search

Xinyuan-LilyGO / T-Display-S3-AMOLED

An upgraded version of T-Display-S3. It has a high-resolution color screen and more configurable GPIO ports. Enrich your needs.
MIT License
143 stars 29 forks source link

What board to select for T-Display-S3-AMOLED in Arduino IDE? #19

Closed martinglass closed 3 months ago

martinglass commented 7 months ago

What board to select for the T-Display-S3-AMOLED?

I've followed the README.md file in this repo, but there appears to be a crucial step missing in the instructions for the Arduino IDE.

Step 5 says "Select the correct settings", but there are no instructions beforehand about what board to select. The obvious choice T-Display-S3-Amoled does not show up in the list of ESP32 boards.

4. Copy everything from this repository lib folder to Arduino library folder (e.g. C:\Users\YourName\Documents\Arduino\libraries) 5 .Select the correct settings in the Tools menu as shown below.

Can someone help, please?

PS I've noticed that in this repo's board folder there is a json file for the s3 Amoled board, but it's not showing up in the Arduino IDE. https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/blob/main/boards/lilygo-t-amoled.json

Also, the board list in PlatformIO doesn't show a line for the S3-Amoled board : https://registry.platformio.org/platforms/platformio/espressif32/boards?p=14

3Dsf-info commented 7 months ago

I found getting information on the board quite difficult. I wrote up some stuff on what worked for me. Halfway down the page.

https://sites.google.com/site/3dsfinfo/lights-for-model-makers-technology-and-techniques/high-rez-microcontroller-displays

On 15 Dec 2023, at 23:13, martinglass @.***> wrote:

What board to select for the T-Display-S3-AMOLED?

I've followed the README.md file in this repo, but there appears to be a crucial step missing in the instructions for the Arduino IDE.

Step 5 says "Select the correct settings", but there are no instructions beforehand about what board to select. The obvious choice T-Display-S3-Amoled does not show up in the list of ESP32 boards.

  1. Copy everything from this repository lib folder to Arduino library folder https://docs.arduino.cc/software/ide-v1/tutorials/installing-libraries#manual-installation (e.g. C:\Users\YourName\Documents\Arduino\libraries) 5 .Select the correct settings in the Tools menu as shown below.

Can someone help, please?

PS I've noticed that in this repo's board folder there is a json file for the s3 Amoled board, but it's not showing up in the Arduino IDE. https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/blob/main/boards/lilygo-t-amoled.json

— Reply to this email directly, view it on GitHub https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/issues/19, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7J3EYPS36G7TZI5OA7MDMTYJTKSNAVCNFSM6AAAAABAXDKAJOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGA2DINBYGE3DOOI. You are receiving this because you are subscribed to this thread.

martinglass commented 7 months ago

@3Dsf-info many thanks. In short, you say the board to select is "ESP32S3 Dev Module"

PS I loved your page. Great stuff.

PPS If you've got the money, how about this listing I just saw on Facebook : https://www.facebook.com/marketplace/item/671111165151627/

3Dsf-info commented 7 months ago

All I can say is that it worked for me.

Thanks for the kind words. I’ll pass on the droid replica, though. It was made by a certain notorious builder and isn’t screen-accurate. :)

On 15 Dec 2023, at 23:41, martinglass @.***> wrote:

@3Dsf-info https://github.com/3Dsf-info many thanks. In short, you say the board to select is "ESP32S3 Dev Module"

PS I loved your page. Great stuff.

PPS If you've got the money, how about this listing I just saw on Facebook : https://www.facebook.com/marketplace/item/671111165151627/

— Reply to this email directly, view it on GitHub https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/issues/19#issuecomment-1858612575, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7J3EYKYIA5B643VPCYLHKDYJTN4FAVCNFSM6AAAAABAXDKAJOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNJYGYYTENJXGU. You are receiving this because you were mentioned.

martinglass commented 7 months ago

Hi Lewis,

Thanks for confirming that.

Not sure this is the best place to give feedback, but I just want to say a big thank you for all the LilyGo products you do. They're really great and getting better all the time.

Regards, Martin

From: Lewis He @.> Sent: 16 December 2023 00:16 To: Xinyuan-LilyGO/T-Display-S3-AMOLED @.> Cc: martinglass @.>; Author @.> Subject: Re: [Xinyuan-LilyGO/T-Display-S3-AMOLED] What board to select for T-Display-S3-AMOLED in Arduino IDE? (Issue #19)

ESP32 S3 Dev Module

— Reply to this email directly, view it on GitHubhttps://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED/issues/19#issuecomment-1858631147, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AJ2YA5T3G4WEOS2QYEGDWITYJTR65AVCNFSM6AAAAABAXDKAJOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNJYGYZTCMJUG4. You are receiving this because you authored the thread.Message ID: @.***>

lewisxhe commented 7 months ago

This repository was created by @mmMicky earlier, LilyGo-AMOLED-Series also supports the non-touch version. For the non-touch version, it can be used in two Choose between warehouses

github-actions[bot] commented 3 months ago

This issue is stale because it has been open for 30 days with no activity.

github-actions[bot] commented 3 months ago

This issue was closed because it has been inactive for 14 days since being marked as stale.