.. image :: https://img.shields.io/discord/327254708534116352.svg :target: https://adafru.it/discord :alt: Discord
This cookiecutter creates a project structure for an Adafruit CircuitPython library.
See this Adafruit Learn Guide for an explanation of creating a CircuitPython library: Creating and sharing a CircuitPython library <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/overview>
The section for using cookiecutter is here <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/creating-a-library#cookie-cutter>
.
.. note::
The above Learn Guide is directed towards creating a library for the Community Bundle. For libraries meant for the Adafruit Bundle, contact the CircuitPython Helpers (@circuitpython helpers) on Discord or put in a new issue on the Adafruit_CircuitPython_Bundle GitHub repository.
.. code-block:: bash
pip install cookiecutter~=2.1
cookiecutter gh:adafruit/cookiecutter-adafruit-circuitpython
Then, fill in the prompts and accomplish some post generation cleanup:
target_bundle
- Adafruit bundle or Community library bundlegithub_user
- GitHub user or organization which will host this repo. For example, Adafruit funded libraries should say "adafruit" here.author_name
- Who you are! Sets the copyright to you.company
- Used to give Copyright credit to the company funding the library. For example, Adafruit funded libraries should say "Adafruit Industries" here.library_name
- Shortest name for the library. Usually a chip name such as LIS3DH.library_description
- Write a sentence describing the purpose of this library (e.g. CircuitPython helper library for the DC & Stepper Motor FeatherWing, Shield and Pi Hat kits.
).library_keywords
- Used to populate keywords for PyPi. Enter a string of keywords (e.g dht temp humidity
) NOTE: The following are included by default: adafruit
, blinka
, circuitpython
, micropython
, and the library_name
you enter.library_prefix
- Used to prefix the code to the organization creating the library. For example, Adafruit supported libraries should say "adafruit" here. Do not add a - or _.adafruit_product_id
- The product ID for the Adafruit product includes a link to the product in the README. Only applies to Adafruit Bundle.requires_bus_device
- Determines whether to add comments about a dependency on BusDevice <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>
_.
If the library uses BusDevice, enter y
or yes
to include. If the library doesn't use BusDevice, all other entries including empty, will not include BusDevice.requires_register
- Determines whether to add comments about a dependency on Register <https://github.com/adafruit/Adafruit_CircuitPython_Register>
_.
If the library uses Register, enter y
or yes
to include. If the library doesn't use Register, all other entries including empty, will not include Register.other_requirements
- Adds any other module dependencies for PyPi. Enter a comma separated string of modules
(e.g. adafruit-circuitpython-pca9685, adafruit-circuitpython-motor
). NOTE: Adafruit-Blinka
is always included, so no need to include it here.sphinx_docs
- Should the Sphinx based documentation be included in your repo? If so, enter y
or yes
to include the setup.py. For Adafruit libraries this defaults to Yes.After generation, make sure to glance over the files to make sure they
autogenerated as you expect (such as capitalization). There are a few places
with .. todo::
that should also be taken care of. After adding or updating
the information requested, make sure the .. todo::
text is removed. Like this:
.. code::
# Before Cleanup
.. todo:: Describe what the module does
.. code::
# After Cleanup
This library talks to the AM4Z-1NG sensor. Typical use is for robot friends.
.. note::
If you are not uploading the repository for Adafruit (i.e., the Community bundle), and you
wish to use the Release feature on GitHub to upload libraries to PyPI, you will need to
add your PyPI token to the repository secrets. Set a secret named ``PYPI_USERNAME`` to
``__token__`` and a secret named ``PYPI_PASSWORD`` to your API token with the proper scope.
Never share your API token anyone!
Due to the development nature of cookiecutter, there are some limitations when using with Windows.
The Python enviornment can be tricky sometimes in Windows. Use this documentation page for steps and tips on Windows installation: Cookiecutter Installation - Windows <https://cookiecutter.readthedocs.io/en/latest/installation.html#windows>
_