search

TheDIYGuy999 / RC_Transmitter

An Arduino 2.4GHz and IR remote controller with OLED display
https://www.youtube.com/watch?v=izWRkwGFG2E
MIT License
131 stars 37 forks source link

Trim #2

Open VinciSilver opened 6 years ago

VinciSilver commented 6 years ago

Hello, Congrats for the project and execution. I wonder if is possible to put trims in this project ( ele, ail and rudder) , fly a model is extreme dificult without them Regards Vinci

TheDIYGuy999 commented 6 years ago

Thanks. For endpoint adjustments have a look at the manual.

VinciSilver commented 6 years ago

I see, but you have to enter in menu mode and then make the adjustments, because you are in flying it is not practical neither efficient to do this. A commercial model have this trims ( each channel )which make it easy. Is it much difficult to add the trims in the project?

karambolis8 commented 3 years ago

Hello. Thanks for this great project. Is there any chance to include trims in near future. This really is very different from limits, and literally all commercial RC radios have trims. Even old analog 35MHz radios without any display had trims :)