Aix (from French Aix-la-Chapelle) Calibration for Building and HVAC Systems
This framework automates the process of calibrating models used in Building and HVAC Simulations.
To install, simply run
pip install aixcalibuha
If you encounter an error with the installation of scikit-learn
, first install scikit-learn
separately and then install aixcalibuha
:
pip install scikit-learn
pip install aixcalibuha
If this still does not work, we refer to the troubleshooting section of scikit-learn
: https://scikit-learn.org/stable/install.html#troubleshooting. Also check issue 23 for updates.
In order to help development, install it as an egg:
git clone --recurse-submodules https://github.com/RWTH-EBC/AixCaliBuHA
pip install -e AixCaliBuHA
The core idea and motivation of AixCaliBuHA
is described in the paper.
The following image illustrates the overall toolchain automated by AixCaliBuHA
.
At the core of AixCaliBuHA
lays the definition of data types, that link the python data types to the underlying optimization problem and are used for all subsequent steps.
This image below illustrates this. For more information, check the paper and the subsequent section on how to get started.
We differ this section into two parts. How to get started with the theory of calibration and how to get started with using this repo.
While we aim at automating most parts of a calibration process, you still have to specify the inputs and the methods you want to use. We therefore recommend to:
We have three services in place to help you with the setup of AixCaliBuHA
. For the basics on using this repo, we recommend the Jupyter Notebook.
If you want to setup your calibration models (in Modelica) and quickly start your first calibration, we provide a guided setup.
We recommend running our jupyter-notebook to be guided through a helpful tutorial.
For this, run the following code:
# If jupyter is not already installed:
pip install jupyter
# Go into your aixcalibuha-folder (cd \path_to_\AixCaliBuHA) or change the to the absolute path of the tutorial.ipynb and run:
jupyter notebook tutorial\tutorial.ipynb
Clone this repo and look at the examples\README.md file. Here you will find several examples to execute.
We provide different plots to make the process of calibration clearer to you. We will go into detail on the different plots, what they tell you and how you can enable/disable them. We refer the plot names with the file names they get.
What do we see? The solver in use was "scipy_differential_evolution" using the "best1bin" method. After around 200 iterations, the solver begins to converge. The last 150 itertions don't yield a far better solution, it is ok to stop the calibration here. You can do this using a KeyboardInterrupt
/ STRG + C
.
How can we enable/disable the plot? Using the show_plot=True
keyword argument (default is True
)
What do we see? The variation of values of the tuner parameters together with their specified boundaries (red lines). The tuner parameters vary significantly in the first 200 iterations. At convergence the values obviously also converge.
How can we enable/disable the plot? Using the show_plot=True
keyword argument (default is True
)
What do we see? The measured and simulated trajectories of our selected goals. The grey part is not used for the evaluation of the objective function. As these values are NaN
, matplotlib may interpolate linearly between the points, so don't worry if the trajectory is not logical in the grey area. Note that the inital values for the class "stationary" are not matching the initial values of the measured data. Even if the parameters are set properly, the objective would yield a bad result. In this case you have to adapt the inital values of your model directly in the Modelica code (see section "Best practices").
How can we enable/disable the plot? Using the create_tsd_plot=True
keyword argument for showing it each iteration, the save_tsd_plot=True
for saving each of these plots. (Default is True
and False
, respectivly.)
What do we see? This plot is generated if you calibrate multiple classes AND different classes pyrtially have the same tuner parameters (an intersection of tuner_paras
). In this case multiple "best" values arise for one tuner parameter. The plot shows the distribution of the tuner-parameters if an intersection is present. You will also be notified in the log file. In the case this plot appears, you have to decide which value to choose. If they differ greatly, you may want to either perform a sensitivity analysis to check which parameter has the biggest impact OR re-evaluate your modelling decisions.
How can we enable/disable the plot? Using the show_plot=True
keyword argument (default is True
)
Please use the following metadata to cite AixCaliBuHA
in your research:
@article{Wuellhorst2022,
doi = {10.21105/joss.03861},
url = {https://doi.org/10.21105/joss.03861},
year = {2022},
publisher = {The Open Journal},
volume = {7},
number = {72},
pages = {3861},
author = {Fabian Wüllhorst and Thomas Storek and Philipp Mehrfeld and Dirk Müller},
title = {AixCaliBuHA: Automated calibration of building and HVAC systems},
journal = {Journal of Open Source Software}
}
Visit our official Documentation.
Please raise an issue here.