [
"/media/movies/",
"/local/movies/"
]
},
After a SERVER_SCAN_DELAY
, Autoscan will check to see if file exists before sending a scan request to Plex.
"SERVER_MAX_FILE_CHECKS": 10,
"SERVER_FILE_CHECK_DELAY": 60,
"SERVER_SCAN_FOLDER_ON_FILE_EXISTS_EXHAUSTION": false,
SERVER_MAX_FILE_CHECKS
- The number specifies how many times this check will occur, before giving up. If set to 0
,
this check will not occur, and Autoscan will simply send the scan request after the SERVER_SCAN_DELAY
. Default
is 10
.
SERVER_FILE_CHECK_DELAY
- Delay in seconds between two file checks. Default is 60
.
SERVER_SCAN_FOLDER_ON_FILE_EXISTS_EXHAUSTION
- Autoscan will scan the media folder when the file exist checks (as
set above) are exhausted. Default is false
.
List of paths that will be remapped before file exist checks are done.
This is particularly useful when using Docker, since the folder being scanned by the Plex container, may be different to the path on the host system running Autoscan.
Format:
"SERVER_FILE_EXIST_PATH_MAPPINGS": {
"/actual/path/on/host/": [
"/path/from/plex/container/"
]
},
Example:
"SERVER_FILE_EXIST_PATH_MAPPINGS": {
"/mnt/unionfs/media/": [
"/data/"
]
},
You can leave this empty if it is not required:
"SERVER_FILE_EXIST_PATH_MAPPINGS": {
},
"RUN_COMMAND_BEFORE_SCAN": "",
"RUN_COMMAND_AFTER_SCAN": "",
"SERVER_ALLOW_MANUAL_SCAN": false,
"SERVER_IGNORE_LIST": [
"/.grab/",
".DS_Store",
"Thumbs.db"
],
"SERVER_SCAN_PRIORITIES": {
"1": [
"/Movies/"
],
"2": [
"/TV/"
]
},
RUN_COMMAND_BEFORE_SCAN
- If a command is supplied, it is executed before the Plex Media Scanner command.
RUN_COMMAND_AFTER_SCAN
- If a command is supplied, it is executed after the Plex Media Scanner, Empty Trash and
Analyze commands.
SERVER_ALLOW_MANUAL_SCAN
- When enabled, allows GET requests to the webhook URL to allow manual scans on a specific
filepath. Default is false
.
To send a manual scan, you can either:
Visit your webhook url in a browser (e.g. http://ipaddress:3468/0c1fa3c9867e48b1bb3aa055cb86), and fill in the
path to scan.
or
Initiate a scan via HTTP (e.g. curl):
curl -d "eventType=Manual&filepath=/mnt/unionfs/Media/Movies/Shut In (2016)/Shut In (2016) - Bluray-1080p.x264.DTS-GECKOS.mkv" http://ipaddress:3468/0c1fa3c9867e48b1bb3aa055cb86`
SERVER_IGNORE_LIST
- List of paths or filenames to ignore when a requests are sent to Autoscan manually (see
above). Case sensitive.
curl -d "eventType=Manual&filepath=/mnt/unionfs/Media/Movies/Thumbs.db" http://ipaddress:3468/0c1fa3c9867e48b1bb3aa055cb86
would be ignored if Thumbs.db
was in the ignore list.SERVER_SCAN_PRIORITIES
- What paths are picked first when multiple scan requests are being processed.
"SERVER_SCAN_PRIORITIES": {
"PRIORITY LEVEL#": [
"/path/to/library/in/Plex"
],
},
As mentioned earlier, Autoscan can monitor Google Drive for changes. It does this by utilizing a proactive cache ( vs building a cache from start to end).
Once a change is detected, the file will be checked against the Plex database to make sure this is not already there. If this match comes back negative, a scan request for the parent folder is added into the process queue, and if that parent folder is already in the process queue, the duplicate request will be ignored.
"GOOGLE": {
"ENABLED": false,
"CLIENT_ID": "",
"CLIENT_SECRET": "",
"ALLOWED": {
"FILE_PATHS": [ ],
"FILE_EXTENSIONS": true,
"FILE_EXTENSIONS_LIST": [
"webm", "mkv", "flv", "vob", "ogv", "ogg",
"drc", "gif", "gifv", "mng","avi", "mov",
"qt", "wmv", "yuv","rm", "rmvb", "asf",
"amv", "mp4","m4p", "m4v", "mpg", "mp2",
"mpeg", "mpe", "mpv", "m2v", "m4v", "svi",
"3gp", "3g2", "mxf", "roq", "nsv", "f4v",
"f4p", "f4a", "f4b", "mp3", "flac", "ts"
],
"MIME_TYPES": true,
"MIME_TYPES_LIST": [
"video"
]
},
"TEAMDRIVE": false,
"TEAMDRIVES": [ ],
"POLL_INTERVAL": 60,
"SHOW_CACHE_LOGS": false
},
"RCLONE": {
"BINARY": "/usr/bin/rclone",
"CONFIG": "/home/seed/.config/rclone/rclone.conf",
"CRYPT_MAPPINGS": {
"My Drive/encrypt/": [
"gcrypt:"
]
}
},
ENABLED
- Enable or Disable Google Drive Monitoring. Requires one time authorization, see below.
CLIENT_ID
- Google Drive API Client ID.
CLIENT_SECRET
- Google Drive API Client Secret.
ALLOWED
- Specify what paths, extensions, and mime types to whitelist.
FILE_PATHS
- What paths to monitor.
"FILE_PATHS": [
"My Drive/Media/Movies/",
"My Drive/Media/TV/"
],
"FILE_PATHS": [
"My Drive/Media/Movies/",
"My Drive/Media/TV/",
"Shared_Movies/Movies/",
"Shared_Movies/4K_Movies/",
"Shared_TV/TV/"
],
FILE_EXTENSIONS
- To filter files based on their file extensions. Default is true
.
FILE_EXTENSIONS_LIST
- What file extensions to monitor. Requires FILE_EXTENSIONS
to be enabled.
"FILE_EXTENSIONS_LIST": [
"webm","mkv","flv","vob","ogv","ogg","drc","gif",
"gifv","mng","avi","mov","qt","wmv","yuv","rm",
"rmvb","asf","amv","mp4","m4p","m4v","mpg","mp2",
"mpeg","mpe","mpv","m2v","m4v","svi","3gp","3g2",
"mxf","roq","nsv","f4v","f4p","f4a","f4b","mp3",
"flac","ts"
],
MIME_TYPES
- To filter files based on their mime types. Default is true
.
MIME_TYPES_LIST
- What file extensions to monitor. Requires MIME_TYPES
to be enabled.
Example:
"MIME_TYPES_LIST": [
"video"
]
TEAMDRIVE
- Enable or Disable monitoring of changes inside Team Drives. Default is false
.
TEAMDRIVE
setting to take effect, you set this to true
and run the authorize command (see below).TEAMDRIVES
- What Team Drives to monitor. Requires TEAMDRIVE
to be enabled.
Format:
"TEAMDRIVES": [
"NAME_OF_TEAMDRIVE_1",
"NAME_OF_TEAMDRIVE_2"
],
Example:
For 2 Teamdrives named Shared_Movies
and Shared_TV
.
"TEAMDRIVES": [
"Shared_Movies",
"Shared_TV"
],
Note: This is just a list of Teamdrives, not the specific paths within it.
POLL_INTERVAL
- How often (in seconds) to check for Google Drive changes.
SHOW_CACHE_LOGS
- Show cache messages from Google Drive. Default is false
.
BINARY
- Path to rclone binary if not in standard location.
CONFIG
- Path to rclone config file containing rclone Crypt remote configuration. Required for rclone Crypt decoder.
CRYPT_MAPPINGS
- Mapping of path (root or subfolder) of Google Drive crypt (My Drive/
or Team Drive Name/
) to
rclone mount name. These values enable rclone crypt decoder.
encrypt
mapped to rclone crypt mount called gcrypt:
.
"CRYPT_MAPPINGS": {
"My Drive/encrypt/": [
"gcrypt:"
]
},
Shared_TV
mapped to rclone crypt mount called Shared_TV_crypt:
.
"CRYPT_MAPPINGS": {
"Shared_TV/": [
"Shared_TV_crypt:"
]
},
To set this up:
Edit config.json
file, to enable the Google Drive monitoring and fill in your Google Drive API Client ID and
Secret.
"ENABLED": true,
"CLIENT_ID": "yourclientid",
"CLIENT_SECRET": "yourclientsecret",
Next, you will need to authorize Google Drive.
python scan.py authorize
Visit the link shown to get the authorization code and paste that in and hit enter
.
Visit https://accounts.google.com/o/oauth2/v2/auth?scope=https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fdrive&redirect_uri=urn%3Aietf%3Awg%3Aoauth%3A2.0%3Aoob&response_type=code&client_id=&access_type=offline and authorize against the account you wish to use
Enter authorization code:
When access token retrieval is successful, you'll see this:
2018-06-24 05:57:58,252 - INFO - GDRIVE [140007964366656]: Requesting access token for auth code '4/AAAfPHmX9H_kMkMasfdsdfE4r8ImXI_BddbLF-eoCOPsdfasdfHBBzffKto'
2018-06-24 05:57:58,509 - INFO - GDRIVE [140007964366656]: Retrieved first access token!
2018-06-24 05:57:58,511 - INFO - AUTOSCAN [140007964366656]: Access tokens were successfully retrieved!
Note: Message stating Segmentation fault
at the end can be ignored.
You will now need to add in your Google Drive paths into SERVER_PATH_MAPPINGS
. This will tell Autoscan to map
Google Drive paths to their local counterpart.
i. Native install
Format:
"SERVER_PATH_MAPPINGS": {
"/path/on/local/host": [
"/path/on/sonarr/host/",
"path/on/google/drive/"
]
},
_Note 1: The Google Drive path does not start with a forward slash (/
). Paths in My Drive will start with
just My Drive/
. and paths in a Google Teamdrive will start with teamdrive_name/
._
Note 2: Foreign users of Google Drive might not see My Drive
listed on their Google Drive. They can try using
the My Drive/...
path or see what the log shows and match it up to that. One example is Mon\u00A0Drive/
for
French users.
For example, if you store your files under My Drive's Media folder (My Drive/Media/...
), the server path
mappings will look like this:
"SERVER_PATH_MAPPINGS": {
"/mnt/unionfs/Media/Movies/": [
"/home/seed/media/fused/"
"My Drive/Media/Movies/"
],
},
For example, if you store your files under a Google Teamdrive called "shared_movies" and within a Media
folder (shared_movies/Media/...
), the server path mappings will look like this:
"SERVER_PATH_MAPPINGS": {
"/mnt/unionfs/Media/Movies/": [
"/home/seed/media/fused/"
"shared_movies/Media/Movies/"
],
},
ii. Docker install
Format:
"SERVER_PATH_MAPPINGS": {
"/path/in/plex/container/": [
"/path/from/sonarr/container/",
"path/on/google/drive/"
]
},
Note 1: The Google Drive path does not start with a forward slash (/
). Paths in My Drive will start with
just My Drive/
. and paths in a Google Teamdrive will start with teamdrive_name/
.
Note 2: Foreign users of Google Drive might not see My Drive
listed on their Google Drive. They can try using
the My Drive/...
path or see what the log shows and match it up to that. One example is Mon\u00A0Drive/
for
French users.
For example, if you store your files under Google Drive's My Drive Media folder (My Drive/Media/...
) AND run
Plex in a docker container, the server path mappings will look like this:
"SERVER_PATH_MAPPINGS": {
"/data/Movies/": [
"/movies/",
"My Drive/Media/Movies/"
]
}
For example, if you store your files under Google Drive's Teamdrive called "shared_movies" and within a Media
folder (shared_movies/Media/...
) AND run Plex in a docker container, the server path mappings will look like
this:
Format:
"SERVER_PATH_MAPPINGS": {
"/data/Movies/": [
"/movies/",
"NAME_OF_TEAMDRIVE/Media/Movies/"
]
}
Example:
"SERVER_PATH_MAPPINGS": {
"/data/Movies/": [
"/movies/",
"shared_movies/Media/Movies/"
]
}
rclone crypt Support - If your mounted Google Drive is encrypted using rclone crypt, Autoscan can also decode the filenames for processing changes. This includes drives/team drives entirely encrypted or just a subfolder.
Configure rclone values. Example below:
"RCLONE": {
"BINARY": "/usr/bin/rclone",
"CONFIG": "/home/seed/.config/rclone/rclone.conf",
"CRYPT_MAPPINGS": {
"My Drive/encrypt/": [
"gcrypt:"
]
}
},
Disable mime type checking in your config file. This is not currently supported with rclone Crypt Decoding. rclone crypt encodes file paths and encrypts files causing Google Drive to reports all files in a crypt as '" mimeType": "application/octet-stream"'.
"MIME_TYPES": false
Add in your rclone crypt paths on Google Drive into 'SERVER_PATH_MAPPINGS'. This will tell Autoscan to map rclone crypt paths on Google Drive to their local counterpart.
"SERVER_PATH_MAPPINGS": {
"/home/seed/media/": [
"My Drive/encrypt/"
]
},
Google Drive Monitoring is now setup.
Note: This if for rclone mounts using the "cache" or "vfs" backends.
When RC_CACHE_REFRESH
is enabled, if a file exist check fails (as set in SERVER_FILE_EXIST_PATH_MAPPINGS
), Plex
Autoscan will keep sending a rclone cache/expire or vfs/refresh requests, for that file's parent folder, until the file
check succeeds.
For example, if the file /mnt/unionfs/Media/A Good Movie (2000)/A Good Movie.mkv
doesn't exist locally, then a clear
cache request will be sent to the remote for A Good Movie (2000)
folder, on the rclone remote. But if a file exist
checks fails again, it will move to the parent folder and try to clear that (eg Media
), and keep doing this until a
file check exists comes back positive or checks count reaches SERVER_MAX_FILE_CHECKS
.
"RCLONE": {
"RC_CACHE_REFRESH": {
"ENABLED": false,
"FILE_EXISTS_TO_REMOTE_MAPPINGS": {
"Media/": [
"/mnt/unionfs/Media/"
]
},
"RC_URL": "http://localhost:5572"
}
},
ENABLED
- enable or disable cache clearing.
FILE_EXISTS_TO_REMOTE_MAPPINGS
- maps local mount path to rclone remote one. Used during file exists checks.
Format:
"FILE_EXISTS_TO_REMOTE_MAPPINGS": {
"folder_on_rclone_remote/": [
"/path/to/locally/mounted/folder/"
]
},
RC_URL
- URL and Port rclone RC is set to.
Setup instructions to connect Sonarr/Radarr/Lidarr to Autoscan.
No
Yes
Yes
Yes
POST
Yes
Yes
POST