Method of controlling Fans on Lenovo Legions Gen 5/6
Make sure to run the app (.exe) as ADMIN otherwise IT WON'T WORK. Make sure WinRing0x64.sys is not blocked from being used on your system otherwise the app won't work.
Use the fan_config.txt files values near the .exe after building the sollution
This project was done in my free time wanting to move away from RwDrv.sys and using a driver that is less prone to throw IRQL errors and BSODS. Previously i used LFC (Legion Fan Control by Rodpad) before using a script to control fans that was still using RwDrv.sys albeit in a more secure manner. Huge thanks to SmokelessCPU for allowing me to share the files with you and of course by exposing a way to make use of WinRing0x64.sys and I/O ports to write and read from the EC. https://github.com/SmokelessCPUv2 Huge thanks to @akillisandalye on Discord for helping me with EC mapping.
Disclaimer : Since i don't own a Legion Gen 5 i might not be able to bugfix it nor i'm interested right now, someone could pick up this code and do said fixes. Tested on my Legion Gen 6 Legion 5 Pro and it works flawlessly.
Fan Curves are checked and adjust themselves if needed every 15 seconds, if you build the source yourself you can change the timer in main to a lower value.
You can set fan curves for Fn+Q modes as follow Quiet Mode (1), Balanced Mode (2), and Performance and Custom mode (3/255) will share the same fan curve. I could have separated them but i kept them the same curve since Legion Laptops do the same anyway.
Modify the value of legion_gen in the fan_config.txt files to corespond to your legion generation 5 or 6.
Fan RPM values can be a minimum of 0. i suggest to not use more than 5000, 4400 is lenovo max default in curves, but turbo is usually 5000 range, even if set higher fans will go only as fast as they can spin.
The other values in the config files i provided corespond to my fancurves
# Number of points : 9
# Acceleration/Deceleration Values will be 2
# CPU Temps Ramp Up 11 45 55 60 65 70 75 80 90
# Cpu Temps Ramp Down 10 43 53 58 63 68 73 78 87
# Gpu Temps Ramp Up 11 50 55 60 63 66 69 72 75
# Gpu Temps Ramp Down 10 48 53 58 61 63 67 70 73
# Heatsink Temps Ramp Up 11 50 55 65 70 75 80 85 90
# Heatsink Temps Ramp Down 10 48 53 63 68 73 78 83 85
# RPM Quiet 0 0 0 1800 2500 3200 3500 3800 4400
# RPM Balanced 0 0 2200 3200 3500 3800 4100 4400 4700
# RPM Performance/Custom 0 0 2200 3600 3900 4200 4500 4800 5000Disclaimer regarding fan config files
Do not use more than 9 points otherwise they'll be ignored and issues might be arised, I didn't test that extensively. Using less points than 9 should be fine since i did some padding and checks and it seemed ok but i didn't have the time nor energy to fully go throughly.
Second Disclaimer regarding fan config files If the RPM values ar not in ascending order, or the ramp up and ramp down temps not abiding to an ascending order too fan curves won't work properly. Please make sure to use the rpm values in an ascending order and ramp up and ramp down values too. Also please make sure to have each ramp up value paired with a ramp down value that is smaller than the one it's paired with. Hopefully the config files i provided represent a clear example.
There are some binaries built already but it would be better if everyone compiled them themselves because Windows might flag them. You can find them at FanControl/FanControl/bin/Debug/net8.0
App was built with net8.0. Files that should be present to have the App Running are
runtimes fan_config_balanced.txt fan_config_perfcust.txt fan_config_quiet.txt FanControl.deps.json FanControl.dll FanControl.exe FanControl.pdb FanControl.runtimeconfig.json System.CodeDom.dll System.Management.dll WinRing0x64.dll WinRing0x64.dll WinRing0x64.dll WinRing0x64.sys
it will also display them. If you use less fan curve points but see 10(int) and 0xA fan points always don't worry Because i use padding up to this value, your curve will still be the same, and remember don't use more than 9 points.
Feel free to fork this and modify it as long as you provide the LICENSE.md