ANT-FS Command Line Interface

This program (antfs-cli) extracts all activity FIT files from a device and writes them to a folder (see file locations below). The first time it runs it attempts to sync with the watch. This produces an authfile which is written to the same folder. On startup this program will try to read that file to avoid having to re-sync.

Requirements

• openant >= 0.4

Installation

Run sudo python setup.py install to install ANT-FS Command Line Interface. This will install an antfs-cli binary in /usr/bin or similar.

Usage

Usage: antfs-cli [options]

Options:
  -h, --help  show this help message and exit
  --upload    enable uploading
  --debug     enable debug

Upload to Garmin Connect

This program can upload automatically the activities from your watch to Garmin Connect by using garmin-uploader.

To setup the activity upload, follow these steps:

1. Install upload extra dependecies

   sudo pip install antfs-cli[upload]

2. Setup your Garmin Connect credentials in ~/.guploadrc

   [Credentials]
   username=yourgarminuser
   password=yourgarminpass

3. Copy the file scripts/40-upload_to_garmin_connect.py into the directory ~/.config/antfs-cli/scripts Make sure it is still executable.

Now after every successful activity download from your watch, the activity will be uploaded to Garmin Connect.

Upload to Strava

This program can upload automatically the activities from your watch to Strava by using stravalib and drpexe-uploader.

To setup the activity upload, follow these steps:

1. Install upload extra dependecies

   sudo pip install stravalib

2. Run the script scripts/40-upload_to_strava.py to fetch your Strava credentials. Follow the instructions to authorize drpexe-uploader to upload files on your behalf.

   ./scripts/40-upload_to_strava.py

3. Copy the file scripts/40-upload_to_strava.py into the directory ~/.config/antfs-cli/scripts Make sure it is still executable.

File locations

Simple answer (probably correct for most people)

Your files are placed in ~/.config/antfs-cli/

Long answer

FIT files and authfiles are stored in an the location specified by the XDG Base Directory specification. It uses the $XDG_CONFIG_HOME with $HOME/.config as backup. In this directory a antfs-cli folder is created in which a folder for each device is created. Both the .FIT files and authfile are stored in this device-specific folder. All logs are stored in a logs subfolder of the antfs-cli directory.

Supported devices

Any device supported by openant should work.

ANT USB Sticks

• ANTUSB2 Stick (0fcf:1008: Dynastream Innovations, Inc.)
• ANTUSB-m Stick (0fcf:1009: Dynastream Innovations, Inc.)

ANT-FS Devices

Any compliant ANT-FS device should in theory work, but those specific devices have been reported as working:

• Garmin Forerunner 60
• Garmin Forerunner 405CX
• Garmin Forerunner 310XT
• Garmin Forerunner 610
• Garmin Forerunner 910XT
• Garmin FR70
• Garmin Swim

Please let me know if you have any success with devices that are not listed here.