A service for Venus OS, reading smart meter data from a SMA system (SMA-EM Speedwire Broadcast) and making the values available on dbus.
The Python script listen to the SMA-EM broadcast and publishes information on the dbus, using the service name com.victronenergy.grid. This makes the Venus OS work as if you had a physical Victron Grid Meter installed.
Not needed
SSH to your Device and use the following commands one after eachother:
opkg update
opkg install git
cd /data
git clone https://github.com/Waldmensch1/venus.dbus-sma-smartmeter dbus-sma-smartmeter
cd dbus-sma-smartmeter
chmod 755 install.sh
./install.sh
After running install.sh the service should be configured and running
Copy the files to the /data folder on your venus:
Set permissions for files:
chmod 755 /data/dbus-sma-smartmeter/service/run
chmod 755 /data/dbus-sma-smartmeter/kill_me.sh
chmod 755 /data/dbus-sma-smartmeter/rc.local
Get two files from the velib_python and install them on your venus:
Add a symlink to the file /data/rc.local:
ln -s /data/dbus-sma-smartmeter/service /service/dbus-sma-smartmeter
Or if that file does not exist yet, store the file rc.local from this service on your Raspberry Pi as /data/rc.local . You can then create the symlink by just running rc.local:
make it executable with
chmod 755 /data/rc.local
/data/rc.local
The daemon-tools should automatically start this service within seconds.
You can check the status of the service with svstat:
svstat /service/dbus-sma-smartmeter
It will show something like this:
/service/dbus-sma-smartmeter: up (pid 10078) 325 seconds
If the number of seconds is always 0 or 1 or any other small number, it means that the service crashes and gets restarted all the time.
When you think that the script crashes, start it directly from the command line:
python /data/dbus-sma-smartmeter/dbus-sma-smartmeter.py
and see if it throws any error messages.
If the script stops with the message
dbus.exceptions.NameExistsException: Bus name already exists: com.victronenergy.grid"
it means that the service is still running or another service is using that bus name.
Within repo you find a script speedwire_test.py. You can run it on your target machine to see whether UDP Broadcast is received. The script just listen an print received values on console. There is no dependency to VenusOS, means it should run on any Linux box where Python is installed
Output should look like this:
pregardcounter: 5861.8kWh
surplus: 0.0W
surpluscounter: 7532.98kWh
L1_voltage: 237.09V
L2_voltage: 226.54V
L3_voltage: 222.84V
L1_pregard: 251.1W
L2_pregard: 0.0W
L3_pregard: 5.9W
L1_surplus: 0.0W
L2_surplus: 214.2W
L3_surplus: 0.0W
power: 42.9W
L1_power: 251.1W
L2_power: -214.2W
L2_power: 5.9W
L1_current: 1.06A
L2_current: -0.95A
L3_current: 0.03A
pregard: 18.3W
pregardcounter: 5861.8kWh
surplus: 0.0W
surpluscounter: 7532.98kWh
L1_voltage: 237.26V
L2_voltage: 226.1V
L3_voltage: 222.97V
L1_pregard: 242.5W
L2_pregard: 0.0W
L3_pregard: 0.0W
L1_surplus: 0.0W
L2_surplus: 223.1W
L3_surplus: 1.1W
power: 18.3W
L1_power: 242.5W
L2_power: -223.1W
L2_power: -1.1W
L1_current: 1.02A
L2_current: -0.99
If you want to restart the script, for example after changing it, just run the following command:
/data/dbus-sma-smartmeter/kill_me.sh
The daemon-tools will restart the script within a few seconds.
It should work with