Myo4Linux

Direct bluetooth connection between Linux and Myo armband using Bluegiga BGAPI/BGLib

Tested in a Raspberry Pi. video: https://www.youtube.com/watch?v=XVCfGHIiGXw

Thanks to dzhu (https://github.com/dzhu/myo-raw), which greatly helped me improve my basic project.

Pre-requirements for your Myo device

• Firmware version 1.3.1448 or higher
• It is necessary to calibrate your Myo device using the official software.
• Use the Myo dongle bluetooth

Requirements

• python >=2.6
• pySerial
• enum34

Execute Sample

The Myo dongle bluetooth must be connected.

• Open the console "terminal"
• Go to sample folder in the project
• Execute this command:

  python test_myo.py