Tank Controller Library

Arduino library for the Open Acidification pH Stat Controller

Use

Development

• Use extras/scripts/install.sh to do the initial install.
• After that use extras/scripts/testAndBuild.sh to test.
• • See this video for an install and test example.
• Push a tag with 'v' in order to build a release
• • Use Ansible to install on oap.cs.wallawalla.edu.
• To build the GUI simulator, see GUI/build.sh.

Install

To install onto an Arduino Mega2560 use the Arduino IDE.

Menus

To navigate through the menus, press 2, 4, 6, or 8 on the keypad.

The following are "hidden" commands:

• From the 'SeeDeviceAddress' command:
  • 'B' goes into an infinite loop that should trigger a reset by the watchdog timer in 8 seconds
  • 'C' regenerates a new (random) MAC address that will take effect on the next restart
• On startup you can avoid the 60-second DHCP attempt by pressing any key

Contributors ✨

Thanks goes to these wonderful people (emoji key):

Kirt Onthank 💼 💻 🎨 🤔 🧑‍🏫	Preston Carman 🐛 💻 🤔 🧑‍🏫 👀	James Foster 💻 🤔 🧑‍🏫 📆 👀 🐛	Kavikick 💻	eucalvo 💻 🐛	Lizj96 💻
khalilxl 💻	atg7000 💻	Caleb Herbel 💻	Lucas Saca 💻	EvanKropf 💻	genevea 💻
Catherine 💻	Dzyre 💻	Paydenb 💻	TaylorSmith28 💻	benwach 💻	John Foster ⚠️ 💻
Trevor Natiuk 🐛 ⚠️ 💻	Suocesky 💻

This project follows the all-contributors specification. Contributions of any kind welcome!

Other

• Libraries lists the external libraries and their licenses.
• For documentation on the Tank Controller Manager, click here
• For documentation on running the Tank Controller Manager on Android, click here