Contents
GPiCase2 (GPi Case 2 only)
The RetroFlag GPiCase 2 CM4 safe shutdown script will automatically switch between the LCD display and HDMI output when using the dock.
Click the link Jump to install GPiCase2 script:GPiCase2 Script.
GPi Case (GPi Case only)
Turn switch "SAFE SHUTDOWN" to ON.
For RetroPie:
- Make sure internet connected.
- Make sure keyboard connected.
- Press F4 enter terminal.
- In the terminal, type the one-line command below(Case sensitive):
wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/install_gpi.sh" | sudo bash
For Recalbox
- Make sure internet connected.
- Make sure keyboard connected.
- Press F4 first. And then press ALT-F2 enter terminal.
- User: root Password: recalboxroot
- In the terminal, type the one-line command below(Case sensitive):
wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/recalbox_install_gpi.sh" | bash
Pi Case
(nespi+, superpi, megapi,nespi4 case)
RetroFlag Pi-Case Safe Shutdown
Turn switch "SAFE SHUTDOWN" to ON.
Example for RetroPie:
- Make sure internet connected.
- Make sure keyboard connected.
- Press F4 enter terminal.
- In the terminal, type the one-line command below(Case sensitive):
wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/install.sh" | sudo bash
Example for RecalBox:
- Make sure internet connected.
- Make sure keyboard connected.
- Press F4 first. And then press ALT-F2 enter terminal.
- User: root Password: recalboxroot
- In the terminal, type the one-line command below(Case sensitive):
wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/recalbox_install.sh" | bash
Example for batocera:
- Make sure internet connected.
- Make sure keyboard connected.
- Enter terminal. How to enter terminal: https://wiki.batocera.org/access_the_batocera_via_ssh
- User: root Password: linux
- In the terminal, type the one-line command below(Case sensitive):
wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/batocera_install.sh" | bash
Example for lakkatv:
https://github.com/marcelonovaes/lakka_nespi_power