Stop! Before you proceed:
This Get Started Guide is an older version and it is neither maintained nor supported anymore.
It is kept here for reference only and should not be used for any new development.
If you’re looking for a Get Started guide to the Espressif ESP32 there are two alternatives available:
- _Azure IoT SDK for C which uses a bare metal approach (no RTOS) and support for Arduino IDE._
- Azure IoT middleware for FreeRTOS which uses ESP-IDF.
This library is a port of the Microsoft Azure IoT device SDK for C to Arduino for esp32 devices. It allows you to use several Arduino compatible ESP32 boards with Azure IoT Hub.
It should also work for other esp32 boards.
You should have the following ready before beginning with any board:
Install esp32 board support into your Arduino IDE.
Open the SimpleMQTT
or GetStarted
example from the Arduino IDE File->Examples->ESP32 Azure IoT Arduino.
Update Wifi SSID/Password and IoT Hub Connection string in ino file
Access the Get Started tutorial to learn more about how to get started with physical devices.
There are a couple of ways you can contribute to this repo:
Contributions for code that is not esp32 Arduino-specific can be made to the Azure IoT C SDK
This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact opencode@microsoft.com with any additional questions or comments.
See LICENSE file.