ServoTeam gentlenav issues

ServoTeam / gentlenav

Automatically exported from code.google.com/p/gentlenav

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

telemetry.c in trunk does not compile because it still contains "turns" variables

#92 GoogleCodeExporter opened 9 years ago
1
Frsky CPPM 18ms support (solution included)

#91 GoogleCodeExporter opened 9 years ago
0
Airspeed from pitot - in trunk?

#90 GoogleCodeExporter opened 9 years ago
0
LOGO REL_ANGLE_TO_HOME and REL_ANGLE_TO_GOAL need inverting, get_angle_to_point() needs 180 deg added

#89 GoogleCodeExporter opened 9 years ago
1
Non expected defaultInterrupt occurence at startup

#88 GoogleCodeExporter opened 9 years ago
0
Patch for /trunk/MatrixPilot/flightplan-logo.c

#87 GoogleCodeExporter closed 9 years ago
3
OSD tweaks

#86 GoogleCodeExporter opened 9 years ago
0
Boot sequence to support early storage reading

#85 GoogleCodeExporter opened 9 years ago
0
NASA Port: IP stack

#84 GoogleCodeExporter opened 9 years ago
1
NASA Port: eLogo

#83 GoogleCodeExporter opened 9 years ago
0
NASA Port: cam tracking to use non-relative GPS

#82 GoogleCodeExporter opened 9 years ago
0
NASA Port: launcher

#81 GoogleCodeExporter opened 9 years ago
0
NASA Port: virtual GPS

#80 GoogleCodeExporter opened 9 years ago
1
NASA Port: airspeed sensor - pitot tube

#79 GoogleCodeExporter opened 9 years ago
0
Datalogging support

#78 GoogleCodeExporter opened 9 years ago
2
Geofencing

#77 GoogleCodeExporter opened 9 years ago
1
Prevent flyaways caused by temporary loss of radio

#76 GoogleCodeExporter opened 9 years ago
3
Multicopter support

#75 GoogleCodeExporter opened 9 years ago
0
Trunk default autopilot action is not RTL

#74 GoogleCodeExporter closed 9 years ago
3
Remove code optimisations specific to UDB3-

#73 GoogleCodeExporter opened 9 years ago
4
PWM channel 1 broken in trunk

#72 GoogleCodeExporter closed 9 years ago
1
Move navigation and other non control features out of axis control modules

#71 GoogleCodeExporter opened 9 years ago
1
Default options broken in trunk

#70 GoogleCodeExporter closed 9 years ago
3
Fixed climb/descent rate flight

#69 GoogleCodeExporter opened 9 years ago
3
Fix the loiter death spiral

#68 GoogleCodeExporter closed 9 years ago
4
Hardware Abstraction Layer

#67 GoogleCodeExporter opened 9 years ago
0
UDB5 gyro gains

#66 GoogleCodeExporter closed 9 years ago
5
RTOS

#65 GoogleCodeExporter opened 9 years ago
3
Easier capability to add new flight modes

#64 GoogleCodeExporter opened 9 years ago
2
Increased processor speed

#63 GoogleCodeExporter opened 9 years ago
3
High frame rate servo outputs

#62 GoogleCodeExporter opened 9 years ago
1
Grounded / safe mode

#61 GoogleCodeExporter opened 9 years ago
1
CLI configuration

#60 GoogleCodeExporter opened 9 years ago
1
Remove support for MPLAB8

#59 GoogleCodeExporter opened 9 years ago
1
Fix Trunk

#58 GoogleCodeExporter closed 9 years ago
7
Fly by wire support

#57 GoogleCodeExporter opened 9 years ago
1
Possible restructure of MatrixPilot Library

#56 GoogleCodeExporter opened 9 years ago
5
LOGO update

#55 GoogleCodeExporter opened 9 years ago
3
FAT storage for UDB4/5

#54 GoogleCodeExporter opened 9 years ago
2
Using the MatrixPilotQuad_MarkWhitehorn

#53 GoogleCodeExporter closed 9 years ago
1
No idea what pin is pin one on the UDB4 - PIC UAV Development Board

#52 GoogleCodeExporter opened 9 years ago
3
Negative CRS values in Ardustation output

#51 GoogleCodeExporter opened 9 years ago
1
Telemetry Data

#50 GoogleCodeExporter closed 9 years ago
1
r824 has compilation error

#49 GoogleCodeExporter closed 9 years ago
1
Flaps and Flaperons

#48 GoogleCodeExporter opened 9 years ago
2
Merge MavLink branch back into trunk

#47 GoogleCodeExporter closed 9 years ago
5
Update Copyright to include 2011

#46 GoogleCodeExporter closed 9 years ago
1
Update Docs for 3.1

#45 GoogleCodeExporter opened 9 years ago
4
Improve comments around board definition line in options.h

#44 GoogleCodeExporter closed 9 years ago
1
If my transmitter has no 3-way switch

#43 GoogleCodeExporter closed 9 years ago
2