hassio-solvis-modbus

Home Assistant Integration for Solvis SC3

Disclaimer

This integration is provided without any warranty or support by Solvis. I do not take responsibility for any problems it may cause in all cases. Use it at your own risk.

Installation

To install this integration, you first need HACS installed. After the installation, you need to add the repository URL in HACS as custom repository: https://github.com/Patrick762/hassio-solvis-modbus You can then search for "Solvis Modbus" in the HACS integrations.

Adding devices

You can add devices via the home assistant integrations page by using the device ip address and setting a name. Sensors will then be added automatically.

Available sensors

• Gas burner power
• Outdoor air temperature
• Outdoor air temperature on your roof (if using solar)
• Cold water temperature
• Flow water temperature
• Domestic water temperature
• Solar fluid temperature (if using solar)
• Solar heat exchanger input and output temperature (if using solar)
• Temperatures of the different layers in the water tank
• Flow rate of solar fluid and domestic water