Hi all! This repo contains the revision of the official LD2410 component adapted for the LD2412. Below you can find an example of the configuration, what works and what doesn’t compared to the LD2410 component. This repository is not to be considered production-ready, but rather a starting point for the implementation of this device on EspHome. Unfortunately, I don’t have much time to dedicate to it, so unless someone forks it, progress will be a bit slow.
external_components:
- source:
type: git
url: https://github.com/Rihan9/LD2412
ref: main
components: [LD2412]
LD2412:
id: ld2412
throttle: 3s
binary_sensor:
- platform: LD2412
has_target:
name: Presence
has_moving_target:
name: Moving Target
has_still_target:
name: Still Target
sensor:
- platform: LD2412
moving_distance:
name : Moving Distance
still_distance:
name: Still Distance
moving_energy:
name: Move Energy
still_energy:
name: Still Energy
detection_distance:
name: Detection Distance
light:
name: light
g0:
move_energy:
name: g00 move energy
still_energy:
name: g00 still energy
g1:
move_energy:
name: g01 move energy
still_energy:
name: g01 still energy
g2:
move_energy:
name: g02 move energy
still_energy:
name: g02 still energy
g3:
move_energy:
name: g03 move energy
still_energy:
name: g03 still energy
g4:
move_energy:
name: g04 move energy
still_energy:
name: g04 still energy
g5:
move_energy:
name: g05 move energy
still_energy:
name: g05 still energy
g6:
move_energy:
name: g06 move energy
still_energy:
name: g06 still energy
g7:
move_energy:
name: g07 move energy
still_energy:
name: g07 still energy
g8:
move_energy:
name: g08 move energy
still_energy:
name: g08 still energy
g9:
move_energy:
name: g09 move energy
still_energy:
name: g09 still energy
g10:
move_energy:
name: g10 move energy
still_energy:
name: g10 still energy
g11:
move_energy:
name: g11 move energy
still_energy:
name: g11 still energy
g12:
move_energy:
name: g12 move energy
still_energy:
name: g12 still energy
g13:
move_energy:
name: g13 move energy
still_energy:
name: g13 still energy
number:
- platform: LD2412
timeout:
name: "presence holding"
min_distance_gate:
name: "min distance gate"
max_distance_gate:
name: "max distance gate"
g0:
move_threshold:
name: g00 move threshold
still_threshold:
name: g00 still threshold
g1:
move_threshold:
name: g01 move threshold
still_threshold:
name: g01 still threshold
g2:
move_threshold:
name: g02 move threshold
still_threshold:
name: g02 still threshold
g3:
move_threshold:
name: g03 move threshold
still_threshold:
name: g03 still threshold
g4:
move_threshold:
name: g04 move threshold
still_threshold:
name: g04 still threshold
g5:
move_threshold:
name: g05 move threshold
still_threshold:
name: g05 still threshold
g6:
move_threshold:
name: g06 move threshold
still_threshold:
name: g06 still threshold
g7:
move_threshold:
name: g07 move threshold
still_threshold:
name: g07 still threshold
g8:
move_threshold:
name: g08 move threshold
still_threshold:
name: g08 still threshold
g9:
move_threshold:
name: g09 move threshold
still_threshold:
name: g09 still threshold
g10:
move_threshold:
name: g10 move threshold
still_threshold:
name: g10 still threshold
g11:
move_threshold:
name: g11 move threshold
still_threshold:
name: g11 still threshold
g12:
move_threshold:
name: g12 move threshold
still_threshold:
name: g12 still threshold
g13:
move_threshold:
name: g13 move threshold
still_threshold:
name: g13 still threshold
select:
- platform: LD2412
out_pin_level:
name: 'Hardware output pin level'
distance_resolution:
name: 'Distance resolution'
baud_rate:
name: "baud rate"
on_value:
- delay: 3s
- lambda: |-
id(uart_bus).flush();
uint32_t new_baud_rate = stoi(x);
ESP_LOGD("change_baud_rate", "Changing baud rate from %i to %i",id(uart_bus).get_baud_rate(), new_baud_rate);
if (id(uart_bus).get_baud_rate() != new_baud_rate) {
id(uart_bus).set_baud_rate(new_baud_rate);
id(uart_bus).load_settings();
}
mode:
name: "Mode"
button:
- platform: LD2412
factory_reset:
name: "factory reset"
restart:
name: "restart"
query_params:
name: query params
text_sensor:
- platform: LD2412
version:
name: "firmware version"
mac_address:
name: "mac address"
switch:
- platform: LD2412
bluetooth:
name: "Bluetooth"