Hiredis-cluster is a C client library for cluster deployments of the Redis database.
Hiredis-cluster is using Hiredis for the connections to each Redis node.
Hiredis-cluster is a fork of Hiredis-vip, with the following improvements:
hiredis
is an external dependency rather than a builtin part
of the cluster client, meaning that the latest hiredis
can be used.Redis Cluster
Multi-key commands
MSET
, MGET
and DEL
.Pipelining
Asynchronous API
SSL/TLS
IPv6
Prerequisites:
libevent-dev
in Debian); can be avoided
if building without tests (DISABLE_TESTS=ON)libssl-dev
in Debian) if building with TLS supportHiredis-cluster will be built as a shared library libhiredis_cluster.so
and
it depends on the hiredis shared library libhiredis.so
.
When SSL/TLS support is enabled an extra library libhiredis_cluster_ssl.so
is built, which depends on the hiredis SSL support library libhiredis_ssl.a
.
A user project that needs SSL/TLS support should link to both libhiredis_cluster.so
and libhiredis_cluster_ssl.so
to enable the SSL/TLS configuration API.
$ mkdir build; cd build
$ cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo -DENABLE_SSL=ON ..
$ make
The following CMake options are available:
DOWNLOAD_HIREDIS
OFF
CMake will search for an already installed hiredis (for example the
the Debian package libhiredis-dev
) for header files and linkage.ON
(default) hiredis will be downloaded from
Github, built and installed locally in
the build folder.ENABLE_SSL
OFF
(default)ON
Enable SSL/TLS support and build its tests (also affect hiredis when
DOWNLOAD_HIREDIS=ON
).DISABLE_TESTS
OFF
(default)ON
Disable compilation of tests (also affect hiredis when
DOWNLOAD_HIREDIS=ON
).ENABLE_IPV6_TESTS
OFF
(default)ON
Enable IPv6 tests. Requires that IPv6 is
setup in Docker.ENABLE_COVERAGE
OFF
(default)ON
Compile using build flags that enables the GNU coverage tool gcov
to provide test coverage information. This CMake option also enables a new
build target coverage
to generate a test coverage report using
gcovr.USE_SANITIZER
Compile using a specific sanitizer that detect issues. The value of this
option specifies which sanitizer to activate, but it depends on support in the
compiler.
Common option values are: address
, thread
, undefined
, leak
Options needs to be set with the -D
flag when generating makefiles, e.g.
cmake -DENABLE_SSL=ON -DUSE_SANITIZER=address ..
The build uses CMake's find_package
to search for a hiredis
installation. CMake will search for a hiredis
installation in the default paths, searching for a file called hiredis-config.cmake
.
The default search path can be altered via CMAKE_PREFIX_PATH
or
as described in the CMake docs; a specific path can be set using a flag like:
-Dhiredis_DIR:PATH=${MY_DIR}/hiredis/share/hiredis
See examples/using_cmake_separate/build.sh
or
examples/using_cmake_externalproject/build.sh
for alternative CMake builds.
The list of commands and the position of the first key in the command line is
defined in cmddef.h
which is included in this repo. It has been generated
using the JSON files describing the syntax of each command in the Redis
repository, which makes sure hiredis-cluster supports all commands in Redis, at
least in terms of cluster routing. To add support for custom commands defined in
Redis modules, you can regenerate cmddef.h
using the script gencommands.py
.
Use the JSON files from Redis and any additional files on the same format as
arguments to the script. For details, see the comments inside gencommands.py
.
When a simpler build setup is preferred a provided Makefile can be used directly when building. A benefit of this, instead of using CMake, is that it also provides a static library, a similar limitation exists in the CMake files in hiredis v1.0.0.
The only option that exists in the Makefile is to enable SSL/TLS support via USE_SSL=1
By default the hiredis library (and headers) installed on the system is used,
but alternative installations can be used by defining the compiler flags
CFLAGS
and LDFLAGS
.
See examples/using_make/build.sh
for an
example build using an alternative hiredis installation.
Build failures like
hircluster_ssl.h:33:10: fatal error: hiredis/hiredis_ssl.h: No such file or directory
indicates that hiredis is not installed on the system, or that a given CFLAGS
is wrong.
Use the previous mentioned build example as reference.
Prerequisites:
sudo cpan JSON
.Some tests needs a Redis cluster and that can be setup by the make targets
start
/stop
. The clusters will be setup using Docker and it may take a while
for them to be ready and accepting requests. Run make start
to start the
clusters and then wait a few seconds before running make test
.
To stop the running cluster containers run make stop
.
$ make start
$ make test
$ make stop
If you want to set up the Redis clusters manually they should run on localhost using following access ports:
Cluster type | Access port |
---|---|
IPv4 | 7000 |
IPv4, authentication needed, password: secretword |
7100 |
IPv6 | 7200 |
IPv4, using TLS/SSL | 7300 |
The function redisClusterContextInit
is used to create a redisClusterContext
.
The context is where the state for connections is kept.
The function redisClusterSetOptionAddNodes
is used to add one or many Redis Cluster addresses.
The functions redisClusterSetOptionUsername
and
redisClusterSetOptionPassword
are used to configure authentication, causing
the AUTH command to be sent on every new connection to Redis.
For more options, see the file hircluster.h
.
The function redisClusterConnect2
is used to connect to the Redis Cluster.
The redisClusterContext
struct has an integer err
field that is non-zero when the connection is
in an error state. The field errstr
will contain a string with a description of the error.
After trying to connect to Redis using redisClusterContext
you should check the err
field to see
if establishing the connection was successful:
redisClusterContext *cc = redisClusterContextInit();
redisClusterSetOptionAddNodes(cc, "127.0.0.1:6379,127.0.0.1:6380");
redisClusterConnect2(cc);
if (cc != NULL && cc->err) {
printf("Error: %s\n", cc->errstr);
// handle error
}
There is a hook to get notified when certain events occur.
int redisClusterSetEventCallback(redisClusterContext *cc,
void(fn)(const redisClusterContext *cc, int event,
void *privdata),
void *privdata);
The callback is called with event
set to one of the following values:
HIRCLUSTER_EVENT_SLOTMAP_UPDATED
when the slot mapping has been updated;HIRCLUSTER_EVENT_READY
when the slot mapping has been fetched for the first
time and the client is ready to accept commands, useful when initiating the
client with redisClusterAsyncConnect2()
where a client is not immediately
ready after a successful call;HIRCLUSTER_EVENT_FREE_CONTEXT
when the cluster context is being freed, so
that the user can free the event privdata.There is a hook to get notified about connect and reconnect attempts. This is useful for applying socket options or access endpoint information for a connection to a particular node. The callback is registered using the following function:
int redisClusterSetConnectCallback(redisClusterContext *cc,
void(fn)(const redisContext *c, int status));
The callback is called just after connect, before TLS handshake and Redis authentication.
On successful connection, status
is set to REDIS_OK
and the redisContext
(defined in hiredis.h) can be used, for example, to see which IP and port it's
connected to or to set socket options directly on the file descriptor which can
be accessed as c->fd
.
On failed connection attempt, this callback is called with status
set to
REDIS_ERR
. The err
field in the redisContext
can be used to find out
the cause of the error.
The function redisClusterCommand
takes a format similar to printf.
In the simplest form it is used like:
reply = redisClusterCommand(clustercontext, "SET foo bar");
The specifier %s
interpolates a string in the command, and uses strlen
to
determine the length of the string:
reply = redisClusterCommand(clustercontext, "SET foo %s", value);
Internally, hiredis-cluster splits the command in different arguments and will convert it to the protocol used to communicate with Redis. One or more spaces separates arguments, so you can use the specifiers anywhere in an argument:
reply = redisClusterCommand(clustercontext, "SET key:%s %s", myid, value);
Commands will be sent to the cluster node that the client perceives handling the given key. If the cluster topology has changed the Redis node might respond with a redirection error which the client will handle, update its slotmap and resend the command to correct node. The reply will in this case arrive from the correct node.
If a node is unreachable, for example if the command times out or if the connect
times out, it can indicated that there has been a failover and the node is no
longer part of the cluster. In this case, redisClusterCommand
returns NULL and
sets err
and errstr
on the cluster context, but additionally, hiredis
cluster schedules a slotmap update to be performed when the next command is
sent. That means that if you try the same command again, there is a good chance
the command will be sent to another node and the command may succeed.
Hiredis-cluster supports mget/mset/del multi-key commands. The command will be splitted per slot and sent to correct Redis nodes.
Example:
reply = redisClusterCommand(clustercontext, "mget %s %s %s %s", key1, key2, key3, key4);
When there is a need to send commands to a specific node, the following low-level API can be used.
reply = redisClusterCommandToNode(clustercontext, node, "DBSIZE");
This function handles printf like arguments similar to redisClusterCommand()
, but will
only attempt to send the command to the given node and will not perform redirects or retries.
If the command times out or the connection to the node fails, a slotmap update
is scheduled to be performed when the next command is sent.
redisClusterCommandToNode
also performs a slotmap update if it has previously
been scheduled.
To disconnect and free the context the following function can be used:
void redisClusterFree(redisClusterContext *cc);
This function closes the sockets and deallocates the context.
The function redisClusterGetReply
is exported as part of the Hiredis API and can be used
when a reply is expected on the socket. To pipeline commands, the only things that needs
to be done is filling up the output buffer. For this cause, the following commands can be used that
are identical to the redisClusterCommand
family, apart from not returning a reply:
int redisClusterAppendCommand(redisClusterContext *cc, const char *format, ...);
int redisClusterAppendCommandArgv(redisClusterContext *cc, int argc, const char **argv);
/* Send a command to a specific cluster node */
int redisClusterAppendCommandToNode(redisClusterContext *cc, redisClusterNode *node,
const char *format, ...);
After calling either function one or more times, redisClusterGetReply
can be used to receive the
subsequent replies. The return value for this function is either REDIS_OK
or REDIS_ERR
, where
the latter means an error occurred while reading a reply. Just as with the other commands,
the err
field in the context can be used to find out what the cause of this error is.
void redisClusterReset(redisClusterContext *cc);
Warning: You must call redisClusterReset
function after one pipelining anyway.
Warning: Calling redisClusterReset
without pipelining first will reset all Redis connections.
The following examples shows a simple cluster pipeline:
redisReply *reply;
redisClusterAppendCommand(clusterContext,"SET foo bar");
redisClusterAppendCommand(clusterContext,"GET foo");
redisClusterGetReply(clusterContext,&reply); // reply for SET
freeReplyObject(reply);
redisClusterGetReply(clusterContext,&reply); // reply for GET
freeReplyObject(reply);
redisClusterReset(clusterContext);
Hiredis-cluster comes with an asynchronous cluster API that works with many event systems.
Currently there are adapters that enables support for libevent
, libev
, libuv
, glib
and Redis Event Library (ae
). For usage examples, see the test programs with the different
event libraries tests/ct_async_{libev,libuv,glib}.c
.
The hiredis library has adapters for additional event systems that easily can be adapted for hiredis-cluster as well.
There are two alternative ways to initiate a cluster client which also determines how the client behaves during the initial connect.
The first alternative is to use the function redisClusterAsyncConnect
, which initially
connects to the cluster in a blocking fashion and waits for the slotmap before returning.
Any command sent by the user thereafter will create a new non-blocking connection,
unless a non-blocking connection already exists to the destination.
The function returns a pointer to a newly created redisClusterAsyncContext
struct and
its err
field should be checked to make sure the initial slotmap update was successful.
// Insufficient error handling for brevity.
redisClusterAsyncContext *acc = redisClusterAsyncConnect("127.0.0.1:6379", HIRCLUSTER_FLAG_NULL);
if (acc->err) {
printf("error: %s\n", acc->errstr);
exit(1);
}
// Attach an event engine. In this example we use libevent.
struct event_base *base = event_base_new();
redisClusterLibeventAttach(acc, base);
The second alternative is to use redisClusterAsyncContextInit
and redisClusterAsyncConnect2
which avoids the initial blocking connect. This connection alternative requires an attached
event engine when redisClusterAsyncConnect2
is called, but the connect and the initial
slotmap update is done in a non-blocking fashion.
This means that commands sent directly after redisClusterAsyncConnect2
may fail
because the initial slotmap has not yet been retrieved and the client doesn't know which
cluster node to send the command to. You may use the eventCallback
to be notified when the slotmap is updated and the client is ready to accept commands.
An crude example of using the eventCallback can be found in this testcase.
// Insufficient error handling for brevity.
redisClusterAsyncContext *acc = redisClusterAsyncContextInit();
// Add a cluster node address for the initial connect.
redisClusterSetOptionAddNodes(acc->cc, "127.0.0.1:6379");
// Attach an event engine. In this example we use libevent.
struct event_base *base = event_base_new();
redisClusterLibeventAttach(acc, base);
if (redisClusterAsyncConnect2(acc) != REDIS_OK) {
printf("error: %s\n", acc->errstr);
exit(1);
}
Use redisClusterSetEventCallback
with acc->cc
as the context to get notified when certain events occur.
Because the connections that will be created are non-blocking, the kernel is not able to instantly return if the specified host and port is able to accept a connection. Instead, use a connect callback to be notified when a connection is established or failed. Similarily, a disconnect callback can be used to be notified about a disconnected connection (either because of an error or per user request). The callbacks are installed using the following functions:
int redisClusterAsyncSetConnectCallback(redisClusterAsyncContext *acc,
redisConnectCallback *fn);
int redisClusterAsyncSetDisonnectCallback(redisClusterAsyncContext *acc,
redisConnectCallback *fn);
The callback functions should have the following prototype,
aliased to redisConnectCallback
:
void(const redisAsyncContext *ac, int status);
Alternatively, if hiredis
>= v1.1.0 is used, you set a connect callback
that will be passed a non-const redisAsyncContext*
on invocation (e.g.
to be able to set a push callback on it).
int redisClusterAsyncSetConnectCallbackNC(redisClusterAsyncContext *acc,
redisConnectCallbackNC *fn);
The callback function should have the following prototype,
aliased to redisConnectCallbackNC
:
void(redisAsyncContext *ac, int status);
On a connection attempt, the status
argument is set to REDIS_OK
when the connection was successful.
The file description of the connection socket can be retrieved
from a redisAsyncContext as ac->c->fd
.
On a disconnect, the status
argument is set to REDIS_OK
when disconnection was initiated by the user,
or REDIS_ERR
when the disconnection was caused by an error.
When it is REDIS_ERR
, the err
field in the context can be accessed
to find out the cause of the error.
You don't need to reconnect in the disconnect callback. Hiredis-cluster will reconnect by itself when the next command for this Redis node is handled.
Setting the connect and disconnect callbacks can only be done once per context.
For subsequent calls it will return REDIS_ERR
.
In an asynchronous cluster context, commands are automatically pipelined due to the nature of an event loop. Therefore, unlike the synchronous API, there is only a single way to send commands. Because commands are sent to Redis Cluster asynchronously, issuing a command requires a callback function that is called when the reply is received. Reply callbacks should have the following prototype:
void(redisClusterAsyncContext *acc, void *reply, void *privdata);
The privdata
argument can be used to carry arbitrary data to the callback from the point where
the command is initially queued for execution.
The most commonly used functions to issue commands in an asynchronous context are:
int redisClusterAsyncCommand(redisClusterAsyncContext *acc,
redisClusterCallbackFn *fn,
void *privdata, const char *format, ...);
int redisClusterAsyncCommandArgv(redisClusterAsyncContext *acc,
redisClusterCallbackFn *fn, void *privdata,
int argc, const char **argv,
const size_t *argvlen);
int redisClusterAsyncFormattedCommand(redisClusterAsyncContext *acc,
redisClusterCallbackFn *fn,
void *privdata, char *cmd, int len);
These functions works like their blocking counterparts. The return value is REDIS_OK
when the command
was successfully added to the output buffer and REDIS_ERR
otherwise. When the connection is being
disconnected per user-request, no new commands may be added to the output buffer and REDIS_ERR
is
returned.
If the reply for a command with a NULL
callback is read, it is immediately freed. When the callback
for a command is non-NULL
, the memory is freed immediately following the callback: the reply is only
valid for the duration of the callback.
All pending callbacks are called with a NULL
reply when the context encountered an error.
When there is a need to send commands to a specific node, the following low-level API can be used.
int redisClusterAsyncCommandToNode(redisClusterAsyncContext *acc,
redisClusterNode *node,
redisClusterCallbackFn *fn, void *privdata,
const char *format, ...);
int redisClusterAsyncCommandArgvToNode(redisClusterAsyncContext *acc,
redisClusterNode *node,
redisClusterCallbackFn *fn,
void *privdata, int argc,
const char **argv,
const size_t *argvlen);
int redisClusterAsyncFormattedCommandToNode(redisClusterAsyncContext *acc,
redisClusterNode *node,
redisClusterCallbackFn *fn,
void *privdata, char *cmd, int len);
These functions will only attempt to send the command to a specific node and will not perform redirects or retries, but communication errors will trigger a slotmap update just like the commonly used API.
Asynchronous cluster connections can be terminated using:
void redisClusterAsyncDisconnect(redisClusterAsyncContext *acc);
When this function is called, connections are not immediately terminated. Instead, new
commands are no longer accepted and connections are only terminated when all pending commands
have been written to a socket, their respective replies have been read and their respective
callbacks have been executed. After this, the disconnection callback is executed with the
REDIS_OK
status and the context object is freed.
There are a few hooks that need to be set on the cluster context object after it is created.
See the adapters/
directory for bindings to libevent and a range of other event libraries.
A redisClusterNodeIterator
can be used to iterate on all known master nodes in a cluster context.
First it needs to be initiated using redisClusterInitNodeIterator()
and then you can repeatedly
call redisClusterNodeNext()
to get the next node from the iterator.
void redisClusterInitNodeIterator(redisClusterNodeIterator *iter,
redisClusterContext *cc);
redisClusterNode *redisClusterNodeNext(redisClusterNodeIterator *iter);
The iterator will handle changes due to slotmap updates by restarting the iteration, but on the new set of master nodes. There is no bookkeeping for already iterated nodes when a restart is triggered, which means that a node can be iterated over more than once depending on when the slotmap update happened and the change of cluster nodes.
Note that when redisClusterCommandToNode
is called, a slotmap update can
happen if it has been scheduled by the previous command, for example if the
previous call to redisClusterCommandToNode
timed out or the node wasn't
reachable.
To detect when the slotmap has been updated, you can check if the iterator's
slotmap version (iter.route_version
) is equal to the current cluster context's
slotmap version (cc->route_version
). If it isn't, it means that the slotmap
has been updated and the iterator will restart itself at the next call to
redisClusterNodeNext
.
Another way to detect that the slotmap has been updated is to register an event
callback and look for the event
HIRCLUSTER_EVENT_SLOTMAP_UPDATED
.
This library uses random() while selecting a node used for requesting the cluster topology (slotmap). A user should seed the random number generator using srandom() to get less predictability in the node selection.
Hiredis-cluster uses hiredis allocation structure with configurable allocation and deallocation functions. By default they just point to libc (malloc
, calloc
, realloc
, etc).
If you have your own allocator or if you expect an abort in out-of-memory cases, you can configure the used functions in the following way:
hiredisAllocFuncs myfuncs = {
.mallocFn = my_malloc,
.callocFn = my_calloc,
.reallocFn = my_realloc,
.strdupFn = my_strdup,
.freeFn = my_free,
};
// Override allocators (function returns current allocators if needed)
hiredisAllocFuncs orig = hiredisSetAllocators(&myfuncs);
To reset the allocators to their default libc functions simply call:
hiredisResetAllocators();