Closed theoryshaw closed 8 years ago
I would like to use a separator, but I want to talk to Dave Bender about it first. I'll let you know what we decide. On Oct 21, 2015 3:07 PM, "Ryan Schultz" notifications@github.com wrote:
Toby, are you going with SS clips or a using a separator btwn steel clip and aluminum?
— Reply to this email directly or view it on GitHub https://github.com/OpeningDesign/Sports_Complex/issues/41#issuecomment-150010312 .
We are going to go with separator between the steel clips and aluminum
Toby Krause Krause Custom Builders 920-285-6490
On Wed, Oct 21, 2015 at 3:11 PM, Toby Krause tobykrause@gmail.com wrote:
I would like to use a separator, but I want to talk to Dave Bender about it first. I'll let you know what we decide. On Oct 21, 2015 3:07 PM, "Ryan Schultz" notifications@github.com wrote:
Toby, are you going with SS clips or a using a separator btwn steel clip and aluminum?
— Reply to this email directly or view it on GitHub https://github.com/OpeningDesign/Sports_Complex/issues/41#issuecomment-150010312 .
Hi @andyeck1 (ping @kraut34)
Could use your guy's help on sizing (on center spacing, etc.) the structural members for the overhangs in the sports complex.
There's two overhang distances. 7ft at the entrances and 5ft for the other locations shown below...
We would like to use 16ft long rough sawn 4x6 (3 3/4" x 5 3/4") cedar timbers for the main structural members and galvanized C furring (or similar) for the purlins spanning between the cedar members.
Here is the sectional sketch...
This is priority, since Foremost needs this to finish their foundation reactions.
Please let me know if you need any other information from me.
Thanks, Ryan