!!!! Final version - I'm not maintaining this plugin anymore. Recently migrated to Home Assistant.

Domoticz-Unifi-Presence

This plugin detects devices - usualy phone(s) - on a Unifi (Controller) network. When a phone is detected on the network it turns on the corresponding switch. If the switch AnyOne is Off it will be turned on. If the last configured phone is off, the switch AnyOne will be switched off.

Be aware that some phones have the ability to mask their MAC address.This can be configured in the Wi-Fi settings of the phone. To use this plugin the connection to the Wi-Fi network must be done with the real MAC address of the phone.

Normal use without the option to block a configured user:

ble_tag ble_tag ble_tag ble_tag

With the option to block a configured user:

ble_tag ble_tag

With the option for Geofencing devices:

ble_tag ble_tag

Hardware information: It's tested in this setup: Controller, Gateway, Switch, Access Points. ble_tag ble_tag ble_tag ble_tag ble_tag ble_tag ble_tag ble_tag

Versions

1.0.0: First release
2.0.0: New connection code, new function to block and unblock user devices

Introduction

There is a good Dzvents script, but I wanted to create a plugin for this. This plugin works with this setup (all three present):

Unifi Controller installed on a Raspberry Pi 3b
Unifi Gateway
Unifi Switch
Unifi Access Points

Installation

The plugin is tested to works with the Unifi Controller installed on a Raspberry Pi 3b.

Prerequisite:

A working Unifi Controller setup. Tested with version 6.0.36.

Install plugin on Domoticz (only Linux is supported)

To install the plugin login to the Raspberry Pi (SSH / Putty).

    cd /home/<username>/domoticz/plugin

    git clone https://github.com/Wizzard72/Domoticz-Unifi-Presence

    sudo systemctl restart domoticz.service

Go to the hardware tab in Domoticz and select by field Type: Unifi Presence. Fill in all fields:	Field	Information
IP Address / DNS name of the Unifi Controller:	The IP Address or the DNS name of the Unifi Controller portal.
Port:	The port number of the Unifi Controller Portal.
Username:	An Unifi administrator account.
Password:	The password of the Unifi Administrator.
Site Name:	The Unifi Site name.
MAC Phone Addresses:	The MAC addresses of the phones to be detected. Syntax: User A=00:00:00:00:00:00,User B=11:11:11:11:11:11
Enable Geofencing devices:	This creates Geofencing devices for the configured phones
Interval in seconds:	The interval to query the Unifi Controller.
Posibility to block devices from the network?:	The ability to block and unblock devices from the Unifi Controller.
Debug:	Debug information.

Update

Update plugin to latest version:

    cd /home/<username>/domoticz/plugin

    git pull

    In Domoticz Hardware page: Disable the Alarm System for Domoticz plugin

    In Domoticz Hardware page: Enable the Alarm System for Domoticz plugin

Wizzard72 / Domoticz-Unifi-Presence

readme