rf-ttl

E32-ttl-100 E36-ttl-100

This program can setup the modules E32 and E36 and probably others also.

To program you have to set the M0 and M1 to 1 In combination with the module E15-USB-tl this is easly done with jumpers, remove the jumpers M0 and M1 then you can program the device.

Compile:

make

To Run use:

./program-rf-ttl -d /dev/ttyUSB0 -a7 -s7 -o

Options you can use:

• -d serial port
• -o Write permanent
• -f <0-1> FEC
• -w Waiting time
• -c Communication channel 0-31
• -p <0-3> Output power 0-3 (0=30dBm - 3=21dBm)
• -a <0-7> Air speed 0=1Kbps(default)
  • 1=2Kbps
  • 2=5Kbps
  • 3=8Kbps
  • 4=10Kbps
  • 5=15Kbps
  • 6=20Kbps
  • 7=25Kbps
• -s <0-7> uart speed
  • 0=1200bps
  • 1=2400bps
  • 2=4800bps
  • 3=9600bps
  • 4=19200bps
  • 5=38400bps
  • 6=57600bps
  • 7=115200bps