UPDATED POST-INSTALLATION TO OPENCORE 0.6.4
I am just a tech enthusiast and explorer. I do not take responsibility for any damage made to your laptop.
Azurewave AW-CE123H (equivalent to dw1550)
Note: My original WiFi card was dw1601, which was not supported. If you have another WLAN card and no knowledge about Hackintosh-ing, don't update unless you are ready to use only LAN connection. See list of supported WiFi cards.
If you have Mojave and want to update to Big Sur first update your system to Catalina and then proceed
Before updating any kext, create a pendrive copy of the actual EFI so if something doesn't work, you can restore it. Backups always help.
SD Card Reader
Note: The above is what I've tested. There may be things you're looking for which might not be listed. In that case, drop an Issue and get me to test it for you.
Star this repo if it helps you out. Feel free to drop PRs or Issues if you'd like to know anything.
OpenCore - post-installation: 0.6.1
What you need:
What works:
Expect to work:
Not working:
BIOS settings:
To start, set BIOS to Windows 8 defaults.
Then insure:
For the UHD model, the DVMT-prealloc BIOS setting must be changed to 128MB. One of two methods can be used:
Install MacOS with pre-installation EFI
copy EFI post-installation folder on EFI partition of your HD.
Modify SMBIOS data with your information for imessage/facetime
(You have to import from your older configuration or generate a new one)
- Use MacSerial to generate your SMBIOS --[Macserial](https://github.com/acidanthera/OpenCorePkg/tree/master/Utilities/macserial)
- MacSerial Example in terminal macserial -a | grep -i iMac19,1
Output Example from above command:
Generic:
SpoofVendor: YES (This prevents issues with having “Apple,inc” as manufacturer).
SystemUUID: Can be generated with MacSerial or use previous from Clover’s config.plist.
MLB: Can be generated with MacSerial or use previous from Clover’s config.plist.
ROM: <> (6 character MAC address, can be entirely random but should be unique).
SystemProductName: Can be generated with MacSerial or use previous from Clover’s config.plist.
SystemSerialNumber: Can be generated with MacSerial or use previous from Clover’s config.plist.
Data that you have to modify on Config.plist/Platforminfo/Generic with PlistEditorPro or other plist editor.
Post installation commands to do
Credits:
*Rehabman tonymacx86 forum
*Xsiry Github xsiry
*acidadanthera Github Acidanthera
*macos86.it Forum