Swolemak

Flash instructions (Windows)

• Download QMK-toolbox, found here.
• Download the .hex file under the Code-tab, then you find it under releases.
• Make sure that the reciever is discovered, if successful a message will appear.

  *** Unknown: Mitosis connected  -- FEED:0000:0000

• Load the .hex file that you downloaded with the "Local file"-field.
• Reset the reciever by pressing the button closest to the micro USB connector.
• Now a yellow line should be printed.

  *** Caterina device connected: Arduino Micro bootloader (COM3) -- 0000:0000:0000

• Quickly press flash, you only have a couple of seconds!
• A message like this should now appear.

  *** Attempting to flash, please don't remove device

• If successful, you will see this print out.

  avrdude.exe: verifying ...
  avrdude.exe: 22904 bytes of flash verified
  
  avrdude.exe done.  Thank you.

  You are now DONE, congratulations!