search

adnovea / solarman_lse

Home Assistant component for interacting with Solarman LSE type Stick loggers.
Apache License 2.0
4 stars 0 forks source link

readme

Solarman integration for Ethernet LSE Stick Logger

Home Assistant component for interacting with Solarman LSE (Ethernet type) Stick loggers.

Version 99.0.0

[!NOTE] BEFORE considering using this add-on :

if you have a LSW (wifi) Stick Logger, this add-on won't work. Please use home_assistant_solarman

if you have a LSE (Ethernet) Stick Logger and a Deye or Sunsynk inverter, you better try first the Sunsynk add-on.

Foreword

I tried the Sunsynk add-on, but I encountered long pauses (10-30 mins) in the data recovery that made the add-on useless. I created a MODS of the old home_assistant_solarman add-on version to support the LSE Stick loggers, but unfortunately, the new version is based on the SolarmanV5 lib and not easy to modify (I'm not a Python developer, just a handyman). I decided to "fork" the excellent home_assistant_solarman project to fit my needs and share it on Github.

The scope is not to maintain a Nth Add-on version but only to share my solution.

This code was developed on a Deye Sun 5K SG03LP1 but could run with other inverters such as SunSynk ones.

[!CAUTION]

DISCLAIMER: Use at your own and sole risks! Especially when writing any inverter's registers.

Installation

Please refer to the manual installation instructions.

Sorry, HACKS is not supported.

Integration

Solarman LSE uses the same sensors suffix as Home Assistant Solarman, and works well with the nice Sunsynk-Power-Flow-Card below:

image

You can create your own Card with commands for controlling your inverter (be careful when writing settings because this can irrevocably damage your inverter).

Each command is sent to the invert BUT the corresponding entities will be updated only at the next read (every +/- 1 minute!!!). Don't repeat the command before at least 1 minute.

Here is a Card example for my Deye (create your):

image

DEYE Sun 5K

For the Deye Sun 5K inverter owners, you have to:

My Deye Sun 5K sensors for Sunsynk-Power-Flow-Card add-on:

entities:
  use_timer_248: switch.LSE_time_of_use
  priority_load_243: switch.LSE_priority_mode
  inverter_voltage_154: sensor.sensor.LSE_grid_voltage_l1
  load_frequency_192: sensor.LSE_load_frequency
  inverter_current_164: sensor.LSE_current_l1
  inverter_power_175: sensor.LSE_inverter_l1_power
  grid_connected_status_194: sensor.LSE_grid_connected_status
  inverter_status_59: sensor.LSE_running_status
  day_battery_charge_70: sensor.LSE_daily_battery_charge
  day_battery_discharge_71: sensor.LSE_daily_battery_discharge
  battery_voltage_183: sensor.LSE_battery_voltage
  battery_soc_184: sensor.LSE_battery_soc
  battery_power_190: sensor.LSE_battery_power
  battery_current_191: sensor.LSE_battery_current
  grid_power_169: sensor.LSE_internal_ct_l1_power
  day_grid_import_76: sensor.LSE_daily_energy_bought
  day_grid_export_77: sensor.LSE_daily_energy_sold
  grid_ct_power_172: sensor.LSE_external_ct_l1_power
  day_load_energy_84: sensor.LSE_daily_load_consumption
  essential_power: sensor.LSE_load_l1_backup_power
  essential_load1: none
  essential_load2: none
  nonessential_power: sensor.LSE_load_l1_home_power
  non_essential_load1: none
  non_essential_load2: none
  aux_power_166: sensor.LSE_gen_power
  aux_load1: none
  aux_load2: none
  aux_connected_status: sensor.LSE_aux_connected_status
  day_aux_energy: none
  day_pv_energy_108: sensor.LSE_daily_production
  pv1_power_186: sensor.LSE_pv1_power
  pv2_power_187: sensor.LSE_pv2_power
  pv3_power_188: none
  pv4_power_189: none
  pv_total: null
  pv1_voltage_109: sensor.LSE_pv1_voltage
  pv1_current_110: sensor.LSE_pv1_current
  pv2_voltage_111: sensor.LSE_pv2_voltage
  pv2_current_112: sensor.LSE_pv2_current
  pv3_voltage_113: none
  pv3_current_114: none
  pv4_voltage_115: none
  pv4_current_116: none
  remaining_solar: none
  battery_temp_182: sensor.LSE_battery_temperature
  radiator_temp_91: sensor.LSE_ac_temperature
  dc_transformer_temp_90: sensor.LSE_dc_temperature
  prog1_time: sensor.LSE_mode_point_1
  prog1_capacity: sensor.LSE_mode_soc_point_1
  prog1_charge: sensor.LSE_mode_grid_point_1
  prog2_time: sensor.LSE_mode_point_2
  prog2_capacity: sensor.LSE_mode_soc_point_2
  prog2_charge: sensor.LSE_mode_grid_point_2
  prog3_time: sensor.LSE_mode_point_3
  prog3_capacity: sensor.LSE_mode_soc_point_3
  prog3_charge: sensor.LSE_mode_grid_point_3
  prog4_time: sensor.LSE_mode_point_4
  prog4_capacity: sensor.LSE_mode_soc_point_4
  prog4_charge: sensor.LSE_mode_grid_point_4
  prog5_time: sensor.LSE_mode_point_5
  prog5_capacity: sensor.LSE_mode_soc_point_5
  prog5_charge: sensor.LSE_mode_grid_point_5
  prog6_time: sensor.LSE_mode_point_6
  prog6_capacity: sensor.LSE_mode_soc_point_6
  prog6_charge: select.LSE_mode_grid_point_6
  energy_cost_buy: none
  energy_cost_sell: none
  solar_sell_247: sensor.LSE_energy_selling

Troubleshooting