Staphen ardupilot-mega issues

Staphen / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Verify sketch ArduCopter.pde in Arduino 1.0 fails with AP_Int16

#706 GoogleCodeExporter closed 8 years ago
7
Arducopter not compile: g.rc_9, g.rc_10, g.rc_11 does not exist.

#705 GoogleCodeExporter opened 8 years ago
1
New parameter: GPS satellites required for setting home

#704 GoogleCodeExporter opened 8 years ago
5
arduino 0023 compiler error on arducopter 2.7 and 2.7.1

#703 GoogleCodeExporter closed 8 years ago
3
Enhancement request

#702 GoogleCodeExporter closed 8 years ago
11
Small MP bug in Camera set-up

#701 GoogleCodeExporter closed 8 years ago
2
When GPS_PROTOCOL defined to MTK16 instead of AUTO APM must be reset otherwise doesn't get lock and wont communicate with GPS

#700 GoogleCodeExporter closed 8 years ago
1
pb to start APM...

#699 GoogleCodeExporter opened 8 years ago
5
90 degrees heading error

#698 GoogleCodeExporter closed 8 years ago
3
for new 3DR Ublox-LEA6 the GPS driver does not seem to update 3D fix field

#697 GoogleCodeExporter opened 8 years ago
3
APM config issues

#696 GoogleCodeExporter closed 8 years ago
1
Mission Planner Help Links don't connect

#695 GoogleCodeExporter closed 8 years ago
3
Some Geofence Tab text in black instead of white - MP1.1.99

#694 GoogleCodeExporter closed 8 years ago
3
APM Controls Throttle in FBW_A

#693 GoogleCodeExporter closed 8 years ago
6
CH6 tuning - visual output of values

#692 GoogleCodeExporter opened 8 years ago
0
CH6 tuning shows only Min or Max, nothing in between.

#691 GoogleCodeExporter closed 8 years ago
5
MissionPlanner: Small column header bug in Flight Planner screen's WayPoints section

#690 GoogleCodeExporter closed 8 years ago
1
adding rfcomm Devices to the list of Portnames in ArdupilotMegaPlanner

#689 GoogleCodeExporter closed 8 years ago
2
ArdupilotMegaPlanner10.exe on Mono, always finding update, fails to restart after update.

#688 GoogleCodeExporter closed 8 years ago
4
Enhancement request (Arduplane & APM Planner): native RSSI & Battery_Voltage_B readings.

#687 GoogleCodeExporter closed 8 years ago
7
Servo limits (maximum throw) is not working in stabilize, fbw and other modes.

#686 GoogleCodeExporter opened 8 years ago
2
MAVLink 1.0 send_heartbeat() system_status should match extended status

#685 GoogleCodeExporter closed 8 years ago
5
ppm encoder does not read the radio input from the receiver quite well

#684 GoogleCodeExporter opened 8 years ago
2
APM Planner (Antenna Tracking)

#683 GoogleCodeExporter closed 8 years ago
6
coding issue in arduplane

#682 GoogleCodeExporter closed 8 years ago
3
U-blox NMEA GGA parcing problem

#681 GoogleCodeExporter opened 8 years ago
0
FBW_B elevator is reversed

#680 GoogleCodeExporter closed 8 years ago
6
can not use the latest mission planner to download mega for APM1

#679 GoogleCodeExporter closed 8 years ago
3
Mission Planner installed incompatible firmware

#678 GoogleCodeExporter closed 8 years ago
2
Does not switch mode when receiver goes to failsafe

#677 GoogleCodeExporter opened 8 years ago
2
Timeout by Update at start 1.1.92/1.1.94

#676 GoogleCodeExporter closed 8 years ago
7
NOT COM PORT AND NOT USB RECOGNIZED

#675 GoogleCodeExporter opened 8 years ago
2
Pull request: Use Arduino tools (avr-gcc, avr-g++, avr-gdb, etc.) on Linux like on OS X and Windows

#674 GoogleCodeExporter opened 8 years ago
2
Can't get to command line mode via 3dr radio

#673 GoogleCodeExporter closed 8 years ago
2
Mission planner can't connect when GPS is disconnected from APM

#672 GoogleCodeExporter opened 8 years ago
1
Define Loiter Radius/Direction for each Waypoint

#671 GoogleCodeExporter opened 8 years ago
0
DoS with UART I/O

#670 GoogleCodeExporter opened 8 years ago
0
90 degree yaw turn in ACRO mode on takeoff

#669 GoogleCodeExporter opened 8 years ago
0
Mission Planner: Typo in Tool Tip Resource File

#668 GoogleCodeExporter closed 8 years ago
2
Missing ':' after Lon information on gps test

#667 GoogleCodeExporter opened 8 years ago
0
Old mission planner is running after manually checking for updates

#666 GoogleCodeExporter closed 8 years ago
3
Update Mission Planner for MavLink

#665 GoogleCodeExporter closed 8 years ago
5
Mission planner wiki page error: gives the wrong name for the mission planner download file

#664 GoogleCodeExporter closed 8 years ago
1
APM Mission Planner - Configuration --> "Arduplane Level" does not work on Arduplane 2.40

#663 GoogleCodeExporter closed 8 years ago
5
APM Mission Planner - Satcount does not work with Mavlink 1.0

#662 GoogleCodeExporter closed 8 years ago
2
Mission Planner - (re)Launch Telemetry Log Path Handling Issue

#661 GoogleCodeExporter closed 8 years ago
4
MediaTek GPS startup time very long

#660 GoogleCodeExporter opened 8 years ago
3
APM2 Serial3/UART2 not functional

#659 GoogleCodeExporter opened 8 years ago
7
Power supply for APM2 Quadcopter

#658 GoogleCodeExporter opened 8 years ago
2
joystick stuck after connection

#657 GoogleCodeExporter closed 8 years ago
2