search

ShellRechargeSolutionsEU / docile-charge-point

Scriptable OCPP charge point simulator and test tool
GNU General Public License v3.0
82 stars 32 forks source link
charging-station dsl emobility ocpp scala testing

readme

docile-charge-point Codacy Badge

Logo

A scriptable OCPP charge point simulator. Supports OCPP 1.5, 1.6 and 2.0 using JSON over WebSocket as the transport.

Not as continuously ill-tempered as abusive-charge-point, but it can be mean if you script it to be.

The aims for this thing:

Scripts are expressed as Scala files, in which you can use predefined functions to send OCPP messages, make expectations about incoming messages or declare the test case failed. And next to that, all of Scala is at your disposal! Examples of behavior scripts it can run already are a simple heartbeat script (OCPP 1.x / OCPP 2.0) and a full simulation of a charge session (OCPP 1.x / OCPP 2.0). The full set of OCPP and testing specific functions can be found in CoreOps, expectations.Ops and shortsend.Ops (OCPP 1.x / OCPP 2.0). For OCPP 2.0, there is also a special set of operations to deal with the complicated stateful transaction management.

There are by now four ways to run the simulator:

Running on the command line

The simplest way to run docile-charge-point is on the command line so we will discuss that first.

To run the simulator, you first have to compile it with this command:

sbt assembly

When that completes successfully, you can run the simulator like this, from the root directory of the project:

java -jar cmd/target/scala-2.12/docile.jar -c <charge point ID> -v <OCPP version> <Central System endpoint URL> <test scripts...>

so e.g.:

java -jar cmd/target/scala-2.12/docile.jar -c chargepoint0123 -v 1.6 ws://example.org/ocpp-j-endpoint examples/ocpp1x/heartbeat.scala

See java -jar cmd/target/scala-2.12/docile.jar --help for more options.

If you're looking for a Central System to run docile-charge-point against, check SteVe or OCPP 1.6 Backend.

Script structure

The charge point scripts that you specify on the command line are ordinary Scala files, that will be loaded and executed at runtime by docile-charge-point. To write these files, besides the normal standard Scala library, you can use a DSL in which you can send OCPP messages and expect a certain behavior in return from the Central System.

Simple one-line scripts

As a very simple example of the DSL, consider this script:

heartbeat()

Simple as it looks, this script already does two things:

In fact, there are such functions doing these two things for every request in OCPP 1.6 that a Charge Point can send to a Central System. There is a statusNotification that will, indeed, send a StatusNotification request.

Where these requests contain fields with data, these data can be given by supplying values for certain named arguments of those functions. By default, statusNotification() will mark the charge point as Available. To make it seem Charging instead, do this:

statusNotification(status = ChargePointStatus.Occupied(Some(OccupancyKind.Charging)))

Ouch, that's quite some code to express the OCPP 1.6 charging state. Let me digress to explain it. The reason for it is that this tool uses the case class hierarchy from the NewMotion OCPP library to express OCPP messages and their constituents parts. Those case classes however are different from the data types found in the OCPP specification, to encode the information in a more type-safe manner and to provide an abstract representation that can be transmitted in either a 1.6 or a 1.5 format. Here it is the compatibility with 1.5 that means that we can't just write ChargePointStatus.Charging, because that couldn't be serialized for 1.5. ChargePointStatus.Occupied(Some(OccupancyKind.Charging)) means: Occupied for 1.5 terms, but if you want to encode it for 1.6, you can be more precise and make it Charging.

This kind of abstraction from version-specific messages can be a useful feature in some scenarios: you can now easily test that a back-office handles a certain behavior correctly both with 1.5 and 1.6.

An interactive session with tab completion (see below) can come in handy to explore the ways you can specify OCPP messages.

Stringing operations together

As an example of how you can string DSL operations together to specify a meaningful behavior, let's look at the "do a transaction" example in its full glory. There are comments explaining what happens where:

// The idTag which can be used to look up who started the transaction
// This is ordinary Scala defining a string value; no docile DSL so far.
val chargeTokenId = "01234567"

// Now let's send an authorize request to the Central System and expect a
// response. If the expected response comes, it is returned from the
// `authorize` function.
// This response objet then contains an `idTag` field with the authorization
// information from the Central System. We call that authorization info `auth`.
val auth = authorize(chargeTokenId).idTag

// We check whether the charge token we sent is authorized. This is just plain
// Scala again.
if (auth.status == AuthorizationStatus.Accepted) {

  // If it's authorized, we start a transaction. Starting a transaction in OCPP
  // means: first set the status to Preparing...
  statusNotification(status = ChargePointStatus.Occupied(Some(OccupancyKind.Preparing)))

  // ...then start a transaction. The startTransaction function again returns
  // the StartTransaction response from the Central System, from which we take
  // the transaction ID and assign it the name `transId`
  val transId = startTransaction(meterStart = 300, idTag = chargeTokenId).transactionId

  // ... and then, we notify the Central System that this charge point has
  // started charging.
  statusNotification(status = ChargePointStatus.Occupied(Some(OccupancyKind.Charging)))

  // Another DSL operation: prompt. This allows us to prompt the user for some
  // keyboard input. Here, we just want him to press ENTER when
  // docile-charge-point should stop the transaction.
  // This `prompt` function will block until the user presses ENTER.
  prompt("Press ENTER to stop charging")

  // Okay, the user has apparently pressed ENTER. Let's stop.
  // First notify that the status of our connector is going to Finishing...
  statusNotification(status = ChargePointStatus.Occupied(Some(OccupancyKind.Finishing)))

  // ...then send a StopTransaction request...
  stopTransaction(transactionId = transId, idTag = Some(chargeTokenId))

  // ...and notify that our connector is Available again
  statusNotification(status = ChargePointStatus.Available())

// Oh yeah, it's also possible that the Central System does not authorize the
// transaction
} else {
  // In that case we consider this script failed.
  fail("Not authorized")
}

The important take-aways here are:

Writing scripts with autocomplete in your favourite IDE

I admit it's quite inconvenient that in the script files you have the full power of Scala, but you don't have IDE support to help you suggest methods to call or highlight mistakes. So I've added a project in which you can edit your docile-charge-point script with IDE support.

How does that work? Well, docile-charge-point actually loads its script files by adding a bunch of imports and other boilerplate before and after the script file contents before the code is compiled. So you would have IDE support if you would be editing the file with the boilerplate in place. I don't want to make it the standard way of working to add this boilerplate in the scripts though, because that would make it harder to read the scripts for outsiders and it would lead to more version compatibility troubles between versions of docile-charge-point.

To still allow you to have your autocomplete, there is a special template project in which you can edit a script with the boilerplate included and also execute it. In that project, docile is loaded as a library so that it is possible to run the interpreter on your compiled code without running the script file loader that adds the boilerplate.

To use it, open the template project in the autocomplete-template-project directory. The project already has an sbt file setting up the library dependencies on the docile-charge-point DSL core. IntelliJ IDEA will import this project just fine. You'll then find a file TestScript.scala that contains all the boilerplate and a comment that says // INSERT SCRIPT HERE. If you start editing at the place where that comment is, you can type anything that you can also type in a script file without the boilerplate. IDEA will offer you all its suggestion magic. To run your code, just execute TestScript as a main class in IDEA. To distribute your code as a reusable docile-charge-point script, just copy the part you added out of the surrounding boilerplate and put it in a file of its own.

Scripts with expectations

The semi-final line is interesting: fail("Not authorized").

This shows that docile-charge-point scripts don't just run. They run, and in the end docile-charge-point will consider them either failed or passed. Also, if a script inadvertently fails to run at all, docile-charge-point will consider the outcome an error.

If I for instance run both the example heartbeat script and the example do-a-transaction script, against a back-office that does not authorize the transaction, I will see that one script failed and the other one passed. In the console, that looks like this:

java -jar cmd/target/scala-2.12/docile.jar -c '03000001' ws://example.com/ocpp examples/heartbeat.scala examples/do-a-transaction.scala
Loading settings from plugins.sbt ...
Loading project definition from /Users/reinier/Documents/Programs/docile-charge-point/project
Loading settings from build.sbt ...
Set current project to docile-charge-point (in build file:/Users/reinier/Documents/Programs/docile-charge-point/)
Credentials file /Users/reinier/.ivy2/.credentials does not exist
Packaging /Users/reinier/Documents/Programs/docile-charge-point/target/scala-2.11/docile-charge-point_2.11-0.1-SNAPSHOT.jar ...
Done packaging.
Running (fork) chargepoint.docile.Main -c 03000001 ws://example.com/ocpp examples/heartbeat.scala examples/do-a-transaction.scala
Going to run heartbeat
>> HeartbeatReq
<< HeartbeatRes(2018-04-02T20:38:13.342Z[UTC])
Going to run do-a-transaction
>> AuthorizeReq(01234567)
<< AuthorizeRes(IdTagInfo(IdTagInvalid,None,Some(01234567)))
heartbeat: ✅
do-a-transaction: ❌  Not authorized

So docile-charge-point will show that the heartbeat script passed, and the do-a-transaction script failed with the message "Not authorized".

Also, the command will return success (exit status 0) if all scripts passed, and failure (exit status 1) otherwise.

It is now also time to come back to the statement about statusNotification(), saying that this simple call did two things. In fact, this function will send the message, and then wait for the response, and make the script fail if the first incoming message is not a StatusNotification response. This is usually useful in order to get a response object to work with, but sometimes you'd want your script to be more flexible about how the Central System can respond.

For those cases you have the send and expectIncoming functions in the DSL. send sends a message to the Central System, and immediately returns without waiting for a response. expectIncoming in turn looks if a message has been received from the Central System, and if not, will block until one arrives.

The statusNotification() call turns out to be equivalent to:

send(StatusNotificationReq(
  scope = ConnectorScope(0),
  status = ChargePointStatus.Available(),
  timestamp = Some(ZonedDateTime.now()),
  vendorId = None
))
expectIncoming(matching { case res@StatusNotificationRes => res })

So this expectIncoming(matching ...) line is in the end also an expression that returns the response that was just received.

What expectIncoming does comes down to:

In order to feed expectIncoming, docile-charge-point keeps a queue of messages that have been received. The expectIncoming call is always evaluated against the head of the queue. So you have to expect every message the Central System sends to you, in the order in which they arrive!

To make this order requirement easier to deal with, you can also expect multiple messages at once, and docile-charge-point will accept them no matter in which order they arrive:

expectInAnyOrder(
  remoteStartTransactionReq.respondingWith(RemoteStartTransactionRes(true)),
  changeConfigurationReq.respondingWith(ChangeConfigurationRes(ConfigurationStatus.Accepted))
)

As a variant of the expectIncoming(matching ...) idiom, there is also an expectIncoming requestMatching ... variant, that lets you expect incoming requests from the Central System, and respond to them, like so:

      expectIncoming(
        requestMatching({case r: RemoteStopTransactionReq => r.transactionId == transId})
          .respondingWith(RemoteStopTransactionRes(_))
      )

This bit waits for an incoming StopTransaction request, and fails if the next incoming message is not a StopTransaction request. If it is, it returns whether the transaction ID in that message matches the transId value. Also, it responds to the Central System with a RemoteStopTransaction response.

The argument to respondingWith can either be a literal value, or it can be a function from the result of the partial function to a response. Here the latter option is used in order to tell the Central System whether the remote stop request is accepted, based on whether the remote stop request's transaction ID matched the one that the script had started.

See the remote start/stop example for OCPP 1.x or for OCPP 2.0 for the full script using all these features.

As you can see in the handling of the remote start request there, there is also a shorthand for expecting an incoming request of a certain type, without caring more about the specific message contents. So this bit:

expectIncoming(remoteStartTransactionReq.respondingWith(RemoteStartTransactionRes(true)))

is equivalent to:

expectIncoming(
  requestMatching({case r: StartTransactionReq => r})
    .respondingWith(RemoteStartTransactionRes(true))
)

Running on the command line with an interactive prompt

You can also go into an interactive testing session on the command line. To do that, pass the -i command line flag:

java -jar cmd/target/scala-2.12/docile.jar -i -v 1.6 -c chargepoint0123 ws://example.com/ocpp

The -i option here tells docile-charge-point to go into interactive mode.

The app will start and something write this to the console:

[info, chargepoint.docile.test.InteractiveRunner] Going to run Interactive test
Compiling (synthetic)/ammonite/predef/interpBridge.sc
Compiling (synthetic)/ammonite/predef/replBridge.sc
Compiling (synthetic)/ammonite/predef/DefaultPredef.sc
Compiling (synthetic)/ammonite/predef/ArgsPredef.sc
Compiling (synthetic)/ammonite/predef/CodePredef.sc
Welcome to the Ammonite Repl 1.0.3
(Scala 2.11.11 Java 1.8.0_144)
If you like Ammonite, please support our development at www.patreon.com/lihaoyi
@

The @ sign on that last line is your prompt. You can now type expressions in the docile-charge-point DSL, like:

statusNotification()

and you'll see the docile-charge-point and the back-office exchange messages:

[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] >> StatusNotificationReq(ConnectorScope(0),Occupied(Some(Charging),None),Some(2018-01-01T15:12:43.251+01:00[Europe/Paris]),None)
[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] << StatusNotificationRes

let's see what happens if we send a timestamp from before the epoch...

statusNotification(timestamp = Some(ZonedDateTime.of(1959, 1, 1, 12, 0, 0, 0, ZoneId.of("Z"))))

turns out it works surprisingly well :-):

[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] >> StatusNotificationReq(ConnectorScope(0),Available(None),Some(1959-01-01T12:00Z),None)
[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] << StatusNotificationRes

You'll also see that the interactive mode prints something like this:

res0: StatusNotificationRes.type = StatusNotificationRes

That's the return value of the expression you entered, which in this case, is the StatusNotification response object. And because you're in a full-fledged Scala REPL using Ammonite, nothing is stopping you from doing fancy stuff with that. So you can for instance values from responses in subsequent requests:

@ startTransaction(idTag = "ABCDEF01")
[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] >> StartTransactionReq(ConnectorScope(0),ABCDEF01,2018-01-01T15:22:30.122+01:00[Europe/Paris],0,None)
[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] << StartTransactionRes(177,IdTagInfo(Accepted,None,Some(ABCDEF01)))
res3: StartTransactionRes = StartTransactionRes(177, IdTagInfo(Accepted, None, Some("ABCDEF01")))

@ stopTransaction(transactionId = res3.tr
transactionId
@ stopTransaction(transactionId = res3.transactionId)
[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] >> StopTransactionReq(177,Some(ABCDEF01),2018-01-01T15:22:50.457+01:00[Europe/Paris],16000,Local,List())
[info, chargepoint.docile.test.InteractiveOcppTest$$anon$1] << StopTransactionRes(Some(IdTagInfo(Accepted,None,Some(ABCDEF01))))
res4: StopTransactionRes = StopTransactionRes(Some(IdTagInfo(Accepted, None, Some("ABCDEF01"))))

Note also that between those two requests, I used tab completion to look up the name of the transactionId field in the StopTransaction request.

Running in a Docker container

There is now a Dockerfile included, so you can run it in Docker if you want. Also you can use the Docker image as a basis for your own images that encode certain charge point behaviors.

To run it in Docker, do:

$ sbt assembly

$ docker build -t docile-charge-point:latest .

$ docker run --rm -it docile-charge-point:latest

The Docker container will execute docile-charge-point, executing a script that waits for OCPP remote start and remote stop requests and reports charge transactions accordingly.

See the Dockerfile for available environment variables to control the image.

Running inside another app, embedded as a library

For maximum flexibility, you can embed docile-charge-point as a library dependency in your own Scala code. In that case, you can use the docile-charge-point DSL while also calling other libraries and code of your own.

To make docile-charge-point a dependency of your Scala project, add this to your library dependencies in your build.sbt:

"com.newmotion" %% "docile-charge-point" % "0.5.1"

Then, in your code:

  1. Create tests as instances of chargepoint.docile.dsl.OcppTest in your code
  2. Combine them with a testcase name to be a chargepoint.docile.test.TestCase
  3. Instantiate a chargepoint.docile.test.Runner wrapping the test cases
  4. Call the .run() method on the Runner, passing a chargepoint.docile.test.RunnerConfig to specify how you'd like the test to be executed

Loading test cases distributed separately as files

To load text files as test cases, you need another library as a dependency:

"com.newmotion" %% "docile-charge-point-loader" % "0.5.1"

Then you'll, besides all the classes for defining and running test cases mentioned above, also have a chargepoint.docile.test.Loader that has a few methods all called runnerFor that will give you a Runner instance based on a file, String or Array[Byte] for a test case.

One example where this is done is the AWS Lambda and S3 integration in the lambda subproject in this repository. Run sbt lambda/run to compile and run that code.

At the moment, unfortunately, the only documentation is this and the source code.

Also, at the moment the library is only published for Scala 2.11 and 2.12. The reason is that docile-charge-point depends on Ammonite and Ammonite is a very finicky thing when it comes to dependency versioning. We are aware and if we keep working on docile-charge-point we will split the library and the interactive executable, so that we can also build the library for Scala 2.13 and later versions.

TODOs

It's far from finished now. The next steps I plan to develop:

Other ideas

Legal

The contents of this repository are © 2017-2019 The New Motion B.V. and other contributors, licensed under the terms of the GNU General Public License version 3.