Pre-built Zigbee firmware images as binary files for Silicon Labs EFR32 SoC family,
Firmware is built with Simplicity Studio Version: SV4.1.13.5 with EmberZNet SDK 6.7.4.0
E180-NCP are Zigbee coordinator firmware images with EmberZNet PRO Zigbee stack for the E180-ZG120A/E180-ZG120B module and E180-ZG120B-TB evualuation board from Ebyte (or any other modules using EFR32MG1B232F256GM48).
E180-ZG120A/E180-ZG120B contains IC = EFR32MG1B232F256GM48 which has a EFR32MG12 MCU that is part of Silabs EFR32MG1 Wireless Gecko Series 1 of SoCs.
Note! Backup your original Firmware before flash! E180-NCP firmware is UNTESTED. Pin definition: UART0 TX:PA0, RX:PA1, LED1:PF7
E180-ZG120A module links:
E180-ZG120B module links:
E180-ZG120B-TB evaluation board links:
These contain a EFR32MG1 SoCs (Series 1) specifically the IC = EFR32MG1B232F256GM48
由于E180系列模块不包含能通过串口更新程序的BootLoader(就目前了解来说)推荐使用JLink进行程序更新,此外使用JFlash还可备份模块当前的程序,方便在必要时刷回。仅需备份0x0-0x3FFF程序,共256KB。同理,刷写程序时也仅需刷写Flashbank0,即0x0-0x3FFF。