SmartSpin2kFlasher is a utility app for the SmartSpin2k framework and is designed to make flashing ESPs with SmartSpin2K as simple as possible by:
This project was originally intended to be a simple command-line tool, but then I decided that a GUI would be nice. As I don't like writing graphical front end code, the GUI largely is based on the ESPHome-Flasher project.
The flashing process is done using the esptool library by espressif.
It doesn't have to be installed, just double-click it and it'll start. Check the releases section for downloads for your platform.
pip
If you want to install this application from pip
:
pip3 install wxpython
(see also linux notes below)pip3 install smartspin2kflasher
smartspin2kflasher
. Alternatively, you can use the command line interface (
type smartspin2kflasher -h
for info)If you want to build this application yourself you need to:
pip3 install wxpython
pip3 install -e .
in the project's root.smartspin2kflasher
. Alternatively, you can use the command line interface (
type smartspin2kflasher -h
for info)Installing wxpython for linux can be a bit challenging (especially when you don't want to install from source). You can use the following command to install a wxpython suitable with your OS:
# Go to https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ and select the correct OS type
# here, we assume ubuntu 18.03 bionic
pip3 install -U \
-f https://extras.wxpython.org/wxPython4/extras/linux/gtk3/ubuntu-18.04 \
wxPython
MIT © Anthony Doud, Joel Baranick MIT © Marcel Stör, Otto Winter