Xinyuan-LilyGO / T-Touchbar-AMOLED

7 stars 0 forks source link



🌟T-Touchbar-AMOLED🌟

Arduino

  1. In Arduino Preferences, on the Settings tab, enter the https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json URL in the Additional boards manager URLs input box.
  2. Click OK and the software will install.
  3. Search for ESP32 in Tools → Board Manager and install ESP32-Arduino SDK (Use fixed version 2.0.14, version 3.0 cannot be compiled smoothly)
  4. Copy everything from this repository lib folder to Arduino library folder (e.g. C:\Users\YourName\Documents\Arduino\libraries)
  5. Select the correct settings in the Tools menu as shown below.
Setting Value
Board ESP32S3 Dev Module
Upload Speed 921600
USB Mode Hardware CDC and JTAG
USB CDC On Boot Disabled
USB DFU On Boot Disabled
CPU Frequency 240MHz (WiFi)
Flash Mode QIO 80MHz
Flash Size 16MB (128Mb)
Partition Scheme 16MB Flash (3MB APP/9.9MB FATFS)
Core Debug Level
PSRAM OPI PSRAM
Events Run On Core 1
Arduino Runs On Core 1
Erase All Flash Before Sketch Upload Disabled
JTAG Adapter Disabled

PlatformIO

  1. PlatformIO plug-in installation: click on the extension on the left column → search platformIO → install the first plug-in
  2. Click Platforms → Embedded → search Espressif 32 in the input box → select the corresponding firmware installation