.. image:: https://readthedocs.org/projects/adafruit-circuitpython-bme280/badge/?version=latest :target: https://docs.circuitpython.org/projects/bme280/en/latest/ :alt: Documentation Status
.. image:: https://raw.githubusercontent.com/adafruit/Adafruit_CircuitPython_Bundle/main/badges/adafruit_discord.svg :target: https://adafru.it/discord :alt: Discord
.. image:: https://github.com/adafruit/Adafruit_CircuitPython_BME280/workflows/Build%20CI/badge.svg :target: https://github.com/adafruit/Adafruit_CircuitPython_BME280/actions/ :alt: Build Status
.. image:: https://img.shields.io/badge/code%20style-black-000000.svg :target: https://github.com/psf/black :alt: Code Style: Black
I2C and SPI driver for the Bosch BME280 Temperature, Humidity, and Barometric Pressure sensor
This driver depends on:
Adafruit CircuitPython <https://github.com/adafruit/circuitpython>
_Bus Device <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>
_Please ensure that the driver and all dependencies are available on the
CircuitPython filesystem. This can be most easily achieved by downloading and
installing the latest
Adafruit library and driver bundle <https://github.com/adafruit/Adafruit_CircuitPython_Bundle>
_
on your device.
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI <https://pypi.org/project/adafruit-circuitpython-bme280/>
_. To install for current user:
.. code-block:: shell
pip3 install adafruit-circuitpython-bme280
To install system-wide (this may be required in some cases):
.. code-block:: shell
sudo pip3 install adafruit-circuitpython-bme280
To install in a virtual environment in your current project:
.. code-block:: shell
mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-bme280
Some devices, eg. the QT-PY, are very limited in memory. The BME280 library contains two variants - basic and advanced - which give different levels of functionality.
Installing the BME280 library could have the following outcomes:
* It installs successfully and your code runs successfully. Woo-hoo! Continue with
your amazing project.
* It installs successfully and your code fails to run with a memory allocation
error. Try one of the following:
* If your ``code.py`` is large, especially if it has lots of comments, you
can shrink it into a ``.mpy`` file instead. See the Adafruit
`Learn Guide <https://learn.adafruit.com/Memory-saving-tips-for-CircuitPython/non-volatile-not-enough-disk-space>`_
on shrinking your code.
* Only use the basic BME280 implementation, and remove the following file:
``<CIRCUITPY>/lib/adafruit_bme280/advanced.mpy`` where <CIRCUITPY> is the
mounted location of your device. Make sure that your code only uses the basic
implementation.
.. code-block:: python3
import board
import time
from adafruit_bme280 import basic as adafruit_bme280
# Create sensor object, using the board's default I2C bus.
i2c = board.I2C() # uses board.SCL and board.SDA
bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
# change this to match the location's pressure (hPa) at sea level
bme280.sea_level_pressure = 1013.25
while True:
print("\nTemperature: %0.1f C" % bme280.temperature)
print("Humidity: %0.1f %%" % bme280.relative_humidity)
print("Pressure: %0.1f hPa" % bme280.pressure)
print("Altitude = %0.2f meters" % bme280.altitude)
time.sleep(2)
API documentation for this library can be found on Read the Docs <https://docs.circuitpython.org/projects/bme280/en/latest/>
_.
For information on building library documentation, please check out this guide <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/sharing-our-docs-on-readthedocs#sphinx-5-1>
_.
Contributions are welcome! Please read our Code of Conduct <https://github.com/adafruit/Adafruit_CircuitPython_BME280/blob/main/CODE_OF_CONDUCT.md>
_
before contributing to help this project stay welcoming.