HackCube

Hardware

Arduino Micro Pro 3.3V

• CC1101 433MHz
• CC1101 315MHz
• nRF24L01+ PA (2.4Ghz)
• EM4095 (125Khz)
• 32U4 HID

Raspberry Pi Zero W

• USB2514B 4*USB HUB
• RTL8822BU (2.4Ghz/5Ghz ac) (Bluetooth 4.1)
• PN532 (13.56 Mhz)
• BCM43438 (2.4Ghz) (Bluetooth 4.1)

other

• 8*8 RGB LED
• TI BQ25895 Supports Max Charge (QC3.0)
• TI TPS61088

NFC: Read 125Khz and 13.56Mhz card.

Read 125Khz(EM4100 Card)

RF: Support 315Mhz 433Mhz 2.4Ghz sniffer and injection.

Sniffer 433Mhz Remote and nRF24l01

TMPS attack (433.92Mhz FSK)

RF_attack (315Mhz)

nRF24l01 attack (2.4Ghz)

433MHz Remote and HID

HID: Simulate as a HID device.

WIFI: Capture data from the chosen channel, and bloke any chosen AP or Clients.

Other:Can extend other modules, such as 27Mhz toy remote

27Mhz attack

NFO: Interface for system status and Arduino board firmware upgrade

LED