ttn_gateway based on the latest SX1301 driver lora_gateway v5.0.1 and semtech packet_forwarder v4.0.1
The aim of this project is to help users set up a LoRa network easily. The User Guide can be get from our Web.
This project currently provides support for the below platforms.
2019-06-18 RAK V2.8
2019-05-06 RAK V2.5
2019-04-26 RAK V2.4
2019-03-19 RAK V2.2
If you want to use a precompiled firmware image directly, please download the latest one from RAK website: https://www.rakwireless.com/en/download/LoRa/RAK2245-Pi-HAT#Firmware
If you want to install from zore by yourself, please do as the following steps:
step1 : Download and install Raspbian Stretch LITE
step2 : Use "sudo raspi-config" command, enable spi interface
step3 : Clone the installer and start the installation
$ git clone https://github.com/RAKWireless/RAK2245-RAK831-LoRaGateway-RPi-Raspbian-OS.git ~/RAK2245-RAK831-LoRaGateway-RPi-Raspbian-OS
$ cd ~/RAK2245-RAK831-LoRaGateway-RPi-Raspbian-OS
$ sudo ./install.shstep4 : Next you will see some messages as follow. Just hit the Enter key to keep default or enter your information if you want.
Host name [rak-gateway]:
Latitude [0]:
Longitude [0]:
Altitude [0]: step5 : Now you have a running gateway after restart!
step6 (Optional):You can use the command "sudo gateway-config" to select other bands if your hardware supports.
Please have a look at the getting start document on RAK website: https://www.rakwireless.com/en/download/LoRa/RAK2245-Pi-HAT#Application-Notes