Armbian - ZC-328

Armbian patches for zc-328 board (third party & hobby project, not offical)

How to use

1. Clone this repo to your local machine (or download zip file)
2. Clone armbian repo to your local machine
3. Copy all files in this repo to armbian directory (e.g. /home/username/armbian/build)
4. Run armian build script to build your own image:

   ./compile.sh build BOARD=zc-328 NO_HOST_RELEASE_CHECK=yes BRANCH=current

5. After build process is done, you can find your image in output/images directory (e.g. /home/username/armbian/build/output/images)
6. Flash your image to SD card and enjoy it!

Flashing to EMMC

For flashing to EMMC, you can use rkdeveloptool.
rkdeveloptool is already included in armbian build script, so you can use it directly:

# 0. Put your board into maskrom mode
#    - Connect your board to PC via USB OTG port
#    - Press and hold the "uboot" button near the EMMC chip (This is very important!)
#    - Then connect the 12V power supply

# 1. Download bootloader
/home/username/armbian/build/cache/sources/rkbin-tools/tools/rkdeveloptool db /home/username/armbian/build/cache/sources/rkbin-tools/rk32/rk3288_ubootloader_v1.01.06.bin

# 2. Flash image to EMMC
/home/username/armbian/build/cache/sources/rkbin-tools/tools/rkdeveloptool wl 0 /home/username/armbian/build/output/images/YOUR_IMAGE_FILE.img

# 3. Reboot your board.
/home/username/armbian/build/cache/sources/rkbin-tools/tools/rkdeveloptool rd

# 4. That's all. Enjoy it!

License

This project is licensed under the GPLv2 License - with ABSOLUTELY NO WARRANTY. See the LICENSE file for details.

This project is a hobby project and has nothing to do with the original manufacturer of the zc-328 board.
Please do not contact the original manufacturer for technical support.

Armbian - ZC-328

zc-328主板的armbian补丁（这是一个第三方爱好者项目，非官方作品）

使用说明

1. 将本项目克隆到本地（或者下载zip文件）
2. 将armbian项目克隆到本地
3. 将本项目中的所有文件复制粘贴到armbian目录下（例如/home/username/armbian/build）
4. 运行armbian的编译脚本来编译你自己的镜像：

   ./compile.sh build BOARD=zc-328 NO_HOST_RELEASE_CHECK=yes BRANCH=current

5. 编译完成后，你可以在output/images目录下找到你的镜像（例如/home/username/armbian/build/output/images）
6. 将镜像烧录到SD卡，大功告成！

烧录到EMMC

你可以使用rkdeveloptool来烧录镜像到EMMC。
rkdeveloptool已经包含在armbian的编译脚本中，所以你可以直接使用：

# 0. 将主板进入maskrom模式
#    - 通过USB OTG口将主板连接到电脑
#    - 然后按住EMMC芯片旁边的"uboot"按钮（这一步非常重要！）
#    - 最后连接12V电源

# 1. 下载uboot
/home/username/armbian/build/cache/sources/rkbin-tools/tools/rkdeveloptool db /home/username/armbian/build/cache/sources/rkbin-tools/rk32/rk3288_ubootloader_v1.01.06.bin

# 2. 烧录镜像到EMMC
/home/username/armbian/build/cache/sources/rkbin-tools/tools/rkdeveloptool wl 0 /home/username/armbian/build/output/images/你的镜像文件.img

# 3. 重启主板
/home/username/armbian/build/cache/sources/rkbin-tools/tools/rkdeveloptool rd

# 4. 搞定，大功告成！

软件许可

本项目基于GPLv2协议发布，没有任何担保。更多详情请参阅LICENSE文件。

本项目是一个爱好者项目，与zc-328主板的原始制造商无关。
请不要联系原始制造商寻求技术支持。