Suxsem firmware for TS0202 ZigBee motion sensor

EXPERIMENTAL

Heavely based on https://github.com/doctor64/tuyaZigbee

• Rock solid motion detection
• Ultra low power
• 4hrs battery and status reporting
• OTA updates (check every 12hrs)

Known limitations

• DO NOT enable reporting. Device is hardcoded to report battery percentage, battery voltage and occupancy status every 4 hours. This is to optimize battery consumption and prevent additional wake-ups. (Still, this could be improved)

Instructions

1) Flash the motionSensor_TS0202_***.bin file using https://github.com/Suxsem/Telink-Zigbee-serial-flash-tool starting at address 0

2) Copy the converter.js file in you Zigbee2MQTT configuration directory. More information here: https://www.zigbee2mqtt.io/guide/configuration/more-config-options.html#external-converters

3) Enable pairing in Zigbee2MQTT and long press the button on the device for more then 5 seconds, until it starts blinking

4) Ensure initial configuration is properly completed by Zigbee2MQTT. Specifically, check that in the bind tab of Zigbee2MQTT PowerCfg and ssIasZone clusters are binded to coordinator. If not, remove and pair the device again.