Yona-Appletree LEDscape issues

Yona-Appletree / LEDscape

Beagle Bone Black cape and firmware for driving a large number of WS281x LED strips.

126 stars 58 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

lap-pru22-v3 device tree fail after reboot

#71 nargetdev opened 2 years ago
0
modernizing to 10.3 "flasher" image

#70 nargetdev opened 2 years ago
2
Compile of opc-server.c fails on Debian 10.3 on BBB

#69 pscheie opened 2 years ago
5
Error: invalid use of ‘__builtin_va_arg_pack ()’

#68 mx-marcelr closed 2 years ago
2
How to implement this repo with Beaglebone Black

#67 rajmehta28599 opened 3 years ago
0
Keep working row of pixels into PRU RAM, use `devmemkm` for low GPIO latency, new `redbeat` demo, update README.

#66 bigjosh closed 3 years ago
1
Suppress pins

#65 bigjosh closed 3 years ago
0
License clarification

#64 sammunich opened 5 years ago
2
I've refactored the code to be easier to maintain

#63 gsasha opened 5 years ago
0
Selectable PRU usage

#62 theShao opened 6 years ago
1
Running as a service causes random freezes

#61 cwshep opened 6 years ago
0
Re-add -D_BSD_SOURCE line to Makefile

#60 Ashoat opened 6 years ago
0
e131 support?

#59 cobyhausrath opened 6 years ago
0
Adjust reset timing for new WS2812 chip

#58 jobevers closed 6 years ago
3
Re-add -D_BSD_SOURCE line to Makefile

#57 Ashoat closed 6 years ago
1
install-software.sh failing?

#56 voidnoise opened 7 years ago
2
Beaglebone green wireless steals 2 GPIOs

#55 steely-glint opened 7 years ago
0
Update README, fixing header markdown

#54 whg opened 7 years ago
0
Compilation failure

#53 Ashoat closed 7 years ago
4
Change standard to gnu99

#52 xuio opened 7 years ago
0
Getting Started 4x4 RGB Matrix Beaglebone

#51 asadpiz closed 6 years ago
1
Dithering ficker with low level of strings

#50 joaopmrod closed 1 year ago
1
Very rare but possible glitching on PRU signal generation that can cause unexpected flashes

#49 bigjosh opened 7 years ago
13
Error check various calls so it doesn't segfault if you start without root privs

#48 DanielO closed 7 years ago
1
Support for 1/4 Scan for newer tiles.

#47 thetechknight opened 7 years ago
0
Add a BBG device tree

#46 bigjosh closed 7 years ago
1
Move config file to /etc, limit support to Wheezy, various other superficial changes to help 1st time users

#45 bigjosh closed 7 years ago
3
.

#44 Tocomotxo opened 8 years ago
0
PRU initialization on current build of Debian Jessy, kernel 4.1

#43 Serisium opened 8 years ago
10
Use more than 64 Pixel with Processing

#42 gsandreas closed 7 years ago
3
Development of new template

#41 photon-delight closed 8 years ago
1
New PRU support: rpmsg?

#40 JetForMe opened 8 years ago
4
multipin branch

#39 kersten closed 8 years ago
2
WS2811 not working

#38 SummerSeaSun opened 8 years ago
27
LED display unstable during slow crossfades

#37 mazo123 opened 8 years ago
8
apa102 slower than ws281x?

#36 mecha1 closed 8 years ago
3
Added new 'power' demo mode

#35 bigjosh closed 8 years ago
0
More granular pixel data possible?

#34 mykolasmith closed 9 years ago
7
Branch - spi-cape support

#33 RGB-123 closed 9 years ago
1
Custom Demo Pattern Support

#32 RGB-123 opened 9 years ago
1
Fixed issue #30.

#31 benjamind closed 9 years ago
0
Potential APA102 bug

#30 benjamind closed 9 years ago
0
Added APA102 template

#29 benjamind closed 9 years ago
3
BeagleBoard X-15 support

#28 runvnc opened 9 years ago
1
FPS Limit

#27 jnordberg opened 9 years ago
5
Websocket Support?

#26 markhurlburt opened 9 years ago
1
Slim (console only) Debian build for Beaglebone Black that works with LEDscape?

#25 seriousmumbo opened 9 years ago
6
ledscape_wait() not always waiting

#24 cwshep opened 9 years ago
0
Minor Service and Install Suggestions

#23 cwshep opened 9 years ago
3
Correct Way to Reduce # of Channels?

#22 cwshep opened 9 years ago
0