search

Saiyato / volumio-audiophonicsonoff-plugin

MIT License
3 stars 0 forks source link

readme

volumio-audiophonicsonoff-plugin

Volumio plugin to configure the power button (with backlight) behavior connected to an Audiophonics Sabre soundcard

Information from Jedail is used, because I wanted to use pydPiper for the LCD I stripped the LCD code. Source: https://github.com/JedS/Raspdac

You can configure three GPIO pins:

  1. The GPIO pin which is set to HIGH when Volumio receives a shutdown command
  2. The GPIO pin which is set to HIGH when the power button is pressed
  3. The GPIO pin which is set to HIGH after booting successfully (i.e. Volumio and this plugin have started)

Configuration

Alt text

Software shutdown: sends a high signal to this pin when a shutdown/restart is triggered from within Volumio Shutdown button: when this pin detects a high signal, a shutdown sent to Volumio (software) Successful boot: this is the BootOK trigger, when this plugin is started by Volumio, a high signal is sent to this pin

pydPiper

The pydPiper plugin can be found here: https://github.com/Saiyato/volumio-pydpiper-plugin