Tomlet

A TOML library for .NET

I have a discord server for support

Tomlet is a zero-dependency library for the TOML configuration file format.

The entire TOML 1.0.0 specification is implemented.

Tomlet does not preserve layout, ordering, or whitespace around entries in a document. When serialized, documents are ordered in such a way as to maximise human readability and predictability. This means:

• Within a table (including the top-level document), simple key-value pairs (including inline arrays and inline tables) are first, followed by sub-tables, followed by table-arrays.
• Floating-point values are always serialized with a decimal part, even if that decimal part is zero. This is in the hope that any future parser therefore correctly identifies the value as a decimal.
• Comments are sorted into "preceding" and "inline" and assigned to a specific value, or marked as trailing on the document. Preceding comments will be on the line(s) immediately prior to the value, with no blank line separating them, and inline comments follow the value after a single space. Trailing comments are put at the end of the document and are separated from the last key by one blank line.
• Tables are serialized inline if, and only if, they are not marked as forced no-inline (via an attribute or property, see below for details), they contain fewer than four entries, all of their entries can also be serialized inline (nested inline tables are not permitted), and none of their entries contain comments.
• Arrays are serialized all on one line if they are made up purely of primitives with no comments, over multiple lines if they contain any inline tables, arrays, or comments on individual entries, and as table-arrays if they contain only tables and one or more table cannot be serialized inline using the above rules. If an array contains mixed primitive values and tables that cannot be serialized inline, an exception is thrown when serializing the array.

A word on dotted keys

The TOML specification allows for dotted keys (e.g. a.b.c = "d", which creates a table a, containing a table b, containing the key c with the string value d), as well as quoted dotted keys (e.g. a."b.c" = "d", which creates a table a, containing the key b.c, with the string value d).

Tomlet correctly handles both of these cases, but there is room for ambiguity in calls to TomlTable#GetValue and its sibling methods.

For ease of internal use, GetValue and ContainsKey will interpret keys as-above, with key names containing dots requiring the key name to be quoted. So a call to ContainsKey("a.b") will look for a table a containing a key b. Note that, if you mistakenly do this, and there is a value mapped to the key a which is NOT a table, a TomlContainsDottedKeyNonTableException will be thrown.

However, for a more convenient API, calls to specific typed variants of GetValue (GetString, GetInteger, GetDouble, etc.) will assume keys are supposed to be quoted. That is, a call to GetString("a.b") will look for a single key a.b, not a table a containing key b.

Usage

Serialize a runtime object to TOML

var myClass = new MyClass("hello world", 1, 3);
TomlDocument tomlDoc = TomletMain.DocumentFrom(myClass); //TOML document representation. Can be serialized using the SerializedValue property.
string tomlString = TomletMain.TomlStringFrom(myClass); //Formatted TOML string. Equivalent to TomletMain.DocumentFrom(myClass).SerializedValue

Deserialize TOML to a runtime object

string myString = GetTomlStringSomehow(); //Web request, read file, etc.
var myClass = TomletMain.To<MyClass>(myString); //Requires a public, zero-argument constructor on MyClass.
Console.WriteLine(myClass.configurationFileVersion); //Or whatever properties you define.

Disable table inlining

By default, Tomlet tries to inline simple tables to reduce the document size. If you don't want this behavior, either set TomlTable#ForceNoInline (if manually building a Toml doc), or use the TomlDoNotInlineObjectAttribute on a class to force all instances of that class to be serialized as a full table.

Change what name Tomlet uses to de/serialize a field

Given that you had the above setup and were serializing a class using TomletMain.TomlStringFrom(myClass), you could override TOML key names like so:

class MyClass {
    [TomlProperty("name")] //Tell Tomlet to use "name" as the key, instead of "Username", when serializing and deserializing this type.
    public string Username { get; set; }
    [TomlProperty("password")] //Tell tomlet to use the lowercase "password" rather than "Password"
    public string Password { get; set; }
}

Comments

Comments are parsed and stored alongside their corresponding values, where possible. Every instance of TomlValue has a Comments property, which contains both the "inline" and "preceding" comments. Preceding comments are the comments that appear before the value (and therefore can span multiple lines), and inline comments are the comments that appear on the same line as the value (and thus must be a single line).

Any preceding comment which is not associated with a value (i.e. it is placed after the last value) will be stored in the TrailingComment property of the TOML document itself, and will be re-serialized from there.

If you're using Tomlet's reflective serialization feature (i.e. TomletMain.____From), you can use the TomlInlineComment and TomlPrecedingComment attributes on fields or properties to specify the respective comments.

Parse a TOML File

TomlParser.ParseFile is a utility method to parse an on-disk toml file. This just uses File.ReadAllText, so I/O errors will be thrown up to your calling code.

TomlDocument document = TomlParser.ParseFile(@"C:\MyFile.toml");

//You can then convert this document to a runtime object, if you so desire.
var myClass = TomletMain.To<MyClass>(document);

Parse Arbitrary TOML input

Useful for parsing e.g. the response of a web request.

TomlParser parser = new TomlParser();
TomlDocument document = parser.Parse(myTomlString);

Creating your own mappers.

By default, serialization and deserialization are reflection-based. Both fields and properties are supported, and properties can be remapped (i.e. told not to use their name, but an alternative key) by using the TomlProperty attribute. Any fields or properties marked with attributes [TomlNonSerialized] or [NonSerialized] are skipped over(ignored), both when serializing and deserializing. Deserializing requires a parameterless constructor to instantiate the object.

This approach should work for most model classes, but should something more complex be used, such as storing a colour as an integer/hex string, or if you have a more compact/proprietary method of serializing your classes, then you can override this default using code such as this:

// Example: UnityEngine.Color stored as an integer in TOML. There is no differentiation between 32-bit and 64-bit integers, so we use TomlLong.
TomletMain.RegisterMapper<Color>(
        //Serializer (toml value from class). Return null if you don't want to serialize this value.
        color => new TomlLong(color.a << 24 | color.r << 16 | color.g << 8 | color.b),
        //Deserializler (class from toml value)
        tomlValue => {
            if(!(tomlValue is TomlLong tomlLong)) 
                throw new TomlTypeMismatchException(typeof(TomlLong), tomlValue.GetType(), typeof(Color))); //Expected type, actual type, context (type being deserialized)

            int a = tomlLong.Value >> 24 & 0xFF;
            int r = tomlLong.Value >> 16 & 0xFF;
            int g = tomlLong.Value >> 8 & 0xFF;
            int b = tomlLong.Value & 0xFF;

            return new Color(r, g, b, a); 
        }
);

Calls to TomletMain.RegisterMapper can specify either the serializer or deserializer as null, in which case the default handler (usually reflection-based, unless you're overriding the behavior for primitive values, IEnumerables, or arrays) will be used.

Manually retrieving data from a TomlDocument

TomlDocument document; // See above for how to obtain one.
int someInt = document.GetInteger("myInt");
string someString = document.GetString("myString");

// TomlArray implements IEnumerable<TomlValue>, so you can iterate over it or use LINQ.
foreach(var value in document.GetArray("myArray")) {
    Console.WriteLine(value.StringValue);
}

//It also has an index operator, so you can do this
Console.WriteLine(document.GetArray("myArray")[0]);

List<string> strings = document.GetArray("stringArray").Select(v => (TomlString) v).ToList();

//Retrieving sub-tables. TomlDocument is just a special TomlTable, so you can 
//call GetSubTable on the resulting TomlTable too.
string subTableString = document.GetSubTable("myTable").GetString("aString");

//Date-Time objects. There's no API for these (yet)
var dateValue = document.GetValue("myDateTime");
if(dateValue is TomlOffsetDateTime tomlODT) {
    DateTimeOffset date = tomlODT.Value;
    Console.WriteLine(date); //27/05/1979 00:32:00 -07:00
} else if(dateValue is TomlLocalDateTime tomlLDT) {
    DateTime date = tomlLDT.Value;
    Console.WriteLine(date.ToUniversalTime()); //27/05/1979 07:32:00
} else if(dateValue is TomlLocalDate tomlLD) {
    DateTime date = tomlLD.Value;
    Console.WriteLine(date.ToUniversalTime()); //27/05/1979 00:00:00
} else if(dateValue is TomlLocalTime tomlLT) {
    TimeSpan time = tomlLT.Value;
    Console.WriteLine(time); //07:32:00.9999990
} 

Handling Errors

Both ParseFile and Parse can throw multiple exceptions (currently around 40), but they are all an instance of TomlException.

Most of these are specific to various errors as specified in the specification, but there is also TomlInternalException which is thrown if there is an exception in Tomlet itself. If it is thrown, it will have the unhandled exception as a cause, and the exception message will state the line number which caused the exception. I'd appreciate it if you could report these to me.

The full list of exceptions follows, in alphabetical order: