PeterBLITZ ardupirates issues

PeterBLITZ / ardupirates

Automatically exported from code.google.com/p/ardupirates

1 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Compile error

#44 GoogleCodeExporter opened 8 years ago
0
I need to understand code!!!!!!!

#43 GoogleCodeExporter opened 8 years ago
0
Y6 code

#42 GoogleCodeExporter opened 8 years ago
0
Can't update stable mode pid.

#41 GoogleCodeExporter opened 8 years ago
0
magnetometer problem

#40 GoogleCodeExporter opened 8 years ago
0
Gyro and Acc values swapped

#39 GoogleCodeExporter opened 8 years ago
0
GPS Hold: Integrator limiter evaluation

#38 GoogleCodeExporter opened 8 years ago
0
GPS Hold: gps_err_lon and gps_err_lat may cause a large tilt at second activiation.

#37 GoogleCodeExporter opened 8 years ago
0
ardupirates compatible ardumega2560 error

#36 GoogleCodeExporter opened 8 years ago
3
arducopter pid for 2830-13 850KV

#35 GoogleCodeExporter opened 8 years ago
2
nothing works when I pull the USB cable... - HELP!@#!@#

#34 GoogleCodeExporter opened 8 years ago
0
LP3 camera trigger

#33 GoogleCodeExporter opened 8 years ago
0
GPS hold doesn't work good

#32 GoogleCodeExporter opened 8 years ago
4
Y6 Support

#31 GoogleCodeExporter opened 8 years ago
3
CLI menu does not show up

#30 GoogleCodeExporter closed 8 years ago
1
throttle doesnt work

#29 GoogleCodeExporter closed 8 years ago
1
Bug in Radio.pde by use of #ifdefs and #ifndefs

#28 GoogleCodeExporter closed 8 years ago
1
Compass activated & CLI compass offset initialize

#27 GoogleCodeExporter opened 8 years ago
1
Restart gyro calibration during startup while gyros and accels not stable

#26 GoogleCodeExporter opened 8 years ago
1
Revision 569 Problem

#25 GoogleCodeExporter opened 8 years ago
0
BATTERY_EVENT 1 not working

#24 GoogleCodeExporter opened 8 years ago
0
#define IsAM disable the camera stabilisation

#23 GoogleCodeExporter opened 8 years ago
0
Transmitter roll/pitch/yaw mid

#22 GoogleCodeExporter opened 8 years ago
0
Radio.pde code error

#21 GoogleCodeExporter opened 8 years ago
1
Suggest consolidating CLI and GCS

#20 GoogleCodeExporter opened 8 years ago
11
GPSERR

#19 GoogleCodeExporter closed 8 years ago
2
APM_RC_Class::Init sets timer to 1.5ms, should be 1ms

#18 GoogleCodeExporter opened 8 years ago
6
Suggest: automated MAGCALIBRATION

#17 GoogleCodeExporter closed 8 years ago
4
GPS Hold does not seem to work

#16 GoogleCodeExporter closed 8 years ago
1
Sonar not work together with BMP

#15 GoogleCodeExporter opened 8 years ago
12
Coding conventions

#14 GoogleCodeExporter closed 8 years ago
2
Serial monitor help functionality

#13 GoogleCodeExporter closed 8 years ago
4
rev254 motors.pde xmode

#12 GoogleCodeExporter closed 8 years ago
4
Suggest single point for user-configurable variables

#11 GoogleCodeExporter closed 8 years ago
12
New DIY Drones Mediatek firmware 1.6 support.

#10 GoogleCodeExporter closed 8 years ago
1
FLIGHT_MODE_X control range

#9 GoogleCodeExporter opened 8 years ago
9
Caution! Motors might stop in mid-flight!

#8 GoogleCodeExporter closed 8 years ago
4
Testflights done R212 HExacopter

#7 GoogleCodeExporter opened 8 years ago
11
change of AUX switches in code R212

#6 GoogleCodeExporter closed 8 years ago
1
change of AUX switches in code R212

#5 GoogleCodeExporter closed 8 years ago
1
Testflights done R202

#4 GoogleCodeExporter closed 8 years ago
3
Things that should be changed in the next update

#3 GoogleCodeExporter closed 8 years ago
5
Stop YAW movement if stick is released

#2 GoogleCodeExporter closed 8 years ago
5
Integrate Heading Hold Slope Filter into code

#1 GoogleCodeExporter closed 8 years ago
3