search

UMMS-Biocore / debrowser

Differential Count Data Analysis Toolbox
GNU General Public License v3.0
60 stars 30 forks source link

readme

DEBrowser:

Interactive Differential Expression Analysis Tool

Citation

If you are using DEBrowser in your research, please cite:

Alper Kucukural, Onur Yuksel, Deniz M. Ozata, Melissa J. Moore, Manuel Garber, DEBrowser: Interactive Differential Expression Analysis and Visualization Tool for Count Data, BMC Genomics 2019, 20:6 doi: 10.1186/s12864-018-5362-x

DOI

Introduction

Differential expression (DE) analysis has become an increasingly popular tool in determining and viewing up and/or down expressed genes between two sets of samples. The goal of differential gene expression analysis is to find genes or transcripts whose difference in expression, when accounting for the variance within condition, is higher than expected by chance. DESeq2 is an R package available via Bioconductor and is designed to normalize count data from high-throughput sequencing assays such as RNA-Seq and test for differential expression (Love et al. 2014). With multiple parameters such as padjust values, log fold changes, plot styles, and so on, altering plots created with your DE data can be a hassle as well as time consuming. The Differential Expression Browser uses DESeq2 (Love et al., 2014), EdgeR (Robinson et al., 2010), and Limma (Ritchie et al., 2015) coupled with shiny (Chang, W. et al., 2016) to produce real-time changes within your plot queries and allows for interactive browsing of your DE results. In addition to DE analysis, DEBrowser also offers a variety of other plots and analysis tools to help visualize your data even further.

DEBrowser

DEBrowser utilizes Shiny, a R based application development tool that creates a wonderful interactive user interface (UI) combined with all of the computing prowess of R. After the user has selected the data to analyze and has used the shiny UI to run DE analysis, the results are then input to DEBrowser. DEBrowser manipulates your results in a way that allows for interactive plotting by which changing padj or fold change limits also changes the displayed graph(s). For more details about these plots and tables, please visit our quick start guide for some helpful tutorials.

For comparisons against other popular data visualization tools, see the comparison table below (Figure 40).

Quick start

Before you start; you will have to install R and/or RStudio. 

# Installation instructions:
# 1. Install DEBrowser and its dependencies by running the lines below
# in R or RStudio.

if (!requireNamespace("BiocManager", quietly=TRUE))
    install.packages("BiocManager")
BiocManager::install("debrowser")

# 2. Load the library

library(debrowser)

# 3. Start DEBrowser

startDEBrowser()

Please check Operating System Dependencies section, in case your operating system requires packages to be installed.

Browsing your Data

Data via TSV file

Once you've made your way to the website, or you have a local instance of DEBrowser running, you will be greeted with data loading section:

*Figure 1. Data loading.*

To begin the analysis, you need to upload your count data file (comma or semicolon separated (CSV), and tab separated (TSV) format) to be analyzed and choose appropriate separator for the file (comma, semicolon or tab).

Gene quantifications table can be obtained running standard software like HTSeq (Anders,S. et al, 2014) or RSEM (Li and Dewey, 2011). The file values must contain the gene, transcript(s), and the sample raw count values you wish to enter into DEBrowser.

If you do not have a dataset to upload, you can use the built in demo data file by clicking on the 'Load Demo (Vernia et al.)!' button. To view the entire demo data file, you can download this demo set: https://umms.dolphinnext.com/pub/debrowser/simple_demo.tsv . For another example, try our full dataset (Vernia et. al): https://umms.dolphinnext.com/pub/debrowser/advanced_demo.tsv .

The structure of the count data files are shown below:

gene transcript exper_rep1 exper_rep2 control_rep1 control_rep2
DQ714826 uc007tfl.1 0.00 0.00 0.00 0.00
DQ551521 uc008bml.1 0.00 0.00 0.00 0.00
AK028549 uc011wpi.1 2.00 1.29 0.00 0.00

Please also note that, DEBrowser reads the gene names from the first column and skips other non numerical columns and starts reading the quantification values from the 3rd column in this case.

In addition to the count data file; you need to upload metadata file to correct for batch effects or any other normalizing conditions you might want to address that might be within your results. To handle for these conditions, simply create a metadata file by using the example table at below or download sample file from following link: https://umms.dolphinnext.com/pub/debrowser/simple_demo_meta.txt

sample batch condition
exper_rep1 1 A
exper_rep2 2 A
exper_rep3 1 A
control_rep1 2 B
control_rep2 1 B
control_rep3 2 B

Metadata file can be formatted with comma, semicolon or tab separators similar to count data files. These files used to establish different batch effects for multiple conditions. You can have as many conditions as you may require, as long as all of the samples are present.

Once the count data and metadata files have been loaded in DEBrowser, you can click upload button to visualize your data as shown at below:

*Figure 2. Upload Summary*

After loading the gene quantification file, and if specified the metadata file containing your batch correction fields, you then have the option to filter low counts and conduct batch effect correction prior to your analysis. Alternatively, you may skip these steps and directly continue with differential expression analysis or view quality control (QC) information of your dataset.

Low Count Filtering

In this section, you can simultaneously visualize the changes of your dataset while filtering out the low count genes. Choose your filtration criteria from Filtering Methods box which is located just center of the screen. Three methods are available to be used:

After selection of filtering methods and entering threshold value, you can proceed by clicking Filter button which is located just bottom part of the Filtering Methods box. On the right part of the screen, your filtered dataset will be visualized for comparison as shown at figure below.

*Figure 3. Filtering*

You can easily compare following features, before and after filtering:

*Figure 4. Show Data*

Afterwards, you may continue your analysis with Batch Effect Correction or directly jump to differential expression analysis or view quality control (QC) information of your dataset.

Batch Effect Corrections

If specified metadata file containing your batch correction fields, then you have the option to conduct batch effect correction prior to your analysis. By adjusting parameters of Options box, you can investigate your character of your dataset. These parameters of the options box are explained as following:

Upon clicking submit button, comparison tables and plots will be created on the right part of the screen as shown below.

*Figure 5. Batch Effect Correction - PCA*

*Figure 6. Batch Effect Correction - IQR*

*Figure 7. Batch Effect Correction - Density*

You can investigate the changes on the data by comparing following features:

Since we have completed batch effect correction and normalization step, we can continue with one of the following options: 'Go to DE Analysis' and, 'Go to QC plots!'. First option takes you to page where differential expression analyses are conducted with DESeq2, EdgeR or Limma. The second option, 'Go to QC plots!', takes you to a page where you can view quality control metrics of your data by PCA, All2All, Heatmap, Density, and IQR plots.

DE Analysis:

The first option, 'Go to DE Analysis', takes you to the next step where differential expression analyses are conducted.

*Figure 8. DE Selection*

If you need to remove samples from a condition, simply select the sample you wish to remove and hit the delete/backspace key. In case, you need to add a sample to a condition you can click on one of the condition text boxes to bring up a list of samples and then click on the sample you wish to add from the list and it will be added to the textbox for that comparison.

After clicking on the 'Submit!' button, DESeq2 will analyze your comparisons and store the results into separate data tables. It is important to note that the resulting data produced from DESeq is normalized. Upon finishing the DESeq analysis, a result table will appear which allows you to download the data by clicking "Download" button. To visualize the data with interactive plots please click on "Go to Main Plots!" button.

The Main Plots of DE Analysis:

Upon finishing the DESeq analysis, please click on Go to Main Plots! button which will open Main Plots tab where you will be able to view the interactive plots.

*Figure 9. Info Tabs*

The page will load with Scatter Plot. You can switch to Volcano Plot and MA Plot by using Plot Type section at the left side of the menu. Since these plots are interactive, you can click to zoom button on the top of the graph and select the area you would like to zoom in by drawing a rectangle. Please see the plots at below:

*Figure 10. Main Plots*

A. Scatter plot, B. Volcano plot, C. MA plot

*Figure 11. Background data*

You can hover over the scatterplot points to display more information about the point selected. A few bargraphs will be generated for the user to view as soon as a scatterplot point is hovered over.

*Figure 12. main plot hover*

A. Hover on Fabp3 gene, B. Read Counts vs Samples, C. Read Counts vs Conditions

You also have a wide array of options when it comes to fold change cut-off levels, padj cut-off values, which comparison set to use, and dataset of genes to analyze.

*Figure 13. main plot filters*

*Figure 14. Selected conditions*

After DE analysis, you can always download the results in CSV format by clicking the Download Data button located under the Data Options. You can also download the plot or graphs by clicking on the download button at top of each plot or graph.

Differential Expression Calculations

DESeq2

For the details please check the user guide at this location: https://www.bioconductor.org/packages/release/bioc/vignettes/DESeq2/inst/doc/DESeq2.pdf

DESeq2 performs multiple steps in order to analyze the data you’ve provided for it. The first step is to indicate the condition that each column (experiment) in the table represent. You can group multiple samples into one condition column. DESeq2 will compute the probability that a gene is differentially expressed (DE) for ALL genes in the table. It outputs both a nominal and a multiple hypothesis corrected p-adjusted (padj) value using a negative binomial distribution.

Un-normalized counts

DESeq2 requires count data as input obtained from RNA-Seq or another high-throughput sequencing experiment in the form of matrix values. Here we convert un-integer values to integer to be able to run DESeq2. The matrix values should be un-normalized, since DESeq2 model internally corrects for library size. So, transformed or normalized values such as counts scaled by library size should not be used as input. Please use edgeR or limma for normalized counts.

Used parameters for DESeq2

EdgeR

For the details please check the user guide at this location: https://www.bioconductor.org/packages/release/bioc/vignettes/edgeR/inst/doc/edgeRUsersGuide.pdf

Used parameters for EdgeR

Limma

For the details please check the user guide at this location: https://bioconductor.org/packages/release/bioc/vignettes/limma/inst/doc/usersguide.pdf

Limma is a package to analyze of microarray or RNA-Seq data. If data is normalized with spike-in or any other scaling, transformation or normalization method, Limma can be ideal. In that case, prefer limma rather than DESeq2 or EdgeR.

Used parameters for Limma

The Heatmap of DE Analysis

Once you've selected a specific region on Main Plots (Scatter, Volcano or MA plot), a new heatmap of the selected area will appear just next to your plot. If you want to hide some groups (such as Up, Down or NS based on DE analysis), just click on the group label on the top right part of the figure. In this way, you can select a specific part of the genes by lasso select or box select tools that includes only Up or Down Regulated genes. As soon as you completed your selection, heatmap will be created simultaneously.

*Figure 15. main plot selection*

A. Box Selection, B. Lasso Selection, C. Created heatmap based on selection

Used clustering and linkage methods in heatmap

Used distance methods in heatmap

Interactive Heatmap

You can also select to view an interactive version of the heatmap by clicking on the 'Interactive' checkbox on the left panel under the height and width options. Selecting this feature changes the heatmap into an interactive version with two colors, allowing you to select specific genes to be compared within the GO term plots.

Just like in the Main Plots, you can click and drag to create a selection. To select a specific portion of the heatmap, make sure to highlight the middle of the heatmap gene box in order to fully select a specific gene. This selection can be used later within the GO Term plots for specific queries on your selection.

*Figure 16. interactive heatmap*

A. Before Selection B. Selection of area with zoom tool C. Zoomed heatmap region which allows better viewing resolution.

Interactive Feature: In order to increase the performance of the generating heatmaps, interactive option is disabled by default. After deciding plotting/clustering parameters of the heatmap, you might activate this feature to investigate each block in detail.

The Scale Option of Heatmap

By using Scale Option field on the left sidebar menu, it is possible to adjust scaling parameters of DEBrowser. There are four main options:

  1. Center: If it is checked then centering is done by subtracting the column means of data from their corresponding columns. Otherwise no centering is done.(Default value:Checked)
  2. Scale: The value of scale determines how column scaling is performed (after centering). If scale is checked then scaling is done by dividing the (centered) columns of the data by their standard deviations if center is checked, and the root mean square if center is unchecked. If scale is unchecked, no scaling is done.(Default value:Checked)
  3. Log: The value of log determines the log2 operation of data matrix (Default value:Checked)
  4. Pseudo-Count: This value added to each element to prevent getting undefined (logarithm of zero) before calculation of log2(Default value:0.1)

*heatmap scale*

GO Term Plots

The next tab, 'GO Term', takes you to the ontology comparison portion of DEBrowser. From here you can select the standard dataset options such as p-adjust value, fold change cut off value, which comparison set to use, and which dataset to use on the left menu. In addition to these parameters, you also can choose from the 4 different ontology plot options: 'enrichGO', 'enrichKEGG', 'Disease', and 'compareCluster'. Selecting one of these plot options queries their specific databases with your current DESeq results.

*Figure 17. GO plots opts*

Your GO plots include:

The types of plots you will be able to generate include:

Summary plot:

*Figure 18. go summary*

GOdotplot:

*Figure 19. go dot plot*

Changing the type of ontology to use will also produce custom parameters for that specific ontology at the bottom of the left option panel.

Once you have adjusted all of your parameters, you may hit the submit button in the top right and then wait for the results to show on screen!

Data Tables

The last tab at the top of the screen displays various different data tables. These datatables include:

*Figure 20. datatable*

All of the tables tables, except the Comparisons table, contain the following information:

The Comparisons table generates values based on the number of comparisons you have conducted. For each pairwise comparison, these values will be generated:

*Figure 21. comparisons*

You can further customize and filter each specific table a multitude of ways. For unique table or dataset options, select the type of table dataset you would like to customize on the left panel under 'Choose a dataset' to view it's additional options. All of the tables have a built in search function at the top right of the table and you can further sort the table by column by clicking on the column header you wish to sort by. The 'Search' box on the left panel allows for multiple searches via a comma-separated list. You can additionally use regex terms such as "^al" or "*lm" for even more advanced searching. This search will be applied to wherever you are within DEBrowser, including both the plots and the tables.

You can also view specific tables of your input data for each type of dataset available and search for a specific geneset by inputting a comma-separated list of genes or regex terms to search for in the search box within the left panel. To view these tables, you must select the tab labeled 'Tables' as well as the dataset from the dropdown menu on the left panel.

Quality Control Plots

Selecting the 'QC Plots' tab will take you to the quality control plots section. The page opens with a Principal Component Analysis (PCA) plot and users can also view a All2All, heatmap, IQR, and density by choosing Plot Type in the left panel. Here the dataset being used in the plots, depends on the parameters you selected in the left panel. Therefore, you are able to adjust the size of the plots under 'width' and 'height' as well as alter a variety of other parameters to adjust the specific plot you're viewing.

Principal Component Analysis (PCA) is excellent method of checking replicates. PCA calculates the variance between all of the samples genes within your current comparison set and creates a two-dimensional graph to represent the proportion of variance explained in different components. Within the PCA plot section you can select the p-adjust value, fold change cut off value, which comparison set to use, which dataset to use, the height and width of the corresponding plots, as well as which principal components to analyze by changing the appropriate values on the left menu.

The All2All plot displays the correlation between each sample, Heatmap shows a heatmap representation of your data, IQR displays a barplot displaying the IQR between samples, and Density will display an overlapping density graph for each sample. You also have the ability to select the type of clustering and distance method for the heatmap produced to further customize your quality control measures. Users also have the option to select which type of normalization methods they would like to use for these specific plotting analysis within the left menu.

*Figure 22. intro sidebar*

Ploting Options

*Figure 23. intro qc all2all*

All2All Plot

*Figure 24. intro qc heatmap*

Heatmap Options to Normalize All Detected Data and Created Heatmap

*Figure 25. intro qc PCA*

PCA Plot

*Figure 26. intro qc pca loads*

PCA Loadings

*Figure 27. iqr plot*

IQR Plot Before Normalization

*Figure 28. iqr plot norm*

IQR Plot After Normalization

*Figure 29. density plot*

Density Plot Before Normalization

*Figure 30. density plot norm*

Density Plot After Normalization

With that, you've now successfully navigated the DEBrowser and are ready to start inserting your own data files and browsing your own experiments. Enjoy the DEBrowser!

Examples

This guide is walkthrough for the preparation of figures which is used in DEBrowser paper. PCA, Heatmap, All2All will be plotted as an example for QC plots. Next, differential expression analysis will be conducted and their results will be visualized with Main plots such as Scatter, Volcano and MA. More detailed analysis will be covered by using simultaneously created Heatmap and KEGG pathway on the selected portion of the data.

QC plots without Batch Effect Correction

1) Upload Data: To begin the analysis, you need to load Demo Data by clicking Load Demo (Donnard et al)! button. Then click on Filter button to start Low Count Filtering. 2) Low Count Filtering: Filtering method is selected as Max with cutoff 10 (which filter genes where maximum count for each gene across all samples are less than 10) and activated by clicking Filter button which is located at the center of the page. After filtration you can see the distribution of the data as shown at below. Now, you can proceed by clicking Batch Effect Correction button.

*Figure 31. example filtering*

3) Batch Effect Correction and Normalization: Following options were selected to normalize the data: 

* **Normalization method:** MRN
* **Correction Method:** None

In order to adjust the appearance, use PCA controls which is located between two PCA plots.

*Figure 32. example pca before batch*

4) All2All: After batch effect correction, you can click 'Go to QC plots!' to view quality control metrics on your data. The page opens with a Principal Component Analysis (PCA) plot. You can select All2All option from Plot type on the left sidebar menu. In order to get the figure as shown at below, you need to adjust other parameters of plot options on the left sidebar menu.

*Figure 33. example all2all before*

*Figure 34. example all2all menu*

5) Heatmap: To visualize heatmap as shown at below, please select Heatmap option from Plot type on the left sidebar menu and adjust plot options.

*Figure 35. example heatmap before*

*Figure 36. example heatmap menu*

QC plots after Batch Effect Correction

Since we finalized out plots without applying batch effect correction, we can return back to batch effect correction step and change the Correction Method as Combat and continue to create new graphs with the same parameters as we used before. To make it more user friendly, we are going to start explain these steps from the beginning. If you choose to continue from batch effect correction, please skip first two steps and continue reading from 3rd step: Batch Effect Correction and Normalization.

1) Upload Data: To begin the analysis, load Demo Data by clicking Load Demo (Donnard et al)! button. Then click on Filter button to start Low Count Filtering. 2) Low Count Filtering: Select Max method with cutoff 10 (which filter genes where maximum count for each gene across all samples are less than 10), then click Filter button which is located at the center of the page. After filtration, proceed to next step by clicking Batch Effect Correction button.

3) Batch Effect Correction and Normalization: Following options were selected to apply both normalization and batch effect correction: 

* **Normalization method:** MRN
* **Correction Method:** Combat
* **Treatment:** treatment
* **Batch:** batch

*Figure 37. example pca after batch effect correction*

4) All2All: After batch effect correction, click 'Go to QC plots!' and select All2All option from Plot type on the left sidebar menu. Please adjust All2All - Plot Options as listed below.

*Figure 38. example all2all after batch effect correction*

*Figure 39. example all2all menu*

5) Heatmap: Please select Heatmap option from Plot type on the left sidebar menu and adjust plot options according to the list below.

*Figure 40. example heatmap after batch effect correction*

*Figure 41. example heatmap menu*

The Differential Expression Plots

1) Upload Data: To begin the analysis, load Count Data by clicking Load Demo (Vernia et. al)! button. Then click on Filter button to start Low Count Filtering. 2) Low Count Filtering: Select Max method with cutoff 10 (which filter genes where maximum count for each gene across all samples are less than 10), then click Filter button which is located at the center of the page. Proceed to next step by clicking Batch Effect Correction button. 3) Batch Effect Correction and Normalization: We are going to skip both normalization and batch effect correction by selecting following options: 

* **Normalization method:** None
* **Correction Method:** None

4) DE Analysis: After batch effect correction, click 'Go to DE Analysis'. In this page, we will add groups for comparison. Click on Add New Comparison button and select Select Meta as treatment. It will automatically separate experiment and control data into two groups. You can leave other parameters as default as listed below and click "Submit" button.

* **DE method:** DESeq2
* **Fit Type:** parametric
* **betaPrior:** FALSE
* **Test Type:** Wald

*Figure 42. example DE form*

5) Main Plots Analysis: Upon finishing the DESeq analysis, you will see DE Results in table format. Please click on Go to Main Plots! button which will open Scatter Plot. You can switch to Volcano Plot and MA Plot by using Plot Type section at the left side of the menu. Since these plots are interactive, you can click to zoom button on the top of the graph and select the area you would like to zoom in by drawing a rectangle. Please see the plots at below:

*Figure 43. example main plots*

Please keep in mind that to increase the performance of the generating graph, by default 10% of non-significant(NS) genes are used to generate plots. We used all of the NS genes in our plots that showed above, therefore please click Main Options button and change Background Data(%) to 100% on the left sidebar.

*Figure 44. example background data*

6) Read count plots: Lets return back to Scatter Plot by using Plot Type section. You can hover on each point on the graph to see their read counts as a bar graph as shown at below. In this example FABP3 is selected to show the high variance of this gene across samples.

*Figure 45. example scatter hover*

If you want to mark FABP3 gene on the plot, click on Data Options and enter FABP3 in to the search field as showed below. You will see green mark on the plot that shows FABP3.

*Figure 46. example scatter search*

7) Lasso selection: DEBrowser can draw heatmaps of any selected region of any main plot. Selection can be made in a rectangular form or as a free-form using plotly’s lasso select. To do so, first click NS label at the upper right side of the figure, and hide non-significant genes. Then click on lasso select button at the top of the plot and select the genes you're interested as shown at below. Heatmap will appear just next to scatter plot. Additionally, you can activate interactive mapping option for heatmap by clicking Interactive button under Heatmap Options on the left sidebar menu. Now, you can hover on each block of heatmap to see gene name and its value.

Interactive Feature: In order to increase the performance of the generating heatmaps, interactive option is disabled by default. After deciding plotting/clustering parameters of the heatmap, you might activate this feature to investigate each block in detail.

*Figure 47. example scatter lasso*

*Figure 48. example scatter lasso heatmap*

8) Scatter plot of the genes enriched in insulin signaling pathway: In this example, we will highlight genes enriched in insulin signaling pathway. If you already hid NS genes, you can show them by clicking on the NS label at the upper right side of the figure. Click on the Data Options and enter following genes in to the search field: 

    Cbl
    Sos1
    Irs2
    Insr
    Ptprf
    Tsc1
    Crkl
    Prkar2a
    Acaca
    Fasn
    Mapk8
    Ppp1r3b
    Ppp1r3c
    Srebf1
    Pklr
    Pik3r1
    Pygl
    Pik3r3
    Socs4
    Socs2
    Eif4ebp1

Now, you will see green marks on the searched genes as shown below:

*Figure 49. example scatter insulin A*

Lets, hide all the genes other then searched genes by clicking NS, Up and Down labels at the upper right side of the figure. Since only the selected genes are left on the graph, we can select these genes by clicking on Select Box icon and drawing a rectangle which covers all of these genes.

*Figure 50. example scatter insulin selection*

Here as shown below, heatmap will be simultaneously created just next to scatter plot. You might need to change plot margins as following:

*Figure 51. example scatter insulin before normalization*

Since the data is not normalized, data of exper_rep3 looks like it belongs to control group. We strongly recommend normalization before plotting subset of genes. To normalize, please change the parameters as described below and see the updated figure at below:

*Figure 52. example scatter insulin B*

Activating Interactive feature transforms the heatmap into an interactive version with two colors, allowing you to select specific genes to be compared within the GO term plots.

Log2 fold change comparison for PPARα pathway

1) Upload Data: To begin the analysis, download full dataset (Vernia et. al) https://umms.dolphinnext.com/pub/debrowser/advanced_demo.tsv and full metadata https://umms.dolphinnext.com/pub/debrowser/advanced_meta.tsv on your computer. Then click browse button, and select downloaded files from your computer. Please keep Separator as Tab while this processes. Finally click upload button to see Upload Summary. Now you can click on Filter button to start Low Count Filtering.

2) Low Count Filtering: Select Max method with cutoff 10 (which filter genes where maximum count for each gene across all samples are less than 10), then click Filter button which is located at the center of the page. We are going to skip normalization and batch effect correction step by clicking 'Go to DE Analysis' button.

3) DE Analysis: In this page, we will add multiple groups for comparison. Click on Add New Comparison button and select Select Meta as Cond1. Repeat this step for Cond2 and Cond3 and add two more comparisons. It will automatically separate experiment and control data into two groups. You can leave other parameters as default as listed below and click "Submit" button.

* **DE method:** DESeq2
* **Fit Type:** parametric
* **betaPrior:** FALSE
* **Test Type:** Wald

*Figure 53. example multiple condition*

4) Downloading fold2Change data of selected genes: Upon finishing the DE analysis, you will see DE Results in table format. Please click on Go to Main Plots! button which will open Scatter Plot. On the left sidebar menu, click *Data options tab and enter following genes regarding to PPARα pathway:

    Cyp4a12b
    Cyp4a14
    Ehhadh
    Cyp8b1
    Cpt1b
    Cyp7b1
    Slc27a1
    Apoa5
    Pdpk1
    Apoa1
    Acadl
    Fads2
    Fabp4
    Acadm
    Apoa2
    Apoc3
    Fgf21
    Fabp5
    Fabp3
    Lpl
    Dbi
    Nr1h3
    Fabp7
    Ppara
    Ucp1
    Sdc1
    Sdc3
    Sdc2
    Fabp2

Afterwards, select comparison option for the Choose a dataset field. This option will add fold change columns to to our data.

Now, we need to disable filtration to get all searched genes in our dataset. To do so, enter following parameters into Filter field on the left sidebar menu.

* **padj:** 1
* **foldChange:** 1

To confirm you can check all adjusted parameters at image below.

*Figure 54. example fold selection*

It is time to download our dataset by clicking Download Data button on the Data Options field. You can open downloaded tsv file in Excel or similar programs. Once you open the file, you will see columns of count data, padj and fold2Change for all comparisons. Since we are only interested in fold2Change columns, you can delete the rest. Final data file should look like image on the left at below.

We will rename column names as follows and add new column called chow.wt which compares chow.wildtype with itself therefore it is filled with 1. 

* **foldChange.C1.vs.C2** to chow.dbl
* **foldChange.C3.vs.C4** to hfd.wt
* **foldChange.C5.vs.C6** to hfd.dbl

To confirm you can also download the final version of the fold2data from this link: https://umms.dolphinnext.com/pub/debrowser/comparisons.tsv

*Figure 55. example table conversion*

5) Creating Heatmap for fold2change data: To create heatmap for fold change data, you have two options: A. Using startHeatmap() function or B. Use DEBrowser Heatmap module.

* A. Open new R session and run following command in R or R Studio to run Heatmap module in web browser:

    startHeatmap()

Similar to DEBrowser, you can click **browse** button, and select prepared log2change file from your computer. Please keep **Separator** as **Tab**. Finally click **upload** button to see **Upload Summary**. 

* B. Open new R session and run following command in R or R Studio to load dataset as data frame (comparisons)::

    comparisons <- read.delim("~/Downloads/comparisons.tsv", row.names=1)

You may need to change the path of the file according to your folder structure. Now, in order to open heatmap module, you need to run following script:

    library(debrowser)
    library(DESeq2)
    library(heatmaply)
    library(RColorBrewer)
    library(gplots)

    options(warn=-1)
    header <- dashboardHeader(title = "DEBrowser Heatmap")
    sidebar <- dashboardSidebar(  getJSLine(), sidebarMenu(id="DataAssessment",
        menuItem("Heatmap", tabName = "Heatmap"),
        plotSizeMarginsUI("heatmap"),
        heatmapControlsUI("heatmap")))
    body <- dashboardBody(
        tabItems(
        tabItem(tabName="Heatmap",  getHeatmapUI("heatmap"),
            column(4, verbatimTextOutput("heatmap_hover"), verbatimTextOutput("heatmap_selected")
            )
        )
    ))

    ui <- dashboardPage(header, sidebar, body, skin = "blue")

    server <- function(input, output, session) {
    selected <- reactiveVal()
    observe({
        withProgress(message = 'Creating plot', style = "notification", value = 0.1, {
        selected(callModule(debrowserheatmap, "heatmap", comparisons))
        })
    })
    output$heatmap_hover <- renderPrint({
        if (!is.null(selected()) && !is.null(selected()$shgClicked()) && selected()$shgClicked() != "")
            return(paste0("Clicked: ",selected()$shgClicked()))
        else
            return(paste0("Hovered:", selected()$shg()))
    })
    output$heatmap_selected <- renderPrint({
        if (!is.null(selected()))
            selected()$selGenes()
    })
    }

    shinyApp(ui, server)

Shiny will launch a web browser which is ready to use as a heatmap module. You need to specify following parameters to create log2fold change graph:

* **Interactive:** Checked
* **Custom Colors:** Checked
* **Custom Colors -> Choose min colour:** #33FF00
* **Custom Colors -> Choose median colour:** #000000
* **Custom Colors -> Choose max colour:** #FF0000
* **Heatmap Dendrogram -> Type:** none
* **Scale Options -> Scale:** Checked
* **Scale Options -> Center:** Unchecked
* **Scale Options -> Log:** Checked
* **Scale Options -> Pseudo Count:** 0

Once you specify these parameters, your heatmap will be seen as image at below.

*Figure 56. example log heatmap*

Case Study

Taking a look at the case study (Vernia S. et al 2014), Multiple heatmaps were created to display findings within the research. The heatmaps generated for the study were customized to a high level of specificity. However, using a sample dataset generated from this study, it is possible to recreate similar heatmaps (Figure 31-32) displayed within the studies findings.

*Figure 31. All detected genes heatmap using case study data.*

*Figure 32. Most varied genes heatmap using case study data.*

The main difference between the heatmaps created within DEBrowser and the heatmaps created within the research paper is that the clustering method used within the paper was a k-means method with k equaling 6.

The JNK2 Knock-out versus JNK1 Knock-out:

High fat diet JNK1 knock-out and JNK2 knock-out samples compared against high fat diet wild type samples showed a stronger effect from JNK2 KO.
From the figures below, JNK2 KO has a stronger effect than JNK1 KO samples. There are 177 genes (Figure 33) that have padj < 0.01 and |log2 foldchange| > 1 in the JNK2 KO comparison while there are only 17 genes (Figure 34) detected in the JNK1 KO comparison with the same cutoffs.

*Figure 33. High fat diet JNK2 vs. High fat diet wild type.*

*Figure 34. High fat diet JNK1 vs. High fat diet wild type.*

JNK1 and JNK2 serve partially redundant functions:

High fat diet JNK1 and High fat diet JNK2 double KO has 1018 significantly different genes. When we compare HFD JNK1 KO only (177 Genes) and HFD JNK2 KO only (17 genes) with HFD wild type side-by-side, most of the up and down regulated genes are not overlapping. Up regulated genes (Figure 35.) and down regulated (Figure 36.) in JNK1 KO was easy to analyze for these gene comparisons. There is only 1 gene overlapping out of the 17 that were significantly different in JNK1 KO comparisons with padj < 0.01 and |log2foldchange| > 1 cutoffs. It shows that both individual KO might have individual functions in addition to their redundant functions. When we looked at the genes in JNK1 KO in the KEGG database, they are enriched in "Fatty acid elongation”. JNK2 KO are enriched in "PPAR signaling pathway” and "Biosynthesis of unsaturated fatty acids”. DEBrowser’s powerful comparison function makes different condition comparisons and running GO Term analysis on selected genes much easier.

*Figure 35. Upregulated genes in hfd JNK1 KO (C1) vs. hfd wt (C2) DE comparison shows 4 upregulated genes (padj <0.01 and |log2foldchange| > 1).*

*Figure 36. Downregulated genes in hfd JNK1 KO (C1) vs. hfd wt (C2) DE comparison shows 13 downregulated genes (padj <0.01 and |log2foldchange| > 1). Only one of them is in JNK2 KO (C3) vs. hfd wt (C4) DE comparison.*

Comparing the HFD wild type and the normal chow wild type also shows significant differences between regulated genes (Figure 37). Expanding on the analysis further, the upregulated genes analyzed are then compared to KEGG and Disease ontologies to show a variety of metabolism related correlations (Figures 38-39).

Using the 'advanced demo' dataset we mentioned earlier, you too can recreate these tables using the same data. Browsing, changing parameters, and creating unique plots to view and analyze data can be a creative way to recreate the same analytical results produced. DEBrowser can be used in multiple ways to check the reproducibility of research results in a highly interactive format!

DEBrowser vs other Differential Expression analysis software:

The comparison table (Figure 40) displays multiple comparisons between debrowser and other various methods of viewing Differential Expression Analysis results.

Some of the comparisons can be viewed either within the tool itself or within some of the figures provided. A multiple tool comparison can be observed within figure 34, an interactive visualization of gene highlighting can be observed for figures 12-14, and an interactive visualization of biological variation or condition comparisons can also be observed for figure 34.

For more information on MeV (Howe et al., 2011) please visit this link: MeV

For more information about Chipster (Kallio et al., 2011), please visit this link: Chipster

For more information about Galaxy (Giardine et al., 2005), please visit this link: Galaxy

For more information about CummeRBund (Trapnell et al., 2012), please visit this link: CummeRbund

*Figure 40. Comparison table of DEBrowser, MeV, Chipster, Galaxy, and CummeRBund*

Operating System Dependencies

On Fedora/Red Hat/CentOS, these packages have to be installed:

openssl-devel, libxml2-devel, libcurl-devel, libpng-devel

On Ubuntu 18.04 LTS, you can install required packages by following command:

sudo apt-get install libcurl4-openssl-dev libssl-dev libv8-3.14-dev udunits-bin libudunits2-* libxml2-dev

Autoload Data via Hyperlink

DEBrowser also accepts JSON files via hyperlink.

1. jsonobject=https://umms.dolphinnext.com/pub/debrowser/advanced_demo_org.json

Now this link can be used in debrowser as::

https://debrowser.umassmed.edu/?jsonobject=https://umms.dolphinnext.com/pub/debrowser/advanced_demo_org.json

If you'd like to add metadata::

2. meta=https://umms.dolphinnext.com/pub/debrowser/advanced_meta.json

https://debrowser.umassmed.edu/?jsonobject=https://umms.dolphinnext.com/pub/debrowser/advanced_demo_org.json&meta=https://umms.dolphinnext.com/pub/debrowser/advanced_meta.json

Inputting this URL into your browser will automatically load in that tsv to be analyzed by DEBrowser!

References

  1. Anders,S. et al. (2014) HTSeq - A Python framework to work with high-throughput sequencing data.

  2. Chang,W. et al. (2016) shiny: Web Application Framework for R.

  3. Chang,W. and Wickham,H. (2015) ggvis: Interactive Grammar of Graphics.

  4. Giardine,B. et al. (2005) Galaxy: a platform for interactive large-scale genome analysis. Genome Res., 15, 1451–1455.

  5. Howe,E.A. et al. (2011) RNA-Seq analysis in MeV. Bioinformatics, 27, 3209–3210.

  6. Kallio,M.A. et al. (2011) Chipster: user-friendly analysis software for microarray and other high-throughput data. BMC Genomics, 12, 507.

  7. Li,B. and Dewey,C.N. (2011) RSEM: accurate transcript quantification from RNA-Seq data with or without a reference genome. BMC Bioinformatics, 12, 323.

  8. Love,M.I. et al. (2014) Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2. Genome Biol., 15, 550.

  9. Reese,S.E. et al. (2013) A new statistic for identifying batch effects in high-throughput genomic data that uses guided principal component analysis. Bioinformatics, 29, 2877–2883.

  10. Reich,M. et al. (2006) GenePattern 2.0. Nat. Genet., 38, 500–501.

  11. Risso,D. et al. (2014) Normalization of RNA-seq data using factor analysis of control genes or samples. Nat. Biotechnol., 32, 896–902.

  12. Ritchie,M.E. et al. (2015) limma powers differential expression analyses for RNA-sequencing and microarray studies. Nucleic Acids Res., 43, e47–e47.

  13. Trapnell,C. et al. (2012) Differential gene and transcript expression analysis of RNA-seq experiments with TopHat and Cufflinks. Nat. Protoc., 7, 562–578.

  14. Vernia,S. et al. (2014) The PPAR$\alpha$-FGF21 hormone axis contributes to metabolic regulation by the hepatic JNK signaling pathway. Cell Metab., 20, 512–525.

  15. Murtagh, Fionn and Legendre, Pierre (2014). Ward's hierarchical agglomerative clustering method: which algorithms implement Ward's criterion? Journal of Classification 31 (forthcoming).

  16. Johnson et al. (2007) Adjusting batch effects in microarray expression data using empirical Bayes methods. Biostatistics, 8, 118-127.