Nukem9 / dlssg-to-fsr3

Adds AMD FSR 3 Frame Generation to games by replacing Nvidia DLSS-G Frame Generation (nvngx_dlssg).
GNU General Public License v3.0
4.32k stars 159 forks source link

Tested Games #29

Open deividrosante opened 10 months ago

deividrosante commented 10 months ago

Tanks for the mod..i tested in games works great on Cyberpunk 2077, Spiderman Miles Morales, Spiderman Remaster, Ratchet & Crank, and the Witcher..

slyfox8900 commented 10 months ago

How did you get it working in Spiderman? I put it in the main game folder next to the dlss-g dll and its not giving me the "FSR 3" popup window when the game launches. Same with the other sony games

Nixiozen commented 10 months ago

Perfectly working on Alen wake 2 Really appreciate the work Let's gooooo open-source community

slyfox8900 commented 10 months ago

Perfectly working on Alen wake 2 Really appreciate the work Let's gooooo open-source community

What are your settings for Alan Wake 2? its crashing for me with ray tracing enabled and vsync off

GUTS2024 commented 10 months ago

How did you make it work?

deividrosante commented 10 months ago

How did you get it working in Spiderman? I put it in the main game folder next to the dlss-g dll and its not giving me the "FSR 3" popup window when the game launches. Same with the other sony

I used Dlsstweaks.ini to specify the path of the installed game and the Dll that modifies dlss3Fg and the pop-up appeared for me.

Nixiozen commented 10 months ago

Perfectly working on Alen wake 2 Really appreciate the work Let's gooooo open-source community

What are your settings for Alan Wake 2? its crashing for me with ray tracing enabled and vsync off

Rtx 3060 laptop Default medium settings Dlss quality Motion blur and film grain off Rtx and path tracing off

GUTS2024 commented 10 months ago

Trabalhando perfeitamente em Alen wake 2 Realmente aprecio o trabalho Vamos lá, comunidade de código aberto

Quais são suas configurações para Alan Wake 2? está travando para mim com o ray tracing ativado e o vsync desativado

Laptop Rtx 3060 Configurações de mídia padrão Qualidade DLSs Desfoque de movimento e granulação do filme Rtx e rastreamento de caminho desativados

Mine crashes after entering the game

GUTS2024 commented 10 months ago

Trabalhando perfeitamente em Alen wake 2 Realmente aprecio o trabalho Vamos lá, comunidade de código aberto

Quais são suas configurações para Alan Wake 2? está travando para mim com o ray tracing ativado e o vsync desativado

Laptop Rtx 3060 Configurações de mídia padrão Qualidade DLSs Desfoque de movimento e granulação do filme Rtx e rastreamento de caminhos desativados

O meu trava depois de entrar no jogo

When loading the save and entering the campaign the game crashes

slyfox8900 commented 10 months ago

Perfectly working on Alen wake 2 Really appreciate the work Let's gooooo open-source community

What are your settings for Alan Wake 2? its crashing for me with ray tracing enabled and vsync off

Rtx 3060 laptop Default medium settings Dlss quality Motion blur and film grain off Rtx and path tracing off

Fullscreen or borderless?

GUTS2024 commented 10 months ago

image

So far so good, now when you enter the campaign it crashes

Nixiozen commented 10 months ago

image

So far so good, now when you enter the campaign it crashes

Try 546.33 driver

PmNz8 commented 10 months ago

Ratchet & Crank

Could you tell how you installed it in R&C? It works for me in TW3 and CP2077 but not in R&C.

GUTS2024 commented 10 months ago

Did you manage to play the campaign?

imagem Até aí tudo bem, agora quando você entra na campanha ele trava

Experimente o driver 546.33

Did you manage to play the campaign?

deividrosante commented 10 months ago

Ratchet & Crank

Could you tell how you installed it in R&C? It works for me in TW3 and CP2077 but not in

use dlsstweaks.ini to specify the location of the game installed Replace the line with "nvngx_dlssg = C:\Path\To\The\Game\dlssg_dlsstweaks_wrapper.dll".

lionnesquaer commented 10 months ago

Also works with Robocop but only with dlsstweaks, just putting dll in game exe folder dont work.

RGB00255 commented 10 months ago

Ratchet & Crank

Could you tell how you installed it in R&C? It works for me in TW3 and CP2077 but not in

use dlsstweaks.ini to specify the location of the game installed Replace the line with "nvngx_dlssg = C:\Path\To\The\Game\dlssg_dlsstweaks_wrapper.dll".

I can get Dying Light 2 and Portal 2 Prelude RTX to give me the popup with this method but I cannot actually enable frame generation in-game.

moaazassali commented 10 months ago

Try 546.33 driver

Tried updating the driver, fully disabling HDR, no v-sync, even disabled ray tracing just like your settings, and tried both regular and DLSSTweaks version, but neither works for me. Whenever I enable dlss fg, the game crashes. Could you share all your settings? Maybe it's a particular one that causes the crash or something.

Jackich2 commented 10 months ago

hogwarts legacy no see mod

GUTS2024 commented 10 months ago

Experimente o driver 546.33

Tentei atualizar o driver, desabilitando totalmente o HDR, sem v-sync, até mesmo desabilitando o ray tracing, assim como suas configurações, e tentei a versão regular e a DLSSTweaks, mas nenhuma funcionou para mim. Sempre que habilito o dlss fg, o jogo trava. Você poderia compartilhar todas as suas configurações? Talvez seja um problema específico que causa o travamento ou algo assim.

Here I can activate the FG, but when I try to load the save and enter the campaign it crashes

slyfox8900 commented 10 months ago

Ratchet & Crank

Could you tell how you installed it in R&C? It works for me in TW3 and CP2077 but not in

use dlsstweaks.ini to specify the location of the game installed Replace the line with "nvngx_dlssg = C:\Path\To\The\Game\dlssg_dlsstweaks_wrapper.dll".

I downloaded the latest dlss file - 3.5.10 from tech powerup, miles morales gives me the mod pop up about fsr 3 but i can't enable frame gen in the settings menu, its greyed out. My ini file is set like this nvngx_dlssg = E:\Downloads\Marvel's Spider-Man Miles Morales\dlssg_dlsstweaks_wrapper.dll

zEduand commented 10 months ago

Experimente o driver 546.33

Tentei atualizar o driver, desabilitando totalmente o HDR, sem v-sync, até mesmo desabilitando o ray tracing, assim como suas configurações, e tentei a versão regular e a DLSSTweaks, mas nenhuma funcionou para mim. Sempre que habilito o dlss fg, o jogo trava. Você poderia compartilhar todas as suas configurações? Talvez seja um problema específico que causa o travamento ou algo assim.

Here I can activate the FG, but when I try to load the save and enter the campaign it crashes

Same here

FlowersPowerz commented 10 months ago

Ratchet & Crank

Could you tell how you installed it in R&C? It works for me in TW3 and CP2077 but not in

use dlsstweaks.ini to specify the location of the game installed Replace the line with "nvngx_dlssg = C:\Path\To\The\Game\dlssg_dlsstweaks_wrapper.dll".

I downloaded the latest dlss file - 3.5.10 from tech powerup, miles morales gives me the mod pop up about fsr 3 but i can't enable frame gen in the settings menu, its greyed out. My ini file is set like this nvngx_dlssg = E:\Downloads\Marvel's Spider-Man Miles Morales\dlssg_dlsstweaks_wrapper.dll

have the same issue

RealmerFree commented 10 months ago

Working on elden ring, ui blurs a bit but it works good!

iKillThis commented 10 months ago

Working on elden ring, ui blurs a bit but it works good!

How the hell did you manage to make it work in elden ring ?

FlowersPowerz commented 10 months ago

works also with Ac Mirage, but with ghosting on UI

RealmerFree commented 10 months ago

Working on elden ring, ui blurs a bit but it works good!

How the hell did you manage to make it work in elden ring ?

I used Puredark's dlss + fg mod, and then put the dlssg to fsr3 on top.

FlowersPowerz commented 10 months ago

Working on elden ring, ui blurs a bit but it works good!

How the hell did you manage to make it work in elden ring ?

I used Puredark's dlss + fg mod, and then put the dlssg to fsr3 on top.

I have done the same with Ac Mirage