Be Master to multiple Slaves

smarek commented 3 years ago

Currently only one Slave Hytera repeater is supported, allow connecting multiple Slaves and translate all of them to single MMDVM upstream

[x] Local repeater data pair against source IP address
[x] Translation queues should contain source/destination info
[x] Track state per-repeater
[x] Spawn RDAC/DMR protocol handler for each repeater (or distinguish within)
[ ] Add option to disconnect from MMDVM once all Hytera repeaters disconnect, tracking #18
[ ] Logging is kind of messy currently, each incoming and outgoing packet gets logged n-times (n=number of slave repeaters connected)
[ ] missing per-repeater configuration within .ini file, currently defaults are shared between all slaves

@do1kbl

smarek commented 2 years ago

As of https://github.com/OK-DMR/Hytera_Homebrew_Bridge/commit/23aa916cac192e57f311460628e89d034e620b91 multiple repeaters can connect at once to HHB and each will be transported using separate connection to the same MMDVM/Homebrew master, so failure of one slave/thread should not affect others. ID, CALLSIGN, etc.. are taken currently from same configuration but provided SNMP/RDAC work, MMDVM master will see the repeaters by their assigned ID/CALL/...

smarek commented 2 years ago

As od 8dbbe29ff014a6094e8f59c5e22f1e61b0eb05f8 this should work better, since separate Hytera DMR Data UDP port is provided

OK-DMR / Hytera_Homebrew_Bridge

Be Master to multiple Slaves #5