Personal Hackintosh Guide/Instructions for Dell 7567

Notice

This repo is archived as of Dec 11 (macOS version 10.14.2). The files here can still be used for future releases of macOS with just little tweaking and common sense. Be happy to fork it and develop, or I may unarchive it sometime in the future if I used macOS on this laptop again.

Screenshot

macOS Mojave - 10.14.1

Download Required Files

Check releases

Clover USB Files:
 - drivers64UEFI: HFSPlus.efi (for HFS+ fs), apfs.efi (for apfs fs)

 - kexts/Other: 
   - ApplePS2SmartTouchpad: For initial trackpad & keyboard support
   - FakeSMC: SMC emulator
   - RealtekRT8111: Kext for ethernet support
   - SATA-100-series-unsupported: 
   - USBInjectAll: Injecting USB ports (even for recognizing the bootable USB)

 - config.plist: Initial SMBIOS, USBInjectAll dsdt patches, port limit patches (for usb 3.0)

----------------------------------

Clover Post-Install Files:
 - drivers64UEFI: HFSPlus.efi (for HFS+ fs), apfs.efi (for apfs fs)

 - /L/E Kexts:
   - ACPIBatteryManager: Kext for battery status
   - AppleBacklightFixup: Kext for backlight control
   - CodecCommander: Kext for solving 'no audio' after sleep
   - VoodooPS2Controller: Kext for keyboard

 - kexts/Other:
   - AppleALC: Kext for audio
   - AppleBacklightFixup: Kext for backlight control even in recovery 
   - FakeSMC: SMC emulator
   - Lilu: Generic kext patches
   - RealtekRT8111: Kext for ethernet support
   - SATA-100-series-unsupported: 
   - USBInjectAll: Injecting USB ports
   - VoodooI2C*: Kext for precision trackpad
   - VoodooPS2Controller: Kext for keyboard
   - WhateverGreen: Lilu plugin for various iGPU patches

 - config.plist:
   - DSDT Fixes: FixHPET, FixHeaders, FixIPIC, FixRTC, FixTMR
   - DSDT Patches: IGPU, IMEI, HDEF, OSI, PRW, VoodooI2C, brightness control patches
   - WhateverGreen properties: Disable unused ports, increase VRAM from 1536->2048 MB
   - Kernel and Kext Patches: DellSMBIOS, AppleRTC, KernelLapic, KernelPm
   - Kernel To Patch: MSR 0xE2, Panic kext logging
   - Kexts to Patch: I2C, SSD Trim, AppleALC patches
   - SMBIOS

 - patched:
   - SSDT-ALS0: Fake ambient light sensor
   - SSDT-BRT6: Brightness control via keyboard
   - SSDT-Disable_DGPU: Disable discrete GPU (Nvidia)
   - SSDT-I2C: VoodooI2C GPIO pinning & disabling VoodooPS2 kext for trackpads and mouses
   - SSDT-PNLF: Backlight ssdt
   - SSDT-PRW: SSDT for usb instant wake
   - SSDT-UIAC: Injecting right usb ports (coniguration for usbinjectall kext)
   - SSDT-XCPM: Injecting plugin-type for power management
   - SSDT-XOSI: Faking OS for the ACPI
   - SSDT_ALC256: CodecCommander config for ALC256 (removes headphone noise)

Notes

Working hackintosh for 10.14 (Mojave) and 10.13.x (High Sierra)
No support for 4k (I don't have a 4k variant). But I think it's just my files + CoreDisplayFixup.kext + DVMT patch
HDMI doesn't work on this hack because it is connected to nvidia card and we disabled it
Any other issues? Just open an issue in this repo!

Known Bugs

Stock wifi doesn't work (needs to be replaced with a compatible one)
SDCard reader (probably fixed by some kext)
2.1 audio (2.0 works)
Audio via headphones after sleep (This actually worked on previous releases, so may be need to downgrade AppleALC to tested version like 1.2.8)
Built-in mic for headphones may not work

Specs

Intel i7-7700HQ CPU
Intel HD Graphics 630 / nVidia GTX 1050 Ti
16GB 2400MHz DDR4 RAM
15.6” 1080p IPS Display
128GB SanDisk M.2 SSD (SATA)
1TB 5400RPM Western Digital HDD

Prerequisites

Set BIOS options properly:
- Disable Legacy Option ROMs
- Change SATA operation to AHCI (If already using windows, google how to)
- Disable Secure Boot
- VT for Direct I/O (VT-d) is disabled
USB with >= 16GB, preferably USB 2.0 (3.0 is known to cause problems)
common_sense.exe

Creating macOS USB

# Figure out identifier for of your usb (/dev/diskX, for example)
diskutil list

# Partition your usb in GPT
diskutil partitionDisk /dev/diskX 1 GPT HFS+J "install_osx" R

# Copy installer image (for highsierra)
sudo "/Applications/Install macOS High Sierra.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_osx --nointeraction

# Copy installer imge (for mojave)
sudo "/Applications/Install macOS Mojave.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_osx --applicationpath "/Applications/Install macOS Mojave.app" --nointeraction

# Rename (for highsierra)
sudo diskutil rename "Install macOS High Sierra" install_osx

# Rename (for mojave)
sudo diskutil rename "Install macOS Mojave" install_osx

Download and install clover on usb

Download clover
Run the installer
Select the target of the install to "install_osx" using "Change Install Location"
Select Customize
Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically select
check "Metal" from Themes
Check "OsxAptioFix3Drv-64" from Drivers64UEFI
Install Clover
Place the files from given zip file (from this repo) into your EFI/Clover folder in usb accordingly.

Booting USB and Installing macOS

Press F12 repeatedly for one-time boot-menu and select your usb
Choose install_osx in clover (preferably boot with -v option)
Open diskutility and format the partition into HFS+J or apfs and label the partition (eg. macOS)
Using HFS+J instead of apfs on your SSD for 10.13.x:
- Target volume must already be formatted with HFS+J
- Open Terminal from the Utilities menu in the macOS installer and type:
```
"/Volumes/Image Volume/Install macOS High Sierra.app/Contents/Resources/startosinstall" --volume the_target_volume --converttoapfs NO --agreetolicense
```
- Choose the_target_volume depending on how you named your partition (eg. /Volumes/macOS)
Using HFS+J on 10.14 is somewhat buggy right now, better to use APFS
System now automatically reboots, boot again into clover, but now select 'Install macOS High Sierra' (or 'Install macOS Mojave') instead of 'install_osx'

Post Installation

Download and Install clover bootloader

Download clover
Run the installer
Select the target of the install to "Target Volume" using "Change Install Location"
Select Customize
Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically select
check "Metal" from Themes
Check "OsxAptioFix3Drv-64" from Drivers64UEFI
Check "EmuVariableUefi-64.efi" from Drivers64UEFI
Select "Install RC scripts on target volume"

Configure Clover and your System

Replace the existing config.plist with the config.plist from “Clover Post-Install Files”
Add the two EFI drivers from “Clover Post-Install Files”/drivers64UEFI to <EFI Partition>/EFI/CLOVER/drivers64UEFI, and remove VBoxHfs-64.efi from /EFI/CLOVER/drivers64UEFI
Add the included SSDTs in patched folder into your <EFI Partition>/EFI/CLOVER/ACPI/patched folder
Copy all of the kexts that are located in Clover Post-Install Files/"Clover/Other Kexts" folder to <EFI Partition>/EFI/Clover/Other on your system.
Copy all of the kexts that are located in Clover Post-Install Files/"/L/E Kexts" folder to /Library/Extensions on your system.
Run Scripts/fixPermissions.sh from given release as root to fix kext permissions
Reboot the laptop and boot with '-f' command line option (press space at clover)
Rebuild the cache using sudo kextcache -i /
Reboot

Disable Hibernation

sudo pmset -a hibernatemode 0
sudo rm /var/vm/sleepimage
sudo mkdir /var/vm/sleepimage
sudo pmset -a standby 0
sudo pmset -a autopoweroff 0
sudo pmset -a powernap 0

Troubleshooting

1) Backlight level is not persisting across reboot

Boot into macOS
Mount EFI folder and delete nvram.plist in the folder
Clear nvram variables from terminal using sudo nvram -c
Reboot into Clover
Open Clover UEFI Shell and type following commands:
```
FS0: 
cd EFI 
dmpstore -all -s dmpvars.txt
```
Find the GUID of the backlight-level variable (same for all macOS nvram variables) and type the following command in the same shell:
```
dmpstore -d -guid <GUID of macOS variables> 
exit
```
Reboot

2) Sound is not working

Some higher versions of AppleALC doesn't seem to work properly. So install a tested version like 1.2.8
Make sure Lilu is installed & AppleALC is loaded after Lilu: If you use /L/E for kexts, make sure you have LiluFriend.kext and correctly configured
If you have FakePCIID kexts, remove them. These patches are already included in AppleALC(atleast in 1.2.8) and are not needed
Make sure kexts are loading properly. Sometimes kexts fail to load due to improper permissions. Use Scripts/fixPersmissions.sh
If none of the above worked, try posting in forums like tonymacx86.com

3) Fonts look blurry in mojave

Apple nuked subpixel antialiasing in mojave, making non-retina screens blurry
This effect is noticable in 1080p but doesnt affect 4k or retina displays

The following makes things somewhat better:


# Type these commands in terminal and re-login to see the changes

defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO defaults -currentHost write -globalDomain AppleFontSmoothing -int 2

 - If you want to revert back to original settings:
```bash
# Type these commands in terminal and re-login to see the changes

defaults -currentHost delete -globalDomain AppleFontSmoothing
defaults write -g CGFontRenderingFontSmoothingDisabled -bool YES

4) Scrolling is choppy with third party mice

Use this tool: https://mos.caldis.me/, works well
Scroll direction can also be set via this tool

5) Clover USB is not booting

Probably needs port limit patch in config.plist for the OS version you are using (just google it)
Preferably, use USB 2.0 for avoiding port limit errors

Credits

Rehabman
AGuyWhoIsBored
Me (For putting this together & adding many required patches(see commits))

Nihhaar / Hackintosh-Dell-7567

readme