segger_debug

中文页 | English

segger debug utils, such as SEGGER's Real Time Transfer, SEGGER SystemView porting.

How to use the Segger SystemView trace componment

By Arda.Fu 2016.8.10

1. Copy description file

Copy the 'description\SYSVIEW_RTThread.txt' to folder '%SystemView_Install_Folder%\Description\'.

2. Copy source file

Copy the folder 'trace' to folder '%RTT_ROOT%\components\trace'.

3. Enable trace componment

Enable RT_USING_HOOK and add RT_USING_TRACE define in your bsp's rtconfig.h

// <bool name="RT_USING_TRACE" description="Enable trace" default="true" />
#define RT_USING_TRACE

4. Connect to target board debug interface

Segger SystemView only support Segger J-Link and Segger J-Link OB. If you using the origin development boards from vendor, you can upgrade the on board debugger to J-Link OB.

• For ST ST-Link, here is the ST-Link upgrade utility download page
• For Atmel EDBG, here is the EDBG upgrade utility download page
• For Freescale(NXP) OpenSDA/OpenSDA-V2, here is the OpenSDA upgrade utility download page
• For NXP LPC Link 2, here is the LPC link 2 upgrade utility download page
• NXP LPCXpresso, here is the LPCXpresso upgrade utility download page

5. Intergration (Porting) limitation

• Can only trace thread, scheduler and interrupt.
• Tracing RT-Thread IPC componment is not supported.