LDJump is an R package to estimate variable recombination rates from population genetic data. It is a unix based program (with a necessary installation of PhiPack), able to estimate the recombination map of sequences in fasta and vcf format. First, the sequences are divided in short segments of user defined length. The constant recombination rate is estimated for every segment with a regression model. This set of estimates is fed in a segmentation algorithm (SMUCE) to estimate the breakpoints of the recombination landscape. A PDF Manual with complete documentation of each function is also available. The publication introducing LDJump can be found here.
Please contact us in case of questions, comments, bug reports, etc...
Author: Philipp Hermann, Fardokhtsadat Mohammadi
E-Mail: philipp.hermann@jku.at, fardokht.fm@gmail.comThis package makes use of several functions of other R-packages, of the software package PhiPack, and it can optionally also make use of LDhat in order to decrease the runtime of LDJump. Here we provide a list of used R-packages, as well as, other software packages:
Notice that Biostrings needs to be installed via Bioconductor. PhiPack as well as the functions dos2unix and awk neeed to be installed too. Additionally, we recommend to also install LDhat which will then enable to compute estimates at lower computational cost. The software packages scrm and ms2dna) only need to be installed when the user wants to estimate a regression model based on simulations under a user input demographic scenario, see Update to Version 0.2.2. In regard to Update to Version 0.3.1, VCFTools is a necessary package. For directions on how to install it, please refer to their package documentation.
The ZIP-File of the package can be downloaded via "Clone or download" as well as the command line:
git clone https://github.com/PhHermann/LDJump.git
R CMD build LDJump
R CMD INSTALL LDJump_<version>.tar.gzUsing R one can also install the .tar.gz file with the following command:
install.packages("/PathToLDJump/LDJump_<version>.tar.gz", repos=NULL, type="source")After loading the package in the workspace one can use the main function LDJump in order to estimate the variable recombination rate for the population of interest. We recommend to use LDJump with the population in fasta-Format. Alternatively, restructuring of vcf-Files is also possible with a implemented function vcfR_to_fasta. Therefore, we used the reference sequence from http://phase3browser.1000genomes.org/Homo_sapiens for our example:
require(LDJump)
LDJump(seqName, alpha = 0.05, segLength = 1000, pathLDhat = "", pathPhi = "", format = "fasta", refName = NULL,
start = NULL, constant = F, status = T, cores = 1, accept = F, demography = F, out = "")Detailed descriptions of the main functions and all adjacent functions computing the recombination map can be found via e.g.
?LDJumpWe provide examples with files in Example. Previous versions (before version 0.2.1) required a set of lookup-tables of LDhat which can still be found in Lookup Tables. However, we recommend to update to the most recent version of LDJump.
A full path to the Phi file of PhiPack needs to be provided as follows pathPhi = "/path/to/Phi". In order to use LDhat to quickly calculate some of the summary statistics please set pathLDhat = "/path/to/LDhat-master".
LDJump can also be used under a set of type I error probabilities alpha. Therefore, the parameter alpha can also be fed with a vector of values such as:
require(LDJump)
LDJump(seqName, alpha = c(0.1, 0.05, 0.01), segLength = 1000, pathLDhat = "", pathPhi = "", format = "fasta",
refName = NULL, start = NULL, constant = F, status = T, cores = 1)LDJump is designed to estimate recombination rates from segments containing information (by SNPs). Therefore, the program checks all segments (based on the given segment lengths) for the number of SNPS. In case of segments without SNPs, the program will inform the user and ask for input providing the following two options:
In order to avoid the user input and accept that LDJump imputes recombination rates for these segments, we have added the parameter accept (by default FALSE), which should then be set to TRUE.
We also included a logical parameter constant in LDJump, which is FALSE by default to estimate variable recombination rates. In the case that constant is set to TRUE, LDJump will provide a constant recombination rate estimator of the whole sequence.
A logical parameter rescale enables to transform the sequence positions to the unit interval if set to TRUE.
An integer parameter cores enables to parallelize LDJump, where the parameter equals the number of cores on which LDJump should run.
A logical parameter status, which is TRUE by default, prints the current status of the calculated segment on screen or to the file LDJump_Status.txt in case of applying LDJump on several cores in parallel.
A logical parameter demography, which is FALSE by default, enables to estimate the recombination rates using a generalized additive regression model (GAM) which is based on simulated samples of populations undergoing demographic effects.
We have implemented a function calcRegMod which computes the regression model for constant estimates by simulating under user defined populations. Therefore, we provide the following example how to obtain the regression models for populations under a bottleneck followed by rapid growth in population sizes.
require(LDJump)
scenario = " -eG 0.0 0 -eG 0.42 -100 -eG 0.5 100 "
simulatedData = calcRegMod(nsim=100,pathToScrm=pathToScrm,scenario=scenario,pathToMs2dna=pathToMs2dna, status = T, pathLDhat = "/path/To/LDhat", pathPhi = "/path/To/Phi")
regMod = simulatedData[[1]]
result = LDJump(seqName = "path/To/seqName", pathLDhat = "/path/To/LDhat", pathPhi = "/path/To/Phi", segLength = 1000, alpha = 0.05, status = T, demography = F, regMod = regMod, status = T, accept = T, cores = 1)Notice that any demographic scenario which is in the range of scrm can be provided with the simulation function. However, we want to stress that the resulting model is not checked for its underlying assumptions of the residuals. Nevertheless, this can and should be done manually, given that the model is in hand after the simulations are performed. Moreover, one can also adapt the sample sizes of the populations (n), the sequence lengths of the simulated populations (len) and the recombination rates. The default values are listed as follows.
n = c(10, 16, 20)
len = c(500, 1000, 2000, 3000, 5000)For each combination of sample sizes and sequence lengths 100 recombination rates are simulated (uniformly distributed per interval) for the 5 following intervals: [0,0.01], [0.01,0.02], [0.02, 0.05], [0.05, 0.1], and [0.1, 0.2]. As noted above, we added the option to provide a vector of recombination rates under which the recombination map should be simulated. Then the mentioned setup using intervals is ignored.
Although we did not explore LDJump under other scenarios such as population structure, we note that principially (given its implementation in scrm it is possible to simulate under any scenario using our calcRegMod function. However, one has to be careful that we did not address other scenarios than the demographic example as provided with the R-package. Hence, one has to be careful with LDJump and self-simulated regression models.
We added an optional parameter out which is a prefix for all outfiles created within LDJump. By default it is an empty string, but when changed to any user defined-string, one can run LDJump in parallel on several data sets from the same working directory without interfering output files.
We have extended LDJump in this update to handle VCF-files successfully. The most important point to adress in regard to working with VCF-files is that converting huge VCF-files to FASTA at once using g.e. functions like vcfR2DNAbin from vcfR proves to be very difficult and time consuming. The workflow of LDJump, nevertheless, requires FASTA files to compute the desired summary statistics, which is why we decided to first slice the VCF-file into several segments using VCFTools. The segmentation is the very first step when running LDJump on VCF-files.
In order to run LDJump on VCF-files, two types of files are required:
Additionally to the filename/filepath, the command to run LDJump on VCF-files also requires the chromosome number, starting and ending position. For example, we could be running our analysis on chromosome 21 - ranging from base pair 41187000 to 41290679. Possible R commands, then, would look like this:
setwd(~/your_directory) #consider setting your working directory in the folder
#in which you have all the files that you will be using (VCF-file, Reference-File)
vcf_file = "TSI_21_41187000_41290679.vcf"
ref_seq = "Reference_CH21_41187000_41290679.fasta"
startofseq = 41187000
endofseq = 41290679
chr = 21A possible command on running LDJump looks like this:
LDJump(vcf_file, chr = chr , segLength = 1000, cores = 8, pathPhi = "/path/To/Phi", format = "vcf", refName = ref_seq, lengthofseq=10000, startofseq = startofseq, endofseq = endofseq)As it is mentioned above, other parameters such as segLength, cores, pathPhi are being used, which are generally necessary and can be referred to in the usual LDJump documentation.
The workflow for FASTA remained the same, but for VCF-files it has changed:
Last but not least: Before LDJump is executed again, the "temp" folder has to be deleted in order for LDJump to work.
For any further questions, please contact Fardokhtsadat Mohammadi: fardokht.fm@gmail.com
We recommend to run LDJump from the same path where the sample file is located in order that all created temp files will be deleted after completion.
Hermann, P., Heissl, A., Tiemann‐Boege, I., and Futschik, A. (2019), LDJump: Estimating Variable Recombination Rates from Population Genetic Data. Mol Ecol Resour. doi:10.1111/1755-0998.12994.