Open CCF100 opened 6 years ago
Courtesy please! So hum... Hello The only thing that you need to do, is to make a common ground (link the ground of the fdd to the Arduino)
hopefully this pic helps https://imgur.com/gallery/Vfihi
if you split open the connector on a floppy cable, you can jam your wires in the pins, and glue the connector back together, it works nicely on my setup, and saves soldering anything onto your drives, so they can be easily swapped
hopefully this pic helps https://imgur.com/gallery/Vfihi
if you split open the connector on a floppy cable, you can jam your wires in the pins, and glue the connector back together, it works nicely on my setup, and saves soldering anything onto your drives, so they can be easily swapped
This was so helpful, thanks!
Didn't say in video: ground pins are shorted together. https://youtu.be/erjAiT7MRSE